High resolution of low oxygen concentrations, simple and cost-efficient sensor calibration in ambient air. No calibration gases. High signal stability, also in the presence of high CO2 partial pressures. FDA-conforming material with an extremely smooth polished surface. Simple maintenance due to modular design. Sterilizable, autoclavable, and CIP capable. Also suitable for hazardous locations.
The SE 555 digital pH sensor comes with a special pH glass with high impedance for high-temperature applications and a low alkali error. The sensor is CIP- and SIP-capable. The silver ion trap prevents silver sulfide precipitation and junction fouling in media containing sulfides. This makes the sensor ideal for routine applications in food processing and biotechnology. Additionally, Memosens technology offers all well-known advantages concerning the operation and sensor diagnostics.
The SE 555 pH sensor comes with a special pH glass with high impedance for high-temperature applications and a low alkali error. The sensor is CIPand SIP-capable. The silver ion trap prevents silver sulfide precipitation and junction fouling in media containing sulfides. This makes the sensor ideal for routine applications in food processing and biotechnology.
The SE 555 pH sensor comes with a special pH glass with high impedance for high-temperature applications and a low alkali error. The sensor is CIPand SIP-capable. The silver ion trap prevents silver sulfide precipitation and junction fouling in media containing sulfides. This makes the sensor ideal for routine applications in food processing and biotechnology.
The electro-pneumatic controller for fully automated pH measurement and cleaning. Maximum availability of the point of measurement: Cleaning without interrupting the process, even when measuring directly in the pressure tank.
MemoRail Modbus is a space-saving transmitter with Modbus RTU interface in a 17.5 mm modular housing. Available as a 1- or 2-channel version for operation with contactless Memosens sensors as well as the SE 80 digital conductivity sensor and the SE 740 optical oxygen sensor. The compact multi-parameter analyzer supports a variety of process variables:
High accuracy, stability, rapidness, and a long life cycle are achieved by the special design. Through 2 open junctions, the reference system is in direct contact with the measured medium. There is hardly any risk of contamination or blocking of the junction. The high content and special distribution of potassium chloride in the polymer reduces measurement disturbances which could be caused by liquid junction potentials.
High resolution of low oxygen concentrations, simple and cost-efficient sensor calibration in ambient air. No calibration gases. High signal stability, also in the presence of high CO2 partial pressures. FDA-conforming material with an extremely smooth polished surface. Simple maintenance due to modular design. Sterilizable, autoclavable, and CIP capable. Also suitable for hazardous locations.
Retractable fitting with ceramic sealing to the process for maximum measuring point availability. For measurement in highly viscous, abrasive, fibrous, or clogging process media. The no-wear process sealing and modular construction of the retractable fittings allow the drive to be disassembled for sensor adjustment, cleaning, or replacement during the ongoing process. Particularly in conjunction with the automatic cleaning and calibration system, Ceramat achieves maximum measuring point availability with minimum maintenance effort. Also ideal for measurement with optical sensors.
The SensoGate® WA 131 M has a manual rotary drive, which enables the fitting to be operated up to a counter pressure of 10 bar – and this in less than two turns. Regardless of how unfavorable the angle or the operating height at which the fitting is installed, the low rotary forces can easily be applied using the wrist. This is not possible with the sliding motion of conventional fittings.
MemoRail is the first genuinely compact, digital analyzer for measuring pH values, ORP, conductivity, oxygen and temperature with Memosens sensors. Two analog active / passive 4 to 20 mA outputs supply the measured values for the process value and temperature to the process control system or a PLC. MemoRail is immediately ready for measurement on connecting a precalibrated Memosens sensor. “Used” sensors can simply be replaced. The highly space-saving modular housing of the MemoRail devices is only 12.5 mm wide.
Portavo 907 Multi Oxy optionally features a powerful Li-ion rechargeable battery that can be charged via USB directly in the device. The clear sensor diagram provides an at-a-glance view of the sensor condition.Portavo 907 Multi Oxy proves that high functionality and ease of use do not exclude one another. It guides you step by step through the calibration procedure. Technical terms are clearly explained in the context help.If equipped with the multi-channel option, Portavo 907 Multi Oxy can be used for simultaneous measurements using 2 flexibly combined sensors. The multi-channel function is added to the functionality of the data logger.
Stratos Evo is the latest evolutionary stage of analyzers. The 4-wire multi-parameter device for measuring pH value, ORP, conductivity (conductive or inductive) or dissolved oxygen. The high-performance highPower broad-range power supply allows the operation with optical oxygen sensors. The HighPower supply offers another advantage thanks to the option of also supplying external 2-wire transmitters, for example pressure or flow transmitters. The respective signal can be displayed and processed via the 4 ... 20 mA input.
The special design provides high accuracy, stability, speed, and a long life cycle. Through 2 open junctions, the reference system is in direct contact with the measured medium. There is hardly any risk of contamination or blocking of the junction. The high content and special distribution of potassium chloride in the polymer reduces measurement disturbances which could be caused by liquid junction potentials.
Our pH Probe system is a revolutionary technology that can measure the acidity or alkalinity of a given liquid. This device is incredibly precise and reliable, allowing us to get accurate readings in real-time. The smart probe design allows users to monitor these levels with ease, while also reducing calibration time and cost. Additionally, data from multiple probes can be wirelessly transmitted over various distances with minimal lag time. With our unique pH Probe system, businesses are guaranteed more efficient sample handling for all their testing needs.
Portavo 907 Multi Cond can be used with digital Memosens conductivity sensors, analog 2-electrode sensors, and analog 4-electrode sensors. The powerful Li-ion rechargeable battery can be charged via USB in the device. The clear sensor diagram provides an at-a-glance view of the sensor condition. If equipped with the multi-channel option, Portavo 907 Multi Cond can be used for simultaneous measurements using 2 flexibly combined sensors. The multi-channel function is added to the functionality of the data logger.
The electro-pneumatic controller for fully automated pH measurement, cleaning, and calibration In combination with the Protos process analysis system and the SensoGate or Ceramat sensor lock-gates, Unical o ers the ideal functionality of a complete system for automatic process control of a pH measurement. It allows highly accurate measurements to be taken, even with di cult process conditions such as high pressure, high temperatures, and high levels of impurities. The system can be installed next to the process, within the hazardous area.
Portavo 907 Multi pH enables versatile and flexible use. In combination with digital Memosens sensors, the following process variables are supported: As soon as the Memosens sensor is connected, the Portavo 907 Multi pH automatically adjusts to the selected parameter. All relevant sensor data can be seen at a glance. Analog pH/ORP sensors can also still be used, if required.
Thanks to its ground-glass sleeve junction even applicable in heavily contaminated media. Designed for MemoRail applications. High stability and a long life cycle are achieved by the special design. Through a ground-glass sleeve junction, the reference system is in direct contact with the measured medium. There is hardly any risk of contamination or blocking of the junction. Measurement is possible even at low temperatures thanks to a special low-impedance glass.
Axis India is proud to introduce their new Memosens cutting edge sensor technology. This innovative technology offers superior detection of pH levels and other water-related parameters, aiding in the optimization of processes and far exceeding previous standards. Developed to provide highly accurate reliable readings in harsh, tough environments, Memosens technology can withstand extreme temperatures and humidity, vibration, pressure pulses, and chemical interference - meaning it's guaranteed to outlast many existing systems. Because of its superior quality and user-friendliness, Memosens has become a trusted name in the industry for accurate process control results. With Axis India's cutting edge sensor technology you can rest assured that your water clarity will be second to none.
High accuracy, stability, rapidness, and a long life cycle are achieved by the special design. Through 2 open junctions, the reference system is in direct contact with the measured medium. There is hardly any risk of contamination or blocking of the junction. The high content and special distribution of potassium chloride in the polymer reduces measurement disturbances which could be caused by liquid junction potentials.
Premium Knick technology now in high-performance basic versions: The new Stratos Eco series is designed for use in almost all standard applications. The reliable 4-wire devices for measuring pH value, conductivity, or dissolved oxygen are the result of our highly efficient product development process.
The SE 715 oxygen sensor with Memosens connector system requires low maintenance and is equipped with a temperature detector. The sensor is designed for the simultaneous measurement of dissolved oxygen and temperature in industrial processes.
With its exceptional range of functions and application-oriented design, Stratos is well-established in the entire chemicals industry, in process and power plant engineering and in the pharmaceutical and biotechnology industries. With its outstanding quality and diversity of equipment, the Stratos Pro series is the reference in 2-wire technology for process analytics. Stratos Pro is suitable for wall, pipe or panel mounting. The rear unit can be pre-assembled, all parts are easily accessible thanks to the large terminal compartment.
Flanged immersion heaters are used in process engineering, cleaning technology, chemical industry, plastics industry, as well as in mechanical engineering and shipbuilding.
Flange heaters are particularly suitable for heating water, caustic solutions, heat transfer liquids, heavy oil, asphalt, turbine oil, and hydraulics oil.
Today, industrial environments without electric heating technology are unthinkable. From various drying processes to the textile industry, in rail borne and maritime traffic technology, in mechanical engineering and plant engineering, everywhere it is a matter of course to realize thermal tasks with electric heating technology.
There are other options for the generation of heat, of course, e.g. the combustion of gaseous, fluid, or solid fuels (natural gas, diesel fuel, coal), waste heat utilization. It is up to you, the user, to decide which method is the most appropriate for you, taking into account aspects such as economic viability, availability of energy, and environmental protection.
Today, industrial environments without electric heating technology are unthinkable. From various drying processes to the textile industry, in rail borne and maritime traffic technology, in mechanical engineering and plant engineering, everywhere it is a matter of course to realize thermal tasks with electric heating technology.
There are other options for the generation of heat, of course, e.g. the combustion of gaseous, fluid, or solid fuels (natural gas, diesel fuel, coal), waste heat utilization. It is up to you, the user, to decide which method is the most appropriate for you, taking into account aspects such as economic viability, availability of energy, and environmental protection.
IDEAL DIRECT HEATING, protection mode IP 34
The main field of application: Temporary or permanent heating for workmen’s huts, garages, stores, and workshops.
Air heaters of series 850 for round ducts are designed for direct heating of flowing air and non-flammable gases and mixtures. Typical applications are in the field of ventilation and air conditioning as well as in drying equipment and process engineering. Air duct heaters in this design are used for overpressure up to 10 mbar. For higher pressures, we design air heaters gas-tight welded according to Series 803 or as electric circulation heaters.
Circulation heaters are used in process engineering, cleaning technology, chemical industry, plastics industry, as well as in mechanical engineering and shipbuilding.
Heater vessel made of steel, boilerplate or stainless steel. The position and dimensions of the flanged inlet and outlet nozzles are adapted to the specific requirements. Seals are supplied according to requirements or customer’s specification.
Ex room heater have 1 cable gland in the standard variant! On request our ex room heater are manufactured with two cable glands and an additional terminal for the direct connection of a room thermostat.
Corrugated finned radiators are and remain the most economical solution for heat transfer with electric heaters. With the procedure of winding corrugated steel strips around various tube qualities, we achieve extremely large tube surfaces and respectively low surface temperatures. We use this combination to manufacture explosion-proof room heater on a high quality level.
For pressure reservoirs made of refined steel or enameled steel and anode screw-in type heaters, ERCTBi will be used. In this finish, the tubular heaters are mount galvanic isolated from gland G 1 1/2". Thereby, the protection current is prevented by the tubular heaters and the cathodic corrosion protection of the container barrier remains.
Application: heating of workshops, store halls, operating locations Consisting of:
Protection mode IP 54, Transportable
Air heaters of series 802 are designed for direct heating of gaseous incombustible flowing air. Typical applications are in the field of ventilation and air conditioning as well as in drying equipment and process engineering. Air duct heaters in this design are used for overpressure up to 10 mbar. For higher pressures, we design air heaters gas-tight welded according to Series 803 or as electric circulation heaters.
For a perfect control of our heaters, we recommend our CSN® Standard Control System for Air Heaters 810/4-63
Air heaters of series 803 for round ducts are designed for direct heating of flowing air and non-flammable gases and mixtures. The heaters consist of a rectangular steel housing with conical transition pieces; connections are gas-tight welded. For higher operating temperatures the electric terminal enclosure will be mounted at a distance from the heating chamber, the space between can be thermally insulated.
Supporting brackets for both vertical and horizontal mounting can be attached. Typical applications are in the field of ventilation and air conditioning as well as in drying equipment and process engineering. Duct heaters of this design are used with pressure greater than 10 mbar. For pressures > 0,5 (bar) our electric circulation heaters are used.
Air heaters of series 804 are specially designed for use in heating, ventilation, and air conditioning technology. Due to the lightweight design, these units offer ideal conditions for heating flowing air. As a standard, the bolted duct consists of aluminum sheet AlMg 3, with circumferential flange without bores according to DIN 24158, Sheet 3, row 3. The flange width ranges from 25 and 35 mm. The heating insert consists of exchangeable non-radiating tubular heating elements.
Tubular heater, 8,5 mm diameter, of special steel 1.4571, with supporting handle, protection mode IP 67, hose proof, lead-in 3 x 1,5 sq. mm, with plug with earthing contact (up to 3 KW), as well as holding clip.
The heater is to be introduced into liquid in a suspended vertical position, using the holding clip, while the liquid level must not be lower than the minimum depth of immersion.
