The Passive Transmitter Repeater DC 58 is used for powering of 2-wire transmitters and isolation of 4 ... 20 mA standard signals.
The 24 V power from the control system is transferred to the 2-wire transmitter with low voltage drop. The transmitter loop current is available galvanic isolated on output of the DC58. Additionally the measuring input accepts active 4 … 20 mA signals from 4-wire transmitters.
- Only 60 mm installation depth, 11.2 mm wide
- Galvanic isolation across input and output
- Protective Separation acc. to EN 61140
- 5 Years Warranty
- No power supply required
- Cost optimized design
No information Available.