Application:
Air heaters Type 800 are electric heater batteries for installation in existing ducts mainly in drying equipment and in the thermal process technology. Heating is provided by CSN® heat grids that are installed vibration and shock resistance. The absorbed energy is converted directly into heat, without the inertia, very common, for example, with tubular heating elements. The large heat-generating surface ensures a good heat transfer to the flowing air.
The CSN®-cartridge type heating elements and bath heaters are manufactured for nominal voltages from 110 up to 690 volts D.C. and A.C. In the case of higher heating capacities 3 or more elements each, being individually divisible by the factor 3 can be star or delta connected to 230 and 400 volts A.C. three-phase mains. At 12 kW and a related length, the elements are fabricated for 400 volts A.C. three-phase delta connections. In any case, the desired voltage and type of currency have to be stated.
The capacity, indicated in the schedules by 3 watts/cm2 loading of the pipe surface area intended for water and liquids similar to water or thin-bodied oil respectively up to 100 °C. In the event of higher temperatures or other media, the surface load is reduced.
For a perfect control of our heaters we recommend our CSN® Standard Control System for Air Heaters 820/6-48
Application for air heater type 841: E.g. punctiform heating of working places, thermal shielding at doors, heating of building containers, and dressing rooms. Consisting of a sheet steel housing, built-in high-capacity heating elements, not brought to red heat an axial-flow fan.
The CSN® screw-in heaters including protection against dry operation must be screwed-in horizontally in a borehole with the S.P. internal thread 1½˝ such, that the probe of the protection against dry operation is situated at the highest position of the installed equipment.CSN® screw-in heaters with protection against dry operation are particularly suitable for calefaction of water (max. 100 °C/max. 10 bar) in vessels or reservoirs with extremely changing filling heights. By means of the built-in protection against the dry operation, the damage of the heating element due to too low a liquid level is prevented.
Material 1.4404, brass screw-in nipple S.P. thread 1½" with thermostat 0 – 85°C 1 pol. or 30 – 110°C 1 pol.
WALL MOUNTING BRACKETS: Description: Mounting bracket for safe wall fixing. It includes the sealing washers to guarantee the IP rating. DOOR STOP: Description: Door stop for height 300mm enclosures and above. To secure the door in an open position allowing a 90° or 110° opening. Mounted directly to the door profile studs. Machining is required.
ZONEX enclosures deliver a robust solution for termination and junction enclosure applications in potentially hazardous locations, including:
Hoffman excels at modifying and customizing ZONEX products to your specifications while maintaining ATEX and IECEX certifications. Contact your local Hoffman sales office or distributor for complete information. Hoffman offers:
When selecting an enclosure, the application can be associated with a market or product. For example, is your enclosure going to be used in a petrochemical refining plant, a food manufacturing system, or an industrial location? Regarding the product, does your application require any further accessories, pendant arm mounting, or easy access? Hoffman offers a full selection of enclosures and accessories for your application.
Type 304 or Type 316 Stainless steel used in either indoor or outdoor applications that require corrosion protection from chemicals & water. These enclosures feature streamlined styling with an attractive stroked finish combined with aesthetically hidden hinges, seamless foam-in-place gasket, and Quarter-turn latches furnished with flush slotted insert for secure closure Available in single double door construction along with a wide range of accessories.
The MultiMount range of mild steel IP66 wall-mounted enclosures has been designed with the user in mind. Practical, efficient, and with a wide range of standard sizes and accessories available from stock, the MultiMount range offers a solution to virtually every application or can be easily customized to suit specific requirements. Material: Body: 1.2mm mild steel / 1.4mm MAS0606021R5 and above /1.5mm MAS1001230R5 and above, and 400mm depth enclosure, Gland plate: 1.4mm mild steel. Door: 1.2mm mild steel / 1.4mm MAS0606021R5 and above /1.8mm MAS1006026R5 and above. Mounting plate: 2mm galvanized steel.
The MultiMount range of mild steel wall mounted enclosures is also available in double door versions, and complies with IP 55. There are 5 sizes available and a range of accessories. The standard finish is RAL 7035, although other colours and sizes are available on request. MADO608030R5 /1.5mm MADO801230R5 and above. Gland plate: 1.4mm mild steel. Doors: 1.4mm mild steel / 1.8mm MADO801230R5 and above. Mounting plate: 2mm galvanized steel / 2.5mm MAD1001030R5 and above. Lock: Custom lock with double grip for easy opening of the door, double-bit 3mm insert and 90° movement. Espagnolette three point locking. Other Inserts are available as an accessory.
PROLINE features a comprehensive set of standard components and accessories. These standard components can be used to create a custom enclosure uniquely suited to your application. For more information on optional standard components and accessories, refer to the PROLINE Configuration Handbook.
The PROLINE Gold Series Desk Console provides an ideal surface for mounting a HMI or HMI controls such as keyboards, switches, or lights or HMIs. I it is ergonomically designed so operators can sit or stand while working.
The latest Hoffman-branded enclosure from Pentair has been specially designed for housing systems with large components or complex mounting configurations – in harsh environments. Three-point latching and sealing provide industry-leading protection from dust, dirt, oil and water. The enclosure is for housing motor starters, drives, contactors and PLCs, as well as a wide variety of other electrical and electronic equipment. It is used extensively in oil and gas, pulp and paper, chemical, food and beverage, pharmaceutical, textile and similar industries. The new design with double access is ideally suited for the mounting of physically large, heavy duty devices where tight sealing (IP rate) is important.
The mild steel double door combinable floor standing enclosure range, MCD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors’ loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for many different applications.
Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature changes. In the case of negative pressure or partical vacuum, dust and humidity can enter the enclosure through the door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape the enclosure. The easy-to-install pressure compensation device DA 284 provides compensation of pressure at a protection degree of IP66. Even with a slight overpressure, a waterproof membrane inside the plug allows the humidity to escape whilst blocking water and dirt from entering the enclosure.
Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature changes. In the case of negative pressure or partical vacuum, dust and humidity can enter the enclosure through the door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape the enclosure. The easy-to-install pressure compensation device DA 284 provides compensation of pressure at a protection degree of IP66/IP67. Even with a slight overpressure, a waterproof membrane inside the plug allows the humidity to escape whilst blocking water and dirt from entering the enclosure.
It has become increasingly important to provide a protected enclosure environment for valuable and crucial electrical and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation. When this occurs, the risk of dust and humidity ingression into the control panel increases dramatically. The specially designed DA 084 vent plug permits a controlled change in pressure and can easily be installed in any enclosure. The vent plug is suitable for the use in enclosures and electrical cabinets in accordance with DIN EN 62208.
Pressure differentials in a hermetically sealed enclosure are a result of the heat generated by electrical and electronic components in the enclosure, as well as the fluctuation of the outside temperature. In the case of negative pressure or vacuum, for example, dust and humidity can enter the enclosure trough the door seal. The DA 284 Vent Plug provides a protected enclosure environment for valuable and crucial components with a UL 4X rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The NIR Borescope (NIR-B) 3XR is a short wavelength radiometric infrared borescope imaging camera for steam reformer and cracker tube continuous temperature measurement and furnace optimization and monitoring. Building on more than twenty years of thermal imaging experience, AMETEK Land has continued to widen its range of temperature measurement solutions by launching the NIR Borescope 3XR. The high-resolution image combined with the wide angle field of view (90-degree) allows multiple reformers or cracker tubes in the lane to be imaged and measured simultaneously. The NIR-B 3XR is an invaluable tool in prolonging reformer tube lifetime, optimizing production throughput, and reducing energy consumption.
Pressure differentials in a hermetically sealed enclosure are a result of the heat generated by electrical and electronic components in the enclosure, as well as the fluctuation of the outside temperature. In the case of negative pressure or vacuum, for example, dust and humidity can enter the enclosure through the door seal. The DA 284S Stainless Steel Vent Plug provides a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The DIN rail mounted electrical receptacle can be quickly fitted and connected in enclosures allowing the use of auxiliary products such as hand lamps and power tools. The unit is available with and without fuse, and in many world outlet standards.
STEGOFIX PLUS allows for a quick and easy direct mounting of smaller devices where DIN Rails may be inconvenient, i.e. in cabinets and enclosures. It is suitable for devices with a DIN clip of 66m/2.6” width max., replacing the conventional 35 mm/1.4” DIN rail. STEGOFIX PLUS is available in three different mounting versions –for screw mounting with 25 mm/98” pitch, with high-performance adhesive tape or rubberized neodymium magnets – offering the right mounting method for almost any application
The range of four lenses enables viewing of any target, at any distance with outstanding image clarity. Coupled with this is the wide ambient temperature operating range making ARC suitable for everything from bench top monitoring to the most demanding industrial applications ARC uses remote motorised focus allowing quicker installation and safer and convenient operation.
STEGOFIX is a small aid specially designed to make mounting of smaller DIN rail mountable components easier. It can be used whenever the installation of a DIN rail is impractical, or when there is not enough space left in an enclosure. Because of its industrial grade self-adhesive it can be installed much easier and quicker than a conventional DIN rail, without the effort of hole drilling and screw mounting. This is especially practical for subsequent changes or additions in an already equipped enclosure. STEGOFIX can hold components up to 1.1 lbs in weight. Some of the many applications include the mounting of timing relays, series terminals, thermostats, cable channels and even small heaters. In addition, DIN rails can be mounted simply by using several STEGOFIX units. If the weight of attached components exceeds the load limit, or if a more secure mounting is desired, (e.g. on rough surfaces), it can also be screw-mounted. All that is necessary to install STEGOFIX is a smooth and clean surface. The initial adhesive power is 40%, and after 24 hours, it has its full holding power of 1.1 lbs.
The door switch monitors the position of cabinet doors and is available in three versions. For example, it can be used for switching a light when opening a door (NC), or to activate a fan when closing a door (NO). The version with change-over contact (CO) can be used as a normally closed and/or normally open contact. The wide mechanical adjustment range of the door switch DS 013 offers versatile mounting: the housing is adjustable within a 1-3/8" (35 mm) range, while the screw flange with a slotted hole offers an additional 13/16" (21 mm). The travel of the switch itself is another 5/16" (8 mm).
Condensation can occur in enclosures with high protection types by variations in temperature. The use of a DD 084 drainage device allows the removal of the condensate without losing the maximum IP66 protection type. The specific characteristic of the water permeable membrane ensures the drainage of the condensate via capillary action. The unique construction also prohibits the ingression of splash water into the enclosure. Additionally, the drainage device effectively provides pressure compensation with variations in temperature.
Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature changes. In the case of negative pressure or partial vacuum, dust and humidity can enter the enclosure through the door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape the enclosure. The innovative and easy-to-install ventilation cable gland DAK 284 enables secure cable entry into an enclosure with simultaneous pressure compensation (protection type IP66 / IP67). Even with a slight overpressure, a waterproof filter inside the gland allows the humidity to escape whilst blocking water and dirt from entering the enclosure.
Using advanced high-resolution thermal imagers and thermal imaging systems, modern production processes can be controlled with a very high level of precision to improve product quality, increase production efficiency, and meet increasing quality and efficiency requirements. Thermal imaging combines the advantages of highly accurate online temperature measurement with high-resolution measurement of temperature distributions to identify hot and cool spots for process optimization and the early detection of process deviations. For heavy-duty industrial environmental conditions, an extensive range of protection, and cooling enclosures, and mechanical and electrical accessories are available to ensure the systems work reliably 24/7. Models available: NIR-656: NIR-2K:
The DCM 010 is used to control DC powered devices with high capacities in control and switch cabinets. It is controlled via an external potential-free contact (thermostat or hygrostat), which is connected between terminal 3 and 4. It must be ensured that the external contact is suitable to switch the required signal current without any problems.
Many materials that are transported on conveyors contain hot inclusions. These hot objects can damage belts or cause belt or material fires. Traditional temperature measurement methods are unable to detect small hot spots on a moving conveyor. A method of detecting these developing hot spots and sending an alarm to the process operators would prevent costly shutdowns. Traditional methods such as visual inspection and single-point pyrometers do not have the speed nor the resolution to meet the application demands. The HotSpotIR High-speed Scanning System is used to detect these emerging hot spots. The HotSpotIR makes 100 high-resolution temperature scan lines every second. while the hottest point measured is updated and output to the alarm processor every one-hundredth of a second. The system covers a measuring range of 68 to 482 °F / 20 to 250 °C.
The electronic thermostat with an integrated switch module is used to control DC-powered devices with high capacities in control and switch cabinets. Heaters, coolers, filter fans, or signal devices can directly be controlled via an internal electronic circuit. The external sensor can be positioned freely anywhere in the control cabinet for precise temperature measurements. Additionally, this thermostat is available in versions that not only measure temperature via the external sensor but also the relative humidity.
KTO 111: Thermostat (NC); Contact Breaker for regulating heaters. The contact opens when the temperature is rising. KTS 111: Thermostat (NO); Contact maker for regulating fans filters and heat exchanger or for switching signals devises when temperature limit has been exceeded. The contact closes when the temperature rises.
Compact, small mechanical thermostat offering a high response accuracy, small switching difference, and a very long service life (switching cycles). This thermostat of temperature class T6 (140 °F / 60 °C max.) is utilized for the regulation of heaters deployed in hazardous areas. The high switching performance allows direct control of a heater.
A compact and sophisticated high accuracy infrared line scanner, LSP-HD offers highly accurate temperature measurements by producing advanced thermal images of moving processes and is available in a range of application-specific models. Offering industry-leading scanning performance of 1000 samples even at scan speeds as high as 150 scans per second, LSP-HD sets a benchmark for process imaging definition, detecting even the smallest temperature differences for improved process control and consistent product quality. Integration is simple: a single Ethernet data connection straight from the sensor head removes the requirement for a separate processor, while the adoption of Power over Ethernet technology (PoE) means all electrical connections are made using just one Ethernet cable. As the scanner requires just one cable installation costs are significantly reduced. Backwards compatible with pre-existing AMETEK Land Infrared Linescanner installations, LSP-HD is available in a number of models, each optimised for a specific range of industrial applications in the glass, industrial processing and steel industries.
The ZR 011 houses two separate thermostats, allowing the independent control of heating and cooling or other equipment. Thermostat NC (normally closed): Thermostat opens at temperature rise – for regulating heaters or for switching signal devices. Comes with red temperature dial. Thermostat NO (normally open): Thermostat closes at temperature rise – for regulating filter fans and heat exchangers or for switching signal devices. Comes with blue temperature dial.
The electronic hygrostat is used for controlling heating and cooling equipment, filter fans, or signal devices through the Relay SM 010 or a similar device. The hygrostat registers the surrounding relative humidity and can switch a signal current via an internal relay with a potential free change-over contact. The LED integrated into the adjustment knob shows the closed status of the contact 1-2. When the relative humidity drops contact 1-2 opens and the LED turns off. In current less state (no supply voltage) contact 1-2 opens.
Two thermostats in one housing: Tamperproof (Pre-set) Thermostat NC (normally closed): Thermostat opens on temperature rise (red module housing) – for regulating heaters or for switching signal devices when the temperature has fallen below the minimum value. Tamperproof (Pre-set) Thermostat NO (normally open): Thermostat closes on temperature rise (blue module housing) – for regulating filter fans, heat exchangers, cooling devices, or for switching signal devices when temperature limit has been exceeded.
Using camera quality Through-The-Lens sighting, what you see is what you measure. The single handed, ergonomic design enables you to make temperature measurements in hostile environments. Hold on to a hand rail and simultaneously take safe and accurate temperature readings. The high quality fully focusable lenses ensure the smallest spot size measurements at any distance. On-board datalogging means accurate measurements are stored directly to the instrument. ALL PROCESSED TEMPERATURE VALUES ARE SHOWN CONTINUOUSLY ON THE DISPLAY WHEN THE TRIGGER IS PRESSED. • Peak temperature • Continuous temperature • Average temperature • Valley temperature • Meltmaster temperature Logger Software Transfer data to a computer or rugged mobile device running Cyclops Logger software in order to view, analyze and record live temperature readings. All stored measurement data can be displayed on the Measurement screen which combines the current reading, table view and trend view.
The ETR 011 electronic thermostat is used for controlling heating and cooling equipment, filter fans, or signal devices. The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via an SPDT contact. The integrated LED is lit when the NC is closed (i.e. connected heater is operating).
The ETF 012 senses the ambient temperature and relative air humidity in an enclosure. Depending on which contact combination is chosen, it then turns on or off a connected device if either the temperature is below or the humidity is above the set point. The integrated LED in each adjustment knob is lit when indicating the active function.
The EFR 012 electronic hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure. The integrated LED is lit when the connected device is in operation.
The electronic DC hygrostat with an integrated switch module is used to control heating and cooling equipment, filter fans, or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity. Additionally, this hygrostat is available in versions that not only measure the relative humidity via the external sensor, but also the temperature.
The ST 011 thermostat is an SPST regulator with small hysteresis. The housing design ensures optimized air circulation around the sensor element. Thermostat NC (normally closed): Thermostat opens on temperature rise (red thumbwheel) – for regulating heaters or for switching signal devices when the temperature has fallen below the minimum value. Thermostat NO (normally open): Thermostat closes on temperature rise (blue thumbwheel) – for regulating filter fans, heat exchangers, cooling devices, or for switching signal devices when temperature limit has been exceeded.
The MFR 012 electro mechanical hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater (dehumidifier), it will energize the heater at the humidity set point in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion. The MFR 012 can also be used to control cooling fans, warning lights, or other devices. The critical relative humidity level for most components is 65%. Above 65% RH, condensation can form and cause malfunctions of electronic equipment. Long term, this can lead to corrosion and permanent damage to electronic components and systems.
Thermostat (NC): Thermostat opens on temperature rise – for regulating heaters or for switching signal devices. Comes with a red temperature dial. Thermostat (NO): Thermostat closes on temperature rise – for regulating filter fans and heat exchangers or for switching signal devices. Comes with a blue temperature dial.
The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices through the Relay SM 010 or a similar device. The thermostat registers the surrounding air temperature and can switch a signal current via an internal relay with a potential free change-over contact. The LED integrated in the adjustment knob shows the closed status of the contact 1-2. When the temperature rises contact 1-2 opens and the LED turns off. In currentless state (no supply voltage) contact 1-2 opens.
The VariTrans P 43000 TRMS are available for any input currents from 100 mA AC to 5 A AC. Analog DC signals are available at the output: 0 ... 20 mA, 0 ... 10 V, and 4 ... 20 mA. The true RMS conversion is performed with high precision up to a crest factor of 5. It operates over a frequency range of 16.7 Hz to 1000 Hz. 16 input/output signal combinations can easily be selected with a rotary encoder switch on the front of the device. There is no need for a complicated on-site adjustment with a screwdriver, calibrator, and multimeter. Drift problems due to unstable trimming components – e.g., potentiometers – are avoided. Thanks to the easy scalability of the range selection, the devices can easily be customized to individual customer solutions. Up to 16 customized signal combinations can be implemented in one device and configured optimally for the respective application.
The WG 21 provides protective separation and high isolation between the input, output, and power supply. The high supply voltage, the good hazardous-area ratings, and the broad-range power supply allow for universal use. Cables up to 1400 m in length can be used without any problems. Thanks to a new transformer-based transmission technique, the WG 21 achieves an extraordinarily high transmission accuracy for hazardous-area applications. The encapsulation provides maximum operating safety, long-term stability, and disruptive strength even under extreme ambient conditions.
The ETF 012 senses the ambient temperature and relative humidity in an enclosure. Depending on which contact combination is chosen, it then turns on or off a connected device if either the temperature is below or the humidity is above the set point. The integrated LED in each adjustment knob i lit when indicating the active function. The external sensor can be positioned freely anywhere in the enclosure for precise measurements.
The VariTrans P 41000 are available for any input voltages from ±60 mV to ±100 V. Unipolar and bipolar (standard) signals are available at the output: ±20 mA, ±10 V and 4 … 20 mA. 16 input/output signal combinations can easily be selected with a rotary encoder switch on the front of the device. There is no need for a complicated on-site adjustment with screwdriver, calibrator and multimeter. Drift problems due to unstable trimming components – e.g., potentiometers – are avoided. Thanks to the easy scalability of the range selection, the devices can easily be customized to individual customer solutions. Up to 16 customized signal combinations can be implemented in one device and configured optimally for the respective application.
The ET 011 is an electronic thermostat for regulating high-performance DC 24 V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (change-over) contact. A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.
The compact Smart Sensor CSS 014 electronically records temperature and humidity and converts the measured data into a standardized analog 4-20 mA or a digital IO-Link signal. The converted value signals can be utilized or further processed by a control or monitoring unit, e.g. a PLC control. The Smart Sensor is suitable for installation inside and outside the enclosure, even in harsh environmental conditions as can be found in the wind power industry: in shielded outdoor areas and exposed to vibrations.
A high level of functional safety can be achieved even in single-channel structure and without diagnostics. For instance, sensors and actuators in safety circuits can be directly connected, requiring no elaborate evaluation equipment for redundant structures. At the same time, the device has a low total failure rate and provides high availability. Its operating principle enables the implementation of a product that combines high functional safety with high availability in a unique way – a balancing act that would otherwise be hard to achieve.
The VariTrans P 41000 TRMS are available for any input voltages from 60 mV AC to 10 V AC. Analog DC signals are available at the output: 0...20 mA, 0...10 V, and 4 ... 20 mA. The true RMS conversion is performed with high precision up to a crest factor of 5. It operates over a frequency range of 16.7 Hz to 1000 Hz. 16 input/output signal combinations can easily be selected with a rotary encoder switch on the front of the device. There is no need for a complicated on-site adjustment with a screwdriver, calibrator, and multimeter. Drift problems due to unstable trimming components – e.g., potentiometers – are avoided. Thanks to the easy scalability of the range selection, the devices can easily be customized to individual customer solutions. Up to 16 customized signal combinations can be implemented in one device and configured optimally for the respective application.
The currents to be measured are associated with system voltages (potentials) which must be safely separated, i.e., galvanically isolated by the shunt isolator. Here, it is important that the voltage measurement is not affected by common mode influences. This can be achieved even for shunt voltages as low as 60 mV by suitably designed shunt isolators. Higher shunt voltages are not necessary with high-quality shunt isolators and because of the physically larger shunt resistors, they are generally not desired.
The measuring ranges of the VariTrans P 29000 are adjusted via DIP switches on the front side of the modular housing. The switch coding is printed on the housing. Calibrated switching is controlled by a microcontroller. This makes for very easy configuration requiring neither calibrators nor other measuring equipment. The user can select from up to 192 switchable calibrated ranges. In addition to the active current or voltage output, a passive current output allows for connection to active PLC inputs. LEDs indicate proper functioning or possible fault conditions, such as exceeding the allowable load voltage at the output. The simple implementation of special measuring ranges supports solutions tailored to your application. An optional RangeLimit function lets you set lower and upper output limits on the transducers. The output can be inverted by the user. A connectable potentiometer enables zero-point adjustment of up to 5 % on the measuring section to compensate for sensor drift, for example. The VariTrans P 29000 itself requires no manual zero-point adjustment.
The broad-range power supply for all common supply voltages from 20 to 253 V AC/DC offers maximum flexibility. To make setting the required input and output range simple and user friendly, we offer a free software tool called VariSoft to support the user. VariSoft shows you the correct DIP switch position when you enter the required input and output ranges and it has an integrated print option for easy documentation. A wide variety of measurement signals must be reliably galvanically isolated and converted into standardized signals. This applies to any input signals from ±20 mV to ±200 V and from ±0.1 mA to ±100 mA.
The IsoPower A 20900 power supply provides a 24 V DC output voltage via two terminal pairs. Additional DIN rail bus connector contacts are located on the rear. When the IsoPower power supply is snapped onto the DIN rail, the DIN rail bus is automatically supplied with 24 V. The IsoPower A 20900 is equipped with a broad-range power supply. A floating signal contact indicates if the output voltage is out of range by more than 10 %.
The VariTrans A 20300 can also be used when a particularly high output load is required. Standard signal sources can often drive a load of up to 500 ohms, i.e., supply 10 V at 20 mA. Sometimes certain devices – e.g., actuators – require a higher voltage; i.e., their input resistance is higher. The signal doubler can also solve this problem: Both output signals are not used separately in this case, but are connected in series to form one signal. This doubles the available voltage, making it possible to drive a higher load of up to 1000 ohms (20 V at 20 mA). Of course, the signal-defining 0/4 to 20 mA current is retained in the series configuration.
The universal ThermoTrans P 32100 temperature transmitters provide connection possibilities for all common thermocouples and resistance thermometers. They can be flexibly adapted to the respective measuring task using DIP and rotary encoder switches or via an IrDA interface. Input voltage signals up to ±1000 mV are converted into standard 0/4 to 20 mA or 0 to 10 V signals. This enables the low-cost implementation of current measurements using shunt resistors, for example. Special measuring tasks can be solved with ThermoTrans devices which Knick configures according to individual specifications. Fixed-range devices without switch are used, for example, when manipulations or mix-ups must be precluded.
The flexible ThermoTrans A 20210 temperature transmitters provide connection possibilities for most of the common thermocouples and resistance thermometers. They can be flexibly adapted to the respective measuring task using DIP and rotary encoder switches. 3-port isolation with protective separation up to 300 V AC/DC according to EN 61140 ensures optimum protection of personnel and equipment as well as unaltered transmission of measuring signals. The ThermoTrans A 20210 offer maximum performance in the smallest of spaces. Resistance thermometers can be operated in 2-, 3- or 4-wire configuration. The connection configuration is automatically recognized, adjustment is not required. Thermocouples can be detected with internal or external reference junction compensation.
Thermocouples have very low resistance, making them interference-resistant. Their preferred field of application is high temperature ranges, for example, for measurements in ovens, smelting plants, and plastic machines. The range of standard thermocouples is extremely broad. The Thermo- Trans 210/211 transmitters therefore provide connection possibilities for all common thermocouples. To avoid long compensation lines, an external reference junction can be used in addition to the internal one. For reference junctions with thermostat, the reference temperature can be a fixed setting or measured with a Pt100.
The universal SensoTrans DMS A 20220 strain gauge transmitters provide connection possibilities for all standard strain gauge force transducers and strain gauge load cells in full-bridge configuration. They can be flexibly adapted to the respective measuring task using DIP and rotary encoder switches or via a “teach-in function“. 3-port isolation with protective separation up to 300 V AC/DC according to EN 61140 ensures optimum protection of personnel and equipment as well as unaltered transmission of measuring signals. The SensoTrans DMS A 20220 offers maximum performance in the smallest of spaces. Adjusting the zero point and sensitivity to the individual strain gauge sensor is particularly convenient using the “teach-in function“ – just at the push of a button at the device front. Sensors with known characteristics can be very easily calibrated using four rotary encoder switches and eight DIP switches.
When temperatures are to be measured using Pt100 resistance thermometers in high-voltage environments, standard temperature transmitters are often unsuitable due to their insufficient insulation. Resistance thermometers can be insulated against high voltage. In practice, however, the available installation space is often too small. Moreover, the insulation is weakened by thermal and mechanical aging. For temperature measurement on power electronics components, maximum safety is therefore provided by high-voltage resistant galvanic isolation from the Pt100 resistance thermometer. A typical application is the monitoring of the winding temperature of electric motors, generators or transformers.
In many fields of industry the positions of actuators or setpoint devices, for example, must be measured accurately. In many cases, they are used as a reference input for controllers or monitoring systems, safety shutdown systems, or for similar critical tasks. As a rule, high demands are placed on accuracy, flexibility, and functional safety as well as electrical safety. Rotary motion can be measured with potentiometers configured as angle sensors, translational motion with linear potentiometers as path sensors. These and other sensors provide a raw signal which is prepared, scaled, and converted into a standard signal for further processing using a resistance transmitter.
The VariTrans P 42000 are available for any input voltages from ±100 V to ±3600 V. Unipolar and bipolar (standard) signals are available at the output: ±20 mA, ±10 V, and 4 … 20 mA. 16 input/output signal combinations can easily be selected with a rotary encoder switch on the front of the device. There is no need for a complicated on-site adjustment with a screwdriver, calibrator, and multimeter. Drift problems due to unstable trimming components – e.g., potentiometers – are avoided. Thanks to the easy scalability of the range selection, the devices can easily be customized to individual customer solutions. Up to 16 customized signal combinations can be implemented in one device and configured optimally for the respective application.
ThermoTrans 205/206 for Resistance Thermometers Resistance thermometers are highly accurate temperature sensors with long-term stability for measuring temperatures up to max. 850 °C. They are mainly used to measure low and medium temperatures, for example in the air-conditioning, process engineering, and food industries. The ThermoTrans 205/206 transmitters allow for connection of all common resistance thermometers either in 2-, 3-, or 4-wire configuration. The ability to connect resistance transducers and potentiometers creates a wide range of application possibilities, for example, in the field of displacement or position detection. Converting the input signal into a proportional current/voltage signal enables simple further processing.
Electric as well as diesel-electric locomotives and multiple units (EMU/ DEMU) require multifold monitoring and control of electric energy. Voltage and current sensors used for this purpose need to meet the special demands posed by railway operations. Of particular concern are are and smoke protection, electrical safety, as well as robustness towards extreme environmental conditions, mechanical stress and EMI infuences.
The VariTrans P 43000 are available for any input currents from ±100 mA to ±5 A. Unipolar and bipolar (standard) signals are available at the output: ±20 mA, ±10 V, and 4 … 20 mA. 16 input/output signal combinations can easily be selected with a rotary encoder switch on the front of the device. There is no need for a complicated on-site adjustment with a screwdriver, calibrator, and multimeter. Drift problems due to unstable trimming components – e.g., potentiometers – are avoided. Thanks to the easy scalability of the range selection, the devices can easily be customized to individual customer solutions. Up to 16 customized signal combinations can be implemented in one device and configured optimally for the respective application.
The passive WG 25 repeater power supply is loop-powered. It is used for galvanic hazardous-area separation of a 2-wire supply line and transmits both 4 ... 20 mA and HART signals in both directions. With a voltage drop of just 4.2 V, the WG 25 uses the supply optimally so that all common 2-wire transmitters can be connected. Multi-channel systems, for example, require only one central, safe-area power supply that does not even need protective separation.
The VariTrans P 42000 TRMS are available for any input voltages from 10 V AC to 3600 V AC. Analog DC signals are available at the output: 0...20 mA, 0...10 V, and 4 ... 20 mA. The true RMS conversion is performed with high precision up to a crest factor of 5. It operates over a frequency range of 16.7 Hz to 1000 Hz. 16 input/output signal combinations can easily be selected with a rotary encoder switch on the front of the device. There is no need for a complicated on-site adjustment with a screwdriver, calibrator, and multimeter. Drift problems due to unstable trimming components – e.g., potentiometers – are avoided. Thanks to the easy scalability of the range selection, the devices can easily be customized to individual customer solutions. Up to 16 customized signal combinations can be implemented in one device and configured optimally for the respective application.
3-port isolation with protective separation up to 300 V AC/DC according to EN 61140 ensures optimum protection of personnel and equipment as well as unaltered transmission of measuring signals. The SensoTrans DMS P 32200 offer maximum performance in the smallest of spaces. Adjusting the zero point and sensitivity to the individual strain gauge sensor is particularly convenient via the infrared port, for example using a PDA. Sensors with known characteristics can be very easily calibrated using four rotary encoder switches and eight DIP switches.
The universal SensoTrans R A 20230 resistance transmitters provide connection possibilities for all standard potentiometers for angle, path or position detection up to 50 kohms. They can be flexibly adapted to the respective measuring task using DIP and rotary encoder switches or via a “teach-in function“. 3-port isolation with protective separation up to 300 V AC/DC according to EN 61140 ensures optimum protection of personnel and equipment as well as unaltered transmission of measuring signals. The SensoTrans R A 20230 offer maximum performance in the smallest of spaces
The IsoTrans 36 and 37 isolators are not only suitable as highly reliable isolators for normal applications, they also meet the most stringent requirements that can be set for electrical isolation. There is no need for power supply wiring. Voltages in the range from 250 to 1200 V DC can be converted into current signals up to 5 mA using a special loop-powered version of this isolator. As an example, this allows for easy checking of the contact wire voltage. Please contact us if you need detailed information on this special model.
Knick achieves a significant increase in reliability and lifetime by developing signal conditioners with extremely low power consumption and self-heating. This leads to a significant increase in the reliability and service life of the electronic components – for example, the MTBF (mean time between failures) of the new VariTrans A 21000 signal conditioners is 280 years. Thanks to the VariPower power supply for all common supply voltages from 24 to 110 V DC (± 25 %) and 110 to 230 V AC (± 10 %), the devices can be used internationally with virtually all supply voltages.
Knick provides a tailor-made solution. Thanks to the calibrated selection of the input and output parameters using DIP switches, VariTrans A 26000 universal signal conditioners can be used without complicated readjustment. The broad-range power supply for all common supply voltages from 20 to 253 V AC/DC offers maximum flexibility. At a width of just 12.5 mm, the modular housing with pluggable screw terminals allows for simple and fast assembly and pre-wiring of enclosures. Housings with fixed screw terminals are also available for extremely high mechanical loads. The easy-to-open housing allows for simple configuration of the input and output ranges and provides good protection against contact and unintentional adjustment.
The devices work with a serial chopper generator in the current path. This avoids the accuracy-reducing current losses of normal parallel connected generators, considerably reduces the voltage drop, and ensures accurate transmission of even the lowest currents.
The VariTrans P 15000 signal conditioners feature excellent transmission quality combined with calibrated standard signal switching using DIP switches and a broad-range power supply. Long transmission paths can cause potential differences that lead to errors in the measuring result. Different products were also required for different signals and supply voltages. A microcontroller monitors the control element settings and controls the calibrated range selection. Interference with the signal transmission – due to contact resistance in the range switch, for example – is ruled out in this manner.
from Knick are the advanced series loop-powered isolators IsoTrans A 20400. Thanks to an extremely high packing density of up to 320 channels per meter of mounting rail and outstanding technical properties such as protective separation, these isolators leave the competition in the dust —even when it comes to the price-performance ratio! The ultra-slim 6 mm wide modular housing for one or two channels allows for simple and fast installation.
Knick is the first manufacturer to provide a repeater power supply for 2-wire transmitters in an extremely compact 6-mm housing - the IsoAmp PWR A 20100. It supplies the transmitter with power and transmits the measurement signal to the output with galvanic isolation and high accuracy. In case a signal other than the 4 to 20 mA current loop signal is required, the repeater power supply provides various output signals which can be selected via DIP switches. Of course, HART signals are transmitted unaltered. The width of just 6 mm also allows for the use of the repeater power supply in the tightest of spaces.
The PolyTrans P 32000 universal transmitters provide connection possibilities for all standard thermocouples, resistance thermometers, strain gauge full bridges, resistors and potentiometers/resistive sensors. They can be flexibly adapted to the respective measuring task using DIP and rotary encoder switches or via an IrDA interface. 3-port isolation with protective separation up to 300 V AC/ DC according to EN 61140 ensures optimum protection of personnel and equipment as well as unaltered transmission of measuring signals. The PolyTrans P 32000 offer maximum performance in the smallest of spaces. Resistance thermometers can be operated in 2-, 3- or 4-wire configuration. The connection configuration is automatically recognized, adjustment is not required. All commercial thermocouples can be detected with internal or external reference junction compensation.
For the majority of the resistor units manufactured by Schniewindt, the design is based on CSN® Resistor Webs. For manufacturing the resistor webs, resistive wires are woven meander shaped into temperature resistant insulation yarn. Besides the excellent high voltage strength and the type-dependent low inductivity of the resistor webs, these webs are additionally suitable for high specific load operation due to the excellent convection conditions of the resistor web design. By selecting special high-grade resistive alloys for the manufacturing of the resistor webs, resistor units for operation under almost any environmental condition can be developed.
CSN® Pre-Insertion Resistors are used for the limitation of transients during the energization process of transformers and HVDC VSC converter applications. CSN® Discharge Resistors are used for the discharge of capacitors, reactors, and superconducting magnetic field coils. They are characterized by a high dielectric strength and energy absorption capacity.
For the majority of the CSN® Filter- and Damping Resistors the design is based on CSN® Resistor Webs. The resistor units provide operation at high continuous power, excellence voltage strength and low inductivity while needing only little space. CSN® Filter Resistors are used in HVDC applications as well as in reactive power compensation applications (like SVC, MSCDN, STATCOM) all over the world and have proven their reliability – even under harsh environmental conditions – for long time periods. CSN® Damping Resistors are most often used for building-up RC-circuits in industrial plants as well as for damping of magnetic cores and reactors.
CSN® Neutral Earthing Resistors are used in power distribution systems for star point earthing of the transformer or generator windings. According to the application (low or high ohmic neutral earthing type), packages made out of meander shaped stainless steel wire elements or CSN® Resistor Webs will be used as the active material. Schniewindt has already supplied units for system voltages up to 380 kV and earth fault currents up to 70 kA.
CSN® Load- Testing- and Special Resistors are used:
CSN® Braking Resistors are used for controlled braking of every kind of electrical drives. Braking resistors convert the energy of drives into thermal energy which will be dissipated into the corresponding cooling medium. Design variations with natural or forced air cooling are available. CSN® Braking Resistors can be delivered with an indirect water cooling system using an air-water heat exchanger as well. The design of the CSN® Braking Resistors is particularly suitable for use in maritime applications. Schniewindt, as a global market leader in this resistor sector, has a wealth of experience in the design according to the technical guidelines and rules of international classification societies.
Insulator Heaters are used in flue gas cleaning systems for preheating the insulators and as protection of the equipment against condensation and freezing during shutdown periods.
Dummy Load Resistors used as dummy loads for testing high-frequency radio transmitter systems. Schniewindt had already supplied dummy load resistors with rated max. cont. power up to 1500 kW.
Protection Resistors are used for protection of electric equipment in case of short-term peak currents. Due to the high capacity of energy absorption, CSN® Protection Resistors can absorb several kiloamperes for a limited period of time, protecting connected modules.
Axis air flow monitor provides reliable source to monitor positive or negative air flow of compact fans or filter fans. Proper installation and connection with an optical LED or low audible signal device, a bi-direction air flow monitor will activate – deactivate an electrical contact if the air flow of the fan falls below 0.8 m/s , thus either turning the signalling device on or of
Recommended Use:
Normally used to turn an alarm or signalling device On to indicate loss of air flow
Axis LED is suitable for all types of Enclosures and Panels, it has a very long life and available in 3W, 5W, 6W and 10W. Our LED comes with 50Hz and 60Hz with CE approval(on request).
The compact CS 032 high-performance fan heater prevents the formation of condensation and provides an evenly distributed interior air temperature in enclosures. The plastic housing provides protection against contact with current-carrying components via double insulation (protection class II). The fan heater is also available with an optional fixed-point thermostat as the CSF 032. These series were designed to accommodate DIN rail or screw mounting.
The compact CS 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an optional integrated thermostat for temperature control. The CS 130 was designed as a stationary unit for panel or DIN rail mounting. For foot mounting on the bottom of an enclosure, the CS 030 fan heater is recommended
The compact high-performance fan heater prevents the formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The heater may only be operated together with a fan, but is also available without an axial fan (for self-installation). The fan heaters are available with two different mounting systems – either mounting by screws or with a new and unique twist clip mounting system. These options allow for quick and easy installation of the fan heater.
The CSK 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design.
The CS 028 / CSL 028 fan heaters prevent the formation of condensation and provide an evenly distributed interior air temperature in enclosures. The heaters are connected using the internal terminal connectors. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. The small size of the CS 028 / CSL 028 heaters makes them ideal for use in enclosures where space is at a premium.
The compact high performance fan heater DCR 030 prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The fan heater is available with an integrated electronic thermostat or integrated electronic hygrostat. The model with thermostat is available with internal or external sensor. The fan heater with integrated hygrostat is equipped with an external sensor. The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity. The DCR 030 was designed as a stationary unit for the bottom of the enclosure. For wall fixing the fan heater DCR 130 is recommended.
The compact HGL 046 fan heater prevents the formation of condensation. The integrated high-performance axial fan provides forced air circulation and so guarantees an even temperature in enclosures. The heater is wired using the internal terminal connectors.
The compact high-performance fan heater prevents the formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The heater may only be operated together with a fan, but is also available without an axial fan (for self-installation). The fan heaters are available with two different mounting systems – either mounting by screws or with a new and unique twist clip mounting system. These options allow for quick and easy installation of the fan heater.
The semiconductor CR 027 fan heater prevents the formation of condensation and ensures an even temperature in enclosures. The integrated thermostat is used to set the desired temperature while the high performance axial fan provides forced air circulation. The CR 027 is also available with a continuously running fan (when powered).
The compact CR 030 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an integrated thermostat for temperature control or a pre-set hygrostat for humidity control. The CR 030 was designed as a stationary unit for the bottom of the enclosure. For panel or DIN rail mount, the CR 130 fan heater is recommended.
The RCE 016 small heaters have been designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.
Compact convection heater of temperature class T3 (392 °F / 200 °C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.
Compact convection heater of temperature class T3 (392 °F / 200 °C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.
The compact CS 030 high-performance fan heater prevents the formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an optional integrated thermostat for temperature control. The CS 030 was designed as a stationary unit for the bottom of the enclosure. For panel or DIN rail mount, the CS 130 fan heater is recommended.
Compact convection heater of temperature class T3 (392 °F / 200 °C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.
The Flat Heater CP 061 is used to provide evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications in which standard enclosure heaters are often too big. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers Thermo conductive contact to a component or a cabinet wall. Additionally, a mounting system specially designed for the CP 061 allows for the compensation of an expansion of the heater body as a result of the heating-up when in operation. Operated as a convection heater, the slim heater CP 061 warms up the ambient air within a cabinet. The CP 061 is designed for continuous operation.
The compact CR 130 high-performance fan heater prevents the formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an integrated thermostat for temperature control or a pre-set hygrostat for humidity control. The CR 130 was designed as a stationary unit for panel or DIN rail mounting. For foot mounting on the bottom of an enclosure, the CR 030 fan heater is recommended.
The compact high-performance fan heater DCR 130 prevents the formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The fan heater is available with an integrated electronic thermostat or electronic hygrostat. The model with the thermostat is available with an internal or external sensor. The fan heater with integrated hygrostat is equipped with an external sensor. The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity. The DCR 130 was designed for wall fixing. For fixing on the bottom of the enclosure the fan heater DCR 030 is recommended.
The CSF 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. This model with a plug-in thermostat does not require additional wiring. The CSF 060 is also available in a version without a thermostat (CS 060).
The HGK 047 heaters are used in enclosures to maintain minimum operating temperatures and to help prevent the failure of electronic components caused by condensation and corrosion.
The RC 016 small heaters are designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.
The CS 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. The CS 060 is also available in a version with a plug-in thermostat requiring no additional wiring (CSF 060).
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value. The aluminum profile heater body design has a chimney effect to distribute heat evenly. The cage clamp connectors save time and simplify installation.
The CSF 028 fan heater prevents the formation of condensation and provides evenly distributed interior air temperature in enclosures. The touch-safe plastic housing and the small size makes it ideal for use in enclosures with a high packing density. The heater is equipped with a fixed set point thermostat and is easily wired via external pressure clamps. Two different mounting options are available – DIN rail or screw tabs. The robust screw tab mounting is particularly suitable for applications with high vibration.
The LED 025 light series is suitable for all types of panels and enclosures, especially where space is at a premium. These lights have a very long service life due to the use of LED technology. They are available with powerful non-slip rubberized magnets allowing them to be easily positioned in any steel enclosure. Screw and clip mounting are also available as options. The Ecoline series is a simplified version of the standard LED 025 light and has a dual cage clamp for connection instead of connectors. Nonetheless, it is suitable for daisy-chaining and allows for up to 10 lights to be connected to each other.
The LED 121/122 Varioline is a powerful and compact LED lamp with an integrated socket for use in enclosures. Featuring socket standards of many European countries as well as the US and Australia, it allows for the power connection of laptops and diagnostic devices. Its LED tube emits more than 1,000/1,700 Lm thereby illuminating even very large enclosures in their full depth and height. The glare-free, 120° rotatable light tube uses Mid-power LEDs with a service life of 60,000 h.
The LED 025 light series is suitable for all types of panels and enclosures, especially where space is at a premium. These lights have a very long service life due to the use of LED technology. They are available with powerful non-slip rubberized magnets allowing them to be easily positioned in any steel enclosure. Screw mounting is also available as an option. The power output allows up to 10 lights to be connected to each other (daisy chain) with both the input and output plugs snap-locking into place.
The LED 021/022 Varioline is a powerful and compact LED lamp for use in enclosures. Its LED tube emits more than 1,000/1,700 Lm at only 11 W/16 W power consumption, thereby illuminating even very large enclosures in their full depth and height. The glare-free, 360° rotatable LED tube uses Mid-power LEDs with a service life of 60,000 h. The emitted daylight color of 6,500 K provides safety for the user by a natural and non-fading color reproduction.
The compact KL 025 light was designed for use in industrial enclosures and control cabinets. A strong magnet allows simple and quick installation and flexibility for various mounting positions. The light also features an optional integrated receptacle so that electrical devices can easily be plugged in when needed.
The compact KL 025 light was designed for use in industrial enclosures and control cabinets. A strong magnet allows simple and quick installation and flexibility for various mounting positions. The light also features an optional integrated receptacle so that electrical devices can easily be plugged in when needed.
Compact high performance fan tray for enforced circulation of air in switch and server enclosures and for concerted cooling of 19" component groups. Natural convection is improved and the formation of localised hot pockets is avoided. Also available with integrated thermostat.
Filter fans are used to provide "cooling" by forced air-circulation in enclosures and cabinets containing electrical/ electronic and other components. The interior temperature of an enclosure can be reduced by channeling cooler, filtered outside air into the enclosure, thus expelling hot inside air. The resulting airflow prevents the formation of localized hot pockets and protects electronic components from overheating. The Filter Fan Plus series encompasses a new air-flap technology on the air outlet side, thereby reaching an unparalleled high degree of airflow. A unique ratchet mechanism is used for easy installation. It provides safe and secure mounting while guaranteeing a tight seal. Depending on the requirements, there are two optional systems available – the FPI or the FPO system (FPI = "in", FPO = "out"). The FPI system is the more commonly known installation system, where a filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure (airflow direction "In"). This system consists of a filter fan and an exhaust filter. On the opposite, with the newer FPO system, the filter fan will be located in the upper area of the enclosure to draw warmer air out of the enclosure (airflow direction "Out"). The FPO system consists of an intake filter and exhaust filter fan. The Filter Fan Plus series has been designed for indoor use.
Filter fans are used to provide "cooling" by forced air-circulation in enclosures and cabinets containing electrical/ electronic and other components. The interior temperature of an enclosure can be reduced by channeling cooler, filtered outside air into the enclosure, thus expelling hot inside air. The resulting airflow prevents the formation of localized hot pockets and protects electronic components from overheating. The Filter Fan Plus series encompasses a new air-flap technology on the air outlet side, thereby reaching an unparalleled high degree of airflow. A unique ratchet mechanism is used for easy installation. It provides safe and secure mounting while guaranteeing a tight seal. Depending on the requirements, there are two optional systems available – the FPI or the FPO system (FPI = "in", FPO = "out"). The FPI system is the more commonly known installation system, where a filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure (airflow direction "In"). This system consists of a filter fan and an exhaust filter. On the opposite, with the newer FPO system, the filter fan will be located in the upper area of the enclosure to draw warmer air out of the enclosure (airflow direction "Out"). The FPO system consists of an intake filter and exhaust filter fan. The Filter Fan Plus series has been designed for indoor use.
Filter fans are used to provide "cooling" by forced air-circulation in enclosures and cabinets containing electrical/ electronic and other components. The interior temperature of an enclosure can be reduced by channeling cooler, filtered outside air into the enclosure, thus expelling hot inside air. The resulting airflow prevents the formation of localized hot pockets and protects electronic components from overheating. The Filter Fan Plus series encompasses a new air-flap technology on the air outlet side, thereby reaching an unparalleled high degree of airflow. A unique ratchet mechanism is used for easy installation. It provides safe and secure mounting while guaranteeing a tight seal. Depending on the requirements, there are two optional systems available – the FPI or the FPO system (FPI = "in", FPO = "out"). The FPI system is the more commonly known installation system, where a filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure (airflow direction "In"). This system consists of a filter fan and an exhaust filter. On the opposite, with the newer FPO system, the filter fan will be located in the upper area of the enclosure to draw warmer air out of the enclosure (airflow direction "Out"). The FPO system consists of an intake filter and exhaust filter fan. The Filter Fan Plus series has been designed for indoor use.
Filter fans are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents the formation of localized heat pockets and protects the electronic components from overheating. Four integrated axial fans provide a particularly high and uniform air circulation which contributes to higher reliability. The plastic used for the hood of this filter fan series is UV light-resistant. These filter fans are intended for indoor use.
Filter fans are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents the formation of localized heat pockets and protects the electronic components from overheating. The plastic used for the hood of this filter fan series is impact and UV light-resistant. These filter fans are intended for indoor use.
Filter fans are used to provide "cooling" by forced air-circulation in enclosures and cabinets containing electrical/ electronic and other components. The interior temperature of an enclosure can be reduced by channeling cooler, filtered outside air into the enclosure, thus expelling hot inside air. The resulting airflow prevents the formation of localized hot pockets and protects electronic components from overheating. The Filter Fan Plus series encompasses a new air-flap technology on the air outlet side, thereby reaching an unparalleled high degree of airflow. A unique ratchet mechanism is used for easy installation. It provides safe and secure mounting while guaranteeing a tight seal. Depending on the requirements, there are two optional systems available – the FPI or the FPO system (FPI = "in", FPO = "out"). The FPI system is the more commonly known installation system, where a filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure (airflow direction "In"). This system consists of a filter fan and an exhaust filter. On the opposite, with the newer FPO system, the filter fan will be located in the upper area of the enclosure to draw warmer air out of the enclosure (airflow direction "Out"). The FPO system consists of an intake filter and exhaust filter fan. The Filter Fan Plus series has been designed for indoor use.
Roof filter fans and roof exhaust filters are used in enclosures from which warm air must be diverted due to increased heat development. The ready-to-connect and low-noise roof filter fan is used to expel warm air from within the enclosure. Alternatively, the roof exhaust filter provides passive ventilation. The RFP 018 series come in two versions: one utilizes four small axial fans, improving reliability and maintaining continuous operations even if one of the fans should fail; the second uses a larger single high capacity fan.
Filter fans are used to provide "cooling" by forced air-circulation in enclosures and cabinets containing electrical/ electronic and other components. The interior temperature of an enclosure can be reduced by channeling cooler, filtered outside air into the enclosure, thus expelling hot inside air. The resulting airflow prevents the formation of localized hot pockets and protects electronic components from overheating. The Filter Fan Plus series encompasses a new air-flap technology on the air outlet side, thereby reaching an unparalleled high degree of airflow. A unique ratchet mechanism is used for easy installation. It provides safe and secure mounting while guaranteeing a tight seal. Depending on the requirements, there are two optional systems available – the FPI or the FPO system (FPI = "in", FPO = "out"). The FPI system is the more commonly known installation system, where a filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure (airflow direction "In"). This system consists of a filter fan and an exhaust filter. On the opposite, with the newer FPO system, the filter fan will be located in the upper area of the enclosure to draw warmer air out of the enclosure (airflow direction "Out"). The FPO system consists of an intake filter and exhaust filter fan. The Filter Fan Plus series has been designed for indoor use.
Filter fans are used to provide "cooling" by forced air-circulation in enclosures and cabinets containing electrical/ electronic and other components. The interior temperature of an enclosure can be reduced by channeling cooler, filtered outside air into the enclosure, thus expelling hot inside air. The resulting airflow prevents the formation of localized hot pockets and protects electronic components from overheating. The Filter Fan Plus series encompasses a new air-flap technology on the air outlet side, thereby reaching an unparalleled high degree of airflow. A unique ratchet mechanism is used for easy installation. It provides safe and secure mounting while guaranteeing a tight seal. Depending on the requirements, there are two optional systems available – the FPI or the FPO system (FPI = "in", FPO = "out"). The FPI system is the more commonly known installation system, where a filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure (airflow direction "In"). This system consists of a filter fan and an exhaust filter. On the opposite, with the newer FPO system, the filter fan will be located in the upper area of the enclosure to draw warmer air out of the enclosure (airflow direction "Out"). The FPO system consists of an intake filter and exhaust filter fan. The Filter Fan Plus series has been designed for indoor use.
Filter fans are used to provide "cooling" by forced air-circulation in enclosures and cabinets containing electrical/ electronic and other components. The interior temperature of an enclosure can be reduced by channeling cooler, filtered outside air into the enclosure, thus expelling hot inside air. The resulting airflow prevents the formation of localized hot pockets and protects electronic components from overheating. The Filter Fan Plus series encompasses a new air-flap technology on the air outlet side, thereby reaching an unparalleled high degree of airflow. A unique ratchet mechanism is used for easy installation. It provides safe and secure mounting while guaranteeing a tight seal. Depending on the requirements, there are two optional systems available – the FPI or the FPO system (FPI = "in", FPO = "out"). The FPI system is the more commonly known installation system, where a filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure (airflow direction "In"). This system consists of a filter fan and an exhaust filter. On the opposite, with the newer FPO system, the filter fan will be located in the upper area of the enclosure to draw warmer air out of the enclosure (airflow direction "Out"). The FPO system consists of an intake filter and exhaust filter fan. The Filter Fan Plus series has been designed for indoor use.
Filter fans are used to provide "cooling" by forced air-circulation in enclosures and cabinets containing electrical/ electronic and other components. The interior temperature of an enclosure can be reduced by channeling cooler, filtered outside air into the enclosure, thus expelling hot inside air. The resulting airflow prevents the formation of localized hot pockets and protects electronic components from overheating. The Filter Fan Plus series encompasses a new air-flap technology on the air outlet side, thereby reaching an unparalleled high degree of airflow. A unique ratchet mechanism is used for easy installation. It provides safe and secure mounting while guaranteeing a tight seal. Depending on the requirements, there are two optional systems available – the FPI or the FPO system (FPI = "in", FPO = "out"). The FPI system is the more commonly known installation system, where a filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure (airflow direction "In"). This system consists of a filter fan and an exhaust filter. On the opposite, with the newer FPO system, the filter fan will be located in the upper area of the enclosure to draw warmer air out of the enclosure (airflow direction "Out"). The FPO system consists of an intake filter and exhaust filter fan. The Filter Fan Plus series has been designed for indoor use.
The STEGOJET is a compact, powerful built-in fan. It allows precise cooling of heat sources and the airflow prevents the formation of heat pockets. Its design offers a maximum rotation range with an air output in almost any direction. The dual clip system (two clips at a 90° angle) allows four different positions on a DIN rail, while the hinge in the housing can be moved at a 40° angle. Additionally, the airflow at the air outlet can be directed at a 45° angle and the air duct can be turned 360°.
Filter fans are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating. The plastic used for the hood of this filter fan series is impact and UV light resistant. These filter fans are intended for indoor use.
The hose-proof hood is designed to increase the protection class and serves as a protective cover for filter fans, intake and exit filters, e.g. for the series FPI 018, FPO 018 and FF 018. It is used for protection against water projected by a hose and extreme climatic influences if located outdoors or in industrial applications with harsh environmental conditions. In order to clean the filter fans or to change the filter mat, the hood can easily be removed, the cabinet does not need to be opened (safety risk).
This filter fan can be used in outdoor enclosures where warm air has to be dissipated. To clean and exchange the filter mat, it is only necessary to open the lockable door of the outdoor hood eliminating the need to allow interior access to the enclosure. A protection type of IP55 is achieved due to the special design of the hood and the use of fine filter mats. The plastic used for the hood of this filter fan is highly weather and UV light resistant.
Filter fans are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents the formation of localized heat pockets and protects the electronic components from overheating. The plastic used for the hood of this filter fan series is UV light-resistant. These filter fans are intended for indoor use.
Split cable entry system for routing cables with connectors, providing an IP54 / up to UL type 12 rating. Routing, sealing and providing strain relief for cable diameters from 1 to 35 mm. The new cable entry system is easy to install. Cable grommets are placed into compartments in the frame and are securely fixed to the frame during assembly. The KEL-U 10 is the same size as a standard 10 pin industrial connector. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. All frame systems come with a rubber gasket.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CANopen/Modbus - CANopen/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40°C to +105°C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CANopen/Modbus - CANopen/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40°C to +105°C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CANopen/Modbus - CANopen/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40°C to +105°C, features required by AUTOMOTIVE applications.
The HD67113 is a fully transparent RS232 / RS485 Converter that allows you to interface a RS232 network with a RS485 network. Easy to get the message across the data flow control by microprocessor.
The HD67251 is a NMEA2000 / DeviceNet Converter and it allows you to connect a NMEA2000 network with a DeviceNet net, in order to exchange the informations between the networks.
The HD67118 is a fully transparent RS232 / RS485 Converter that allows you to interface a RS232 network with a RS485 network.
Easy to get the message across the data flow control by microprocessor.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CANopen/Modbus - CANopen/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40°C to +105°C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The HD67153 is a CANopen/ DeviceNet Master Converter and it allows you to connect some DeviceNet slave with a CANopen network in order to exchange the informations between the networks.
It is a DeviceNet Slave / CANopen Converter and it allows you to connect a DeviceNet net (for example an Allen-Bradley PLC..) with a CANopen network in order to exchange the informations between the networks.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The HD67153 is a CANopen/ DeviceNet Master Converter and it allows you to connect some DeviceNet slave with a CANopen network in order to exchange the informations between the networks.
It is a DeviceNet Slave / CANopen Converter and it allows you to connect a DeviceNet net (for example an Allen-Bradley PLC..) with a CANopen network in order to exchange the informations between the networks.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CANopen/Modbus - CANopen/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40°C to +105°C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This serie of products allows to integrate a CAN network ( CAN2.0A, CAN2.0B, CANopen, J1939, NMEA2000, DeviceNet ) with a RS232 or Ethernet or USB net. The HD67290 is a CAN / RS232 Converter and it allows you to connect a CAN network with a RS232 network. The HD67390-E-A1 is a CAN / Ethernet Converter and it allows you to connect a CAN network with an Ethernet network. The HD67390-U-D1 is a CAN / USB Converter and it allows you to connect a CAN network with an USB network.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CANopen/Modbus - CANopen/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40°C to +105°C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This serie of products allows to integrate a CAN network with a Modbus TCP net. The HD67514 is a CAN / Modbus TCP Master Converter and it allows you to connect some Modbus TCP Slaves with an existing CAN network. The HD67514 is a CAN / Modbus TCP Slave Converter and it allows you to connect a CAN network with a Modbus TCP Master (for example a PLC, SCADA...) in order to exchange the informations between the networks.
This serie of products allows to integrate a CAN network with an Ethernet net. On Ethernet side, it is possible to use Modbus TCP protocol or generic Ethernet communication. It is a CAN / Ethernet Converter and it allows you to connect some CAN devices with an Ethernet net (for example a PC, Supervisory System...) in order to exchange the informations between the networks.
This series of products allows to integrate a CAN network with another CAN net. The Gateway HD67221 allows to separate the CAN in different CAN branches. These devices allow to filter the CAN frames between two CAN branches. These devices permit to change the CAN frame identifier from a branch to the other.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The ranges includes various products for solving all the needs of a CAN line like extension of the line, increase of nodes number, isolation of CANopen branches, protection from spikes noise and electrostatic charger or simply to change the communication baudrate. The HD67117 and HD67117M devices are repeaters/isolators for CANopen buses.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE application
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The ranges includes various products for solving all the needs of a CAN line like extension of the line, increase of nodes number, isolation of CANopen branches, protection from spikes noise and electrostatic charger or simply to change the communication baudrate. The HD67117 and HD67117M devices are repeaters/isolators for CANopen buses.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The ranges includes various products for solving all the needs of a CAN line like extension of the line, increase of nodes number, isolation of CANopen branches, protection from spikes noise and electrostatic charger or simply to change the communication baudrate. The HD67117 and HD67117M devices are repeaters/isolators for CANopen buses.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
We supply the best industrial remote access solutions to aid the modern workforce in various sectors. The secure and continuous connectivity in your industrial operations becomes easy and fast with our services. Contact us today to know how our industrial access solutions can help your industrial operations.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
These Optic Fiber devices are designed to extend the RS485 or/and RS232 using the optic fibers.These devices are independent from the serial protocol and they are adapted for Modbus, Modbus+ and IEC131.The HD67033M and the HD67035M are devices that allow to extend a RS232 or RS485 network through Multi-Modal optic fiber, up to 2 km.The possible connection typologies are Point-To-Point and the Single Loop.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
The HD67153 is a CANopen/ DeviceNet Master Converter and it allows you to connect some DeviceNet slave with a CANopen network in order to exchange the informations between the networks. It is a DeviceNet Slave / CANopen Converter and it allows you to connect a DeviceNet net (for example an Allen-Bradley PLC..) with a CANopen network in order to exchange the informations between the networks.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
The HD67020 and HD670021 are M-Bus / RS232 - Converter (transparent converter). This series allow to read/write M-Bus Slaves devices by RS232, ensuring galvanic isolation between M-Bus and RS232. HD67020 are Plug&Play devices and they allow to connect up to 10 M-Bus Slaves to RS232. HD67021 are Configurable devices with Logic Inside and they allow to connect up to 250 M-Bus Slaves to RS232
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CANopen/Modbus - CANopen/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40°C to +105°C, features required by AUTOMOTIVE applications.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
High-speed worldwide VPN network
Machines automatically connect to the nearest IXON Cloud server. A
fast VPN connection no matter where you are in the world.
Always instantly online with 4G, Wi-Fi or Ethernet
Setting up a connection between machine and IXON Cloud is truly
Plug & Play with the seamlessly integrated Ixrouter.
Made for easy collaboration
Invite an unlimited number of users. Work simultaneously with your
colleagues in one platform, in a quick and secure manner. Includes
unlimited use of VPN features.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
IXrouter Connect your machine controls, HMI, robots and all other industrial devices in your machine to the LAN side of the IXrouter. As soon as the IXrouter has access to the internet, it registers itself on the IXON Cloud. Now you have instant access to all remote access and IoT features for fast service and advanced data analysis.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This serie of products allows to integrate a CANopen network with another CANopen net. This type of converters are employed in a particular way in the industrial automation. The CANopen protocol has also the function of PDO and SDO for the management of data and services, EMCY for the management of alarms. This device also performs the function of filtering a frame between two CANopen bus.
Winlog Pro is the most flexible, convenient easy to use software package for the SCADA HMI applications development with Web Server support. Highlights
At Axis Solutions Limited, we understand the need for effective, real-time monitoring and control in various industries. That's why we stand tall as reputable SCADA System suppliers, providing solutions that seamlessly integrate with your operations. Our SCADA Systems are designed to simplify complex processes, offering comprehensive control over your machinery and processes. They enable real-time data collection, efficient process management, and superior automation, enhancing productivity and reducing operational costs. With our SCADA systems, you gain a bird's-eye view of your entire operation, enabling swift decision-making and performance optimization. Choose Axis Solutions Limited, your reliable SCADA System suppliers, for unmatched control and enhanced operational efficiency. Embrace the future of industrial automation with Axis India.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The HD67020 and HD670021 are M-Bus / RS232 - Converter (transparent converter).This series allow to read/write M-Bus Slaves devices by RS232, ensuring galvanic isolation between M-Bus and RS232.HD67020 are Plug&Play devices and they allow to connect up to 10 M-Bus Slaves to RS232.HD67021 are Configurable devices with Logic Inside and they allow to connect up to 250 M-Bus Slaves to RS232.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
K107A is a amplifier for RS485 serial line. It’s used in order to extend both the length or the number of devices admitted (max 32) on RS485 serial line. Useful also when a star connection needed that usual is not possible with RS485 line.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
K109PT1000 is a converter for Thermoresistance PT1000 with 2,3,4 wires and provides a mA/V standard output signal. It’s completely configurable through dip switches. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
K112 isolation module has been designed to adapt specific on/off sensors to a standard NPN and/or PNP connection. It’s a useful solution to interface a proximity sensor with a plc. The two outputs (PNP and NPN) can be utilized simultaneously. A 2-way galvanic isolation among input // output circuits assures the integrity of your datas.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
S604 and S711 Series are instruments for the measurement and storage of electrical parameters. They are particularly suitable when a device for analysis and control is required consumption, with an excellent price/performance ratio. Rogowski current transducers versions offer extreme ease of connection and can be used in applications with high currents, linear measurements, retrofitting, energy audits etc. On request, the tools can communicate through the RS485 serial port with ModBUS RTU/ASCII protocol or via Ethernet port with ModBUS TCP-IP protocol. It also is supplied ENERGY POWER PACK software for remote management of the instrument. It’s available also a Web server interface for the management of the instrument from any PC connected to LAN/Internet network.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z113-1 is an alarm threshold with two relay output SPST from 3A 250V with a common contact. The module allows to select the input type via DIP-switch: voltage, current, potentiometer, thermocouple (TC), thermoresistance (RTD). Input, output, input filter, rejection and burn-out can be configured through Software (via front USB port),
Z-Line Series offers a full range of signal conditioners including analog/digital/serial converters, temperature transmitters, galvanic isolators, splitters, trip amplifiers and math modules. They work at 10-40 Vdc/ 19-28 Vac, 85-265 Vac/dc or are supplied by the loop. Z-Line modules ensure from 1.500 Vrms to 4.000 Vrms isolation voltage for 1 minute at three points. They also supply the transducer and can have active/passive input/output and they are designed to be mounted on DIN 46277 rail.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
S604 and S711 Series are instruments for the measurement and storage of electrical parameters. They are particularly suitable when a device for analysis and control is required consumption, with an excellent price/performance ratio. Rogowski current transducers versions offer extreme ease of connection and can be used in applications with high currents, linear measurements, retrofitting, energy audits etc. On request, the tools can communicate through the RS485 serial port with ModBUS RTU/ASCII protocol or via Ethernet port with ModBUS TCP-IP protocol. It also is supplied ENERGY POWER PACK software for remote management of the instrument. It’s available also a Web server interface for the management of the instrument from any PC connected to LAN/Internet network.
S604 and S711 Series are instruments for the measurement and storage of electrical parameters. They are particularly suitable when a device for analysis and control is required consumption, with an excellent price/performance ratio. Rogowski current transducers versions offer extreme ease of connection and can be used in applications with high currents, linear measurements, retrofitting, energy audits etc. On request, the tools can communicate through the RS485 serial port with ModBUS RTU/ASCII protocol or via Ethernet port with ModBUS TCP-IP protocol. It also is supplied ENERGY POWER PACK software for remote management of the instrument. It’s available also a Web server interface for the management of the instrument from any PC connected to LAN/Internet network.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate a CAN network ( CAN2.0A, CAN2.0B, CANopen, J1939, NMEA2000, DeviceNet ) with a RS232 or Ethernet or USB net.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CAN/Modbus - CAN/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CAN/Modbus - CAN/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
S604 and S711 Series are instruments for the measurement and storage of electrical parameters. They are particularly suitable when a device for analysis and control is required consumption, with an excellent price/performance ratio. Rogowski current transducers versions offer extreme ease of connection and can be used in applications with high currents, linear measurements, retrofitting, energy audits etc. On request, the tools can communicate through the RS485 serial port with ModBUS RTU/ASCII protocol or via Ethernet port with ModBUS TCP-IP protocol. It also is supplied ENERGY POWER PACK software for remote management of the instrument. It’s available also a Web server interface for the management of the instrument from any PC connected to LAN/Internet network.
High precision temperature transmitters for head mounting, T120 and T121, are designed for universal application on machines, plants, installations and in process industry. They convert the input signals and retransmit them into a normalized signal in current through a 4-20 milliAmpère loop. Input signals can come from 2, 3, 4-wire RTD sensors such as Pt100 (EN 60751) and Ni100 (DIN 43760). The T121 model also acquires Pt500, Pt1000, and thermocouple signals from J, K, R, S, T, B, E, N type (EN 60584), voltage and resistance. T120 and T121 are characterized by compact size and spring clamps connections. All available operating parameters are configurable by EASY SETUP / EASY LP software.
MSC (Multifunction Smart Calibrator) is a flexible device for maintenance and testing of sensors and process meters. With best-inclass accuracy at 0.05% for each type of input / output, MSC offers measurement, generation and simulation of analog and digital signals, temperature sensors and load cells. Data visualization and parameters setting are provided by multilanguage Windows PC software (MSC) with USB cable or Bluetooth 4.1 connection through the mobile app (MSC by SENECA) available for iOS and Android devices.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-Line Series offers a full range of signal conditioners including analog/digital/serial converters, temperature transmitters, galvanic isolators, splitters, trip amplifiers and math modules. They work at 10-40 Vdc/ 19-28 Vac, 85-265 Vac/dc or are supplied by the loop. Z-Line modules ensure from 1.500 Vrms to 4.000 Vrms isolation voltage for 1 minute at three points. They also supply the transducer and can have active/passive input/output and they are designed to be mounted on DIN 46277 rail.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The S6001-RTU is a compact all-in-one telecontrol unit with 31 channels. Thanks to the extended connectivity (3G +, Ethernet, Serial) the unit is expandable and can be interfaced with other systems through the support of protocols (ModBUS TCP-IP, ModBUS RTU) and allows communications to and from central units and the remote monitoring of the plants. Using the IEC 61131 Soft Logic on Straton platform, S6001-RTU can be used as a stand-alone control system. Features of compactness and technological concentration of the S6001-RTU allow a significant reduction in costs and an optimization of intervention times in remote control applications for water and general purpose networks.
High Efficiency Surge Protections are designed to protect systems and electrical devices against pulses and transient overvoltages determined by atmospheric origin and electrical operations. These are used in the lightning and overvoltage protection systems between the Lightning Protection Zone 0A (LPZ 0A) and LPZ 1 (please refer to the image below). This kind of SPD has to repeatedly conduct partial lightning currents with 10/350 μs waveform preventing their propagation into the electrical installation of the structure.
High Efficiency Surge Protections are designed to protect systems and electrical devices against pulses and transient overvoltages determined by atmospheric origin and electrical operations. These are used in the lightning and overvoltage protection systems between the Lightning Protection Zone 0A (LPZ 0A) and LPZ 1 (please refer to the image below). This kind of SPD has to repeatedly conduct partial lightning currents with 10/350 μs waveform preventing their propagation into the electrical installation of the structure.
This serie of products allows to integrate a DeviceNet network with a CANopen net.The HD67134 is a DeviceNet Slave / CANopen Converter and it allows you to connect a DeviceNet net (for example an Allen-Bradley PLC..) with a CANopen network in order to exchange the informations between the networks.
High precision temperature transmitters for head mounting, T120 and T121, are designed for universal application on machines, plants, installations and in process industry. They convert the input signals and retransmit them into a normalized signal in current through a 4-20 milliAmpère loop. Input signals can come from 2, 3, 4-wire RTD sensors such as Pt100 (EN 60751) and Ni100 (DIN 43760). The T121 model also acquires Pt500, Pt1000, and thermocouple signals from J, K, R, S, T, B, E, N type (EN 60584), voltage and resistance. T120 and T121 are characterized by compact size and spring clamps connections. All available operating parameters are configurable by EASY SETUP / EASY LP software.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
SENECA offers also sensors calibration service for Pt100 and / or thermoresistances including sensor installed aboard.Standard Pt100 probe (IEC 751), 3 wires technique, A or B class.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
S200REG/16 from 14 to 18 Vdc, maximum current 500 mA S200REG/24 from 22 to 26 Vdc, maximum current 350 mA Used industrially for powering instruments that require a stabilized power supply.
Z-Line Series offers a full range of signal conditioners including analog/digital/serial converters, temperature transmitters, galvanic isolators, splitters, trip amplifiers and math modules. They work at 10-40 Vdc/ 19-28 Vac, 85-265 Vac/dc or are supplied by the loop. Z-Line modules ensure from 1.500 Vrms to 4.000 Vrms isolation voltage for 1 minute at three points. They also supply the transducer and can have active/passive input/output and they are designed to be mounted on DIN 46277 rail.
Z202-LP is an universal converter for AC or DC voltages (0..500 Vac or 0..540 Vdc) and provides an isolated 4..20mA output. It’s a loop powered device through the 4..20mA loop output. Is possible to calibrate the instrument on any intermediate point in the continuous range of 0..500A. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
High Efficiency Surge Protections are designed to protect systems and electrical devices against pulses and transient overvoltages determined by atmospheric origin and electrical operations. These are used in the lightning and overvoltage protection systems between the Lightning Protection Zone 0A (LPZ 0A) and LPZ 1 (please refer to the image below). This kind of SPD has to repeatedly conduct partial lightning currents with 10/350 μs waveform preventing their propagation into the electrical installation of the structure.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
High Efficiency Surge Protections are designed to protect systems and electrical devices against pulses and transient overvoltages determined by atmospheric origin and electrical operations. These are used in the lightning and overvoltage protection systems between the Lightning Protection Zone 0A (LPZ 0A) and LPZ 1 (please refer to the image below). This kind of SPD has to repeatedly conduct partial lightning currents with 10/350 μs waveform preventing their propagation into the electrical installation of the structure.
MY Series includes hand-held transmitters that turn your Android mobile devices such as smartphones or tablets into data acquisition systems. Easily configurable via dedicated Android app, MY Series allows the display of temperature (RTD, TC) and humidity values in analog or digital format, enabling sharing of instant measurement via SMS, email and other common data platforms. MY Series is the suitable solution for professional, certified and industrial measurements in several application (machinery, environmental chambers, food storage and transport, laboratories, HVAC systems etc...) both for diagnostic purposes and environmental parameters monitoring.
MY Series includes hand-held transmitters that turn your Android mobile devices such as smartphones or tablets into data acquisition systems. Easily configurable via dedicated Android app, MY Series allows the display of temperature (RTD, TC) and humidity values in analog or digital format, enabling sharing of instant measurement via SMS, email and other common data platforms. MY Series is the suitable solution for professional, certified and industrial measurements in several application (machinery, environmental chambers, food storage and transport, laboratories, HVAC systems etc...) both for diagnostic purposes and environmental parameters monitoring.
MY Series includes hand-held transmitters that turn your Android mobile devices such as smartphones or tablets into data acquisition systems. Easily configurable via dedicated Android app, MY Series allows the display of temperature (RTD, TC) and humidity values in analog or digital format, enabling sharing of instant measurement via SMS, email and other common data platforms. MY Series is the suitable solution for professional, certified and industrial measurements in several application (machinery, environmental chambers, food storage and transport, laboratories, HVAC systems etc...) both for diagnostic purposes and environmental parameters monitoring.
Dual stabilized power supply with + 15 Vdc 350 mA and - 15 Vdc 75 mA outputs. 115 / 230 Vac mains input. Used industrially for powering instruments that require dual stabilized power supply at ± 15Vdc. The input is protected against line over-voltages by means of a varistor. The insulation between the mains and low voltage circuits is 4500 Vac. The outputs are self-protected against short circuits. The self-extinguishing Noryl case is the width of 4 DIN modules, with heatsink on the upper side, and is designed to fit on 35 mm mounting rail (DIN 46277).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
K107USB is an interface able to implement a RS485 serial port by using a PC USB port. The available drivers will recognize the serial interface as a standard serial port; so the use of the product is directly allowed through any software able to communicate with the standard serial ports of the operating system (COM1, COM2, etc). RS485 and USB ports are isolated from each other at 1500 V.
S6001 controllers are fully integrable in LET’S, remote access SENECA platform, with the support VPN and SSL technology. LET’S supports up to 496 devices in Single LAN Telecontrol mode (always on) or Point- To-Point Remote Assistance (on demand). With the centralized software of server management, VPN BOX Manager, network configuration can be set up in a few steps. On each client it runs VPN Client Communicator, an intuitive software which guarantees an easy remote access to machines and plants and by installation sites.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
K109S is a device that accepts mA/V signals able to convert it into mA/V standard signals.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CAN/Modbus - CAN/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
SENECA offers also sensors calibration service for Pt100 and / or thermoresistances including sensor installed aboard.Standard Pt100 probe (IEC 751), 3 wires technique, A or B class.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
MY Series includes hand-held transmitters that turn your Android mobile devices such as smartphones or tablets into data acquisition systems. Easily configurable via dedicated Android app, MY Series allows the display of temperature (RTD, TC) and humidity values in analog or digital format, enabling sharing of instant measurement via SMS, email and other common data platforms. MY Series is the suitable solution for professional, certified and industrial measurements in several application (machinery, environmental chambers, food storage and transport, laboratories, HVAC systems etc...) both for diagnostic purposes and environmental parameters monitoring.
The K107B is designed to accept a single half duplex RS-485 input and give a single, isolated, half duplex RS-232 output, the K107B is ideal for most serial conversions and isolated transmissions over long distances. Being a K-Liner it features a super slim enclosure, just 102.5x93.1x6.2 mm. The DIN-Rail mountable K107B offers optional K-BUS connectivity allowing further savings in time and wiring by bussing together the nominal 24V DC power supply connections.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
MY Series includes hand-held transmitters that turn your Android mobile devices such as smartphones or tablets into data acquisition systems. Easily configurable via dedicated Android app, MY Series allows the display of temperature (RTD, TC) and humidity values in analog or digital format, enabling sharing of instant measurement via SMS, email and other common data platforms. MY Series is the suitable solution for professional, certified and industrial measurements in several application (machinery, environmental chambers, food storage and transport, laboratories, HVAC systems etc...) both for diagnostic purposes and environmental parameters monitoring.
Z-Line Series offers a full range of signal conditioners including analog/digital/serial converters, temperature transmitters, galvanic isolators, splitters, trip amplifiers and math modules. They work at 10-40 Vdc/ 19-28 Vac, 85-265 Vac/dc or are supplied by the loop. Z-Line modules ensure from 1.500 Vrms to 4.000 Vrms isolation voltage for 1 minute at three points. They also supply the transducer and can have active/passive input/output and they are designed to be mounted on DIN 46277 rail.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Power supply : 19-40Vdc, 19-28 Vac Channels : N.1 Status indicators : Power, Setting error, Off scale Galvanic Isolation : Power supply // input // output at 1500 Vac, digital Hot swapping : Yes Power consumption : 2,5 W
Single alarm threshold for control of analogue signals. Widely used as alarm unit in control of temperature, pressure, flow rate, level etc. The analogue input can be programmed via dip switches for all the standard signals used industrially. current 0 - 20 mA and 4 - 20 mA. voltage 0 - 5 Vdc, 1 - 5 Vdc, 0 - 10 Vdc and 2 - 10 Vdc.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
For energy applications the controller S6001-RTU-E provides for the support for IEC 60870-101 / 104 and IEC 61850 communication protocols. The unit it can be used as a redundant controller for plant automation, management energy produced, management of renewable energy plants (biomass, photovoltaic, wind power), smart grids, distributed networks, etc. It is also settable as a web server, gateway and TCPIP node that can be integrated with SCADA supervision platforms, EMS and Web. S6001-RTU-E integrates Straton programmable logic control and offers a flexible solution for automation, remote control and communication in the field of power grids where high performance and system availability are among the essential requirements.
An air-cored toroidal winding is placed around the conductor, the magnetic field produced by the current induces in the coil a voltage proportional to the rate of change of current. Integrating this voltage the output become proportional to the current (as for a current transformer). Coil length variates from 25 to 300 cm for a cord diameter up to 8 mm.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-Line Series offers a full range of signal conditioners including analog/digital/serial converters, temperature transmitters, galvanic isolators, splitters, trip amplifiers and math modules. They work at 10-40 Vdc/ 19-28 Vac, 85-265 Vac/dc or are supplied by the loop. Z-Line modules ensure from 1.500 Vrms to 4.000 Vrms isolation voltage for 1 minute at three points. They also supply the transducer and can have active/passive input/output and they are designed to be mounted on DIN 46277 rail.
Z-Line Series offers a full range of signal conditioners including analog/digital/serial converters, temperature transmitters, galvanic isolators, splitters, trip amplifiers and math modules. They work at 10-40 Vdc/ 19-28 Vac, 85-265 Vac/dc or are supplied by the loop. Z-Line modules ensure from 1.500 Vrms to 4.000 Vrms isolation voltage for 1 minute at three points. They also supply the transducer and can have active/passive input/output and they are designed to be mounted on DIN 46277 rail.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
S604 and S711 Series are instruments for the measurement and storage of electrical parameters. They are particularly suitable when a device for analysis and control is required consumption, with an excellent price/performance ratio. Rogowski current transducers versions offer extreme ease of connection and can be used in applications with high currents, linear measurements, retrofitting, energy audits etc. On request, the tools can communicate through the RS485 serial port with ModBUS RTU/ASCII protocol or via Ethernet port with ModBUS TCP-IP protocol. It also is supplied ENERGY POWER PACK software for remote management of the instrument. It’s available also a Web server interface for the management of the instrument from any PC connected to LAN/Internet network.
SENECA K-Line compact signal converters have a 6,2 mm ultra slim case. These multi-point galvanic isolators convert temperature, analog, digital and serial signals. The module’s main features are its compact size, installation on 35 mm DIN rails, a bus-connector power supply option, top level accuracy class, quick connection possibility by using clamp terminals and an easy configuration in the field by means of a DIP swtitches.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-Line Series offers a full range of signal conditioners including analog/digital/serial converters, temperature transmitters, galvanic isolators, splitters, trip amplifiers and math modules. They work at 10-40 Vdc/ 19-28 Vac, 85-265 Vac/dc or are supplied by the loop. Z-Line modules ensure from 1.500 Vrms to 4.000 Vrms isolation voltage for 1 minute at three points. They also supply the transducer and can have active/passive input/output and they are designed to be mounted on DIN 46277 rail.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CAN/Modbus - CAN/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
K121 is a high performance universal converter / isolator designed to convert main analog signals (mA, mV, V, PT100, Pt1000, Pt500, Ni100, TCs, Ohm) and turn it into 4..20 mA loop powered signal. The module offers best-in-class accuracy (0,1%, 16 bit) and reduced response time (Voltage and Current input) @140 ms. The output mode (normal/inverted), scale overrange, output in case of fault sensor are selectable parameters by PC software EASY SETUP / EASY LP. A 2-way galvanic isolation among input // output circuits assures the integrity of your datas.
K109UI is a device that accepts mA/V signals able to convert it into mA/V standard signals. It’s configurable for input up to 30V (battery voltage monitoring) and all parameters are configurable through dip-switches.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
S604 and S711 Series are instruments for the measurement and storage of electrical parameters. They are particularly suitable when a device for analysis and control is required consumption, with an excellent price/performance ratio. Rogowski current transducers versions offer extreme ease of connection and can be used in applications with high currents, linear measurements, retrofitting, energy audits etc. On request, the tools can communicate through the RS485 serial port with ModBUS RTU/ASCII protocol or via Ethernet port with ModBUS TCP-IP protocol. It also is supplied ENERGY POWER PACK software for remote management of the instrument. It’s available also a Web server interface for the management of the instrument from any PC connected to LAN/Internet network.
Z-SG / Z-SG2 are strain gauge load cell converters. The measurement, carried out with 4 or 6-wire technique, is available via ModBUS RTU serial protocol or analog output. The communication is configurable via DIP-switch or via software by connecting to the device with the Micro USB port on the front panel. Z-SG and Z-SG2 are galvanically isolated 3-way modules up to 1500 Vac. The load cell sensitivity varies from 1 to 64 mV/V. The instruments are configurable via DIP-switch and software (EASY SETUP). The strain gauge can be directly powered by the instrument. The load cell calibration can be managed through sample weight or software. The Z-SG2 version stands out for new functions (piece counter, automatic tare reset, threshold alarm, firmware upgradeable automatically) and new flexible measurement management modes (measurements available both in full and floating point, measurement stabilized by anti-noise filter, configurable resolution).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between CAN/Modbus - CAN/Power Supply - Modbus/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Triple alarm threshold for control of analogue signals.
Widely used as alarm unit in control of temperature, pressure, flow rate, level etc.
The analogue input can be programmed via dip switches for all the standard signals used industrially.
current 0 - 20 mA and 4 - 20 mA.
voltage 0 - 5 Vdc, 1 - 5 Vdc, 0 - 10 Vdc and 2 - 10 Vdc.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
K109LV allows a conversion of the signals with mV (±25 mV.. ±2000 mV) standard into mA/V standard signals.
MY Series includes hand-held transmitters that turn your Android mobile devices such as smartphones or tablets into data acquisition systems. Easily configurable via dedicated Android app, MY Series allows the display of temperature (RTD, TC) and humidity values in analog or digital format, enabling sharing of instant measurement via SMS, email and other common data platforms. MY Series is the suitable solution for professional, certified and industrial measurements in several application (machinery, environmental chambers, food storage and transport, laboratories, HVAC systems etc...) both for diagnostic purposes and environmental parameters monitoring.
High Efficiency Surge Protections are designed to protect systems and electrical devices against pulses and transient overvoltages determined by atmospheric origin and electrical operations. These are used in the lightning and overvoltage protection systems between the Lightning Protection Zone 0A (LPZ 0A) and LPZ 1 (please refer to the image below). This kind of SPD has to repeatedly conduct partial lightning currents with 10/350 μs waveform preventing their propagation into the electrical installation of the structure.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
TRMS Continuous And Alternate Voltage Converter Z204-1
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Module for conversion of a current or voltage analogue signal into a frequency (pulses) directly proportional to the signal applied. Widely used as an "integrator" for totalizing, with a pulse counter, flow rate signals generated by meters with analogue output signal.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z104 allows a conversion of the current or voltage input signal into a series of pulses with constant duration.A typical use is when, with a flow meter featuring an analogue output (example 4-20mA), the flow must be totalized. the output is programmable in a range from 1 pulse every 2 hours to 10 KHz. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-4TC-D allows to acquire up to N.4 Thermocouple sensors (J,K, E, N, S, R ,B ,T) through a PLC with only digital input/output. The PLC interface is based on three PNP-type signals suited for connection to most PLCs available in the market. The interface is composed of a CLOCK signal generated by the PLC (transistor output), a DATA signal and STROBE signal generated by the module.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
K107USB is an interface able to implement a RS485 serial port by using a PC USB port. The available drivers will recognize the serial interface as a standard serial port; so the use of the product is directly allowed through any software able to communicate with the standard serial ports of the operating system (COM1, COM2, etc). RS485 and USB ports are isolated from each other at 1500 V.
Module for conversion of a current or voltage analogue signal into a frequency (pulses) directly proportional to the signal applied. Widely used as an "integrator" for totalizing, with a pulse counter, flow rate signals generated by meters with analogue output signal.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE application
High Efficiency Surge Protections are designed to protect systems and electrical devices against pulses and transient overvoltages determined by atmospheric origin and electrical operations. These are used in the lightning and overvoltage protection systems between the Lightning Protection Zone 0A (LPZ 0A) and LPZ 1 (please refer to the image below). This kind of SPD has to repeatedly conduct partial lightning currents with 10/350 μs waveform preventing their propagation into the electrical installation of the structure.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z201 accepts an alternate current (5 or 10Aac) and provides an isolated analog output (mA or V). It disposes also of dip switches to set the output ranges. It can be requested with low or high power supply. A 3-way galvanic isolation among power supply // input // output circuits assures the integrity of your datas.
Z190 allows to make the addition or the subtraction of 2 analog signal (mA or V) and get the equivalent output by an analog signal (mA or V). The two inputs can have also different importance. It disposes of dip switches to set the available input/output ranges. The auxiliary power supply allows also an active or passive connections on the output side. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-KEY-MBUS allows the conversion from M-Bus protocol (Meter Bus) to ModBUS RTU / ModBUS TCP-IP. It is a converter that can read, convert and transfer data up to 25 M-Bus instruments. It is available with Ethernet, RS485 and RS485 / RS232 interfaces, and equipped with a buil-in M-Bus port. The converter scans the network in search of Meter- Bus devices at the set speed, automatically downloads the configuration from the identified devices, automatically builds the ModBUS mapping, pointing the address and type of data.
The HD67118 is a fully transparent RS232 / RS485 Converter that allows you to interface a RS232 network with a RS485 network
Easy to get the message across the data flow control by microprocessor.
Z202 accept an alternate voltage (10..490 Vac) and provides an isolated analog output (mA or V). It disposes also of dip switches to set the specific range, input and output. It can be requested with low or high power supply. Z202 can be used also as a microammeter (500 µAfs).A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
Z201 accepts an alternate current (5 or 10Aac) and provides an isolated analog output (mA or V). It disposes also of dip switches to set the output ranges. It can be requested with low or high power supply. A 3-way galvanic isolation among power supply // input // output circuits assures the integrity of your datas.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-4AI-D allows to acquire up to N.4 analogue inputs (ma or V) through a PLC with only digital input/output. The PLC interface is based on three PNP-type signals suited for connection to most PLCs available in the market. The interface is composed of a CLOCK signal generated by the PLC (transistor output), a DATA signal and STROBE signal generated by the module.
Z-PASS2 is a multifunction device (industrial gateway / serial device server / Router 3G+/4G) with built-in I/O and GPS receiver, designed to manage up to a maximum of 32 clients. The device has nr.1 digital input for security interlock of remote connection, nr.1 digital output for signaling of VPN running connection and nr.4 configurable digital channels. Equipped with nr.2 Fast Ethernet ports (managed in Switch and LAN / WAN mode ), nr.3 serial ports and nr.1 USB host 2.0 port, ZPASS2 supports protocols such as ModBUSTCP Server, ModBUSRTU Master/ Slave, FTP/SFTP Server, HTTP/HTTPS Server, OpenVPN, SSL.
S117P1 is a multi-function instrument: serial converter, isolator signal and programming kit. It enables asynchronous conversion of RS232 / RS485 / TTL type, using a USB port on the PC. The serial interface is handled by the operating system as a standard system serial port, allowing the use of the product in direct way through any software that can communicate with the standard serial ports made available by the operating system (COM1, COM2 etc.). RS232, RS485 and TTL ports are also electrically isolated from the USB port, allowing you to remove many electrical noise problems that can occur due to example when the connected equipment is far away from the PC. S117P1 ensures full compatibility with Windows operating systems Windows Server, Windows CE, Linux, Mac OS X.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Module for conversion of a current or voltage analogue signal into a frequency (pulses) directly proportional to the signal applied. Widely used as an "integrator" for totalizing, with a pulse counter, flow rate signals generated by meters with analogue output signal.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z111 allows a conversion of a frequency signal and provides a mA/V standard output signal. The input is programmable in a range from 1 mHz to 9,99 KHz. It’s completely configurable through dip switches. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
EASY-USB is a serial communication converter that convert the signal from the USB to a standard UART TTL signal and viceversa.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
S91 is a protection device for electric motors that allows the detection of wrong phase sequence or lack of a phase, of the excess current consumption, no-load operation with the power factor measurement. Equipped with rotary programming switches and a display of alarm signaling, the device is characterized by an input for PTC to protect the motor from overtemperature and enable input for starting the engine. S91 operates in 3 operation modes: single-phase or threephase, maximum current range 5 or 16 A, operation with or without PTC. Main applications are protection of single-phase or three-phase pumps for possible rotor stop and for overtemperature as well as device failure detection of mechanical transmission (e.g. belts or chains) with protection against transmission system lockdown.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The Z170REG-1 module acquires a universal input signal and converts it into an analog format, returning two independent and isolated universal outputs. Isolation voltage between power supply / input / output features 1.500 Vac. The signal converter offers the possibility to choose between different types of input: voltage, current, potentiometer, thermocouple (TC) by thermoresistance (RTD). The two analog outputs have 14-bit resolution. Selecting the current input it’s possible to power an external sensor. The module has a Micro USB connector on the front panel and can be configured by software or specific App for Android devices.
Z-PASS1 is an industrial gateway / serial device server that can handle up to 32 clients. The device has nr.1 digital input for remote connection security interlock, nr.1 digital output for VPN connection online signal. nr.1 digital output for general purpose and nr.1 DI/DO configurable free, Featuring nr.2 Fast Ethernet ports (switch and LAN / WAN mode),nr.1 RS232/RS485 port, nr. 2 RS485 ports and nr. 1 Micro USB host 2.0 port,, Z-PASS1 supports ModBUS TCP server, ModBUS RTU master, ModBUS RTU slave, FTP server, SFTP server, HTTP server, HTTPS server, OpenVPN protocols.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-KEY is a device that can extend networks and allow the transfer of process data between different levels of IT and industrial communication architecture. Z-KEY guarantees signals transmission between ModBUS TCP-IP / ModBUS RTU in different modes, increasing the number of connected nodes and network distances. The device can also extend the serial network operating as a transparent Remote virtual COM to the serial communication protocol.
The HD67153 is a CANopen/ DeviceNet Master Converter and it allows you to connect some DeviceNet slave with a CANopen network in order to exchange the informations between the networks. It is a DeviceNet Slave / CANopen Converter and it allows you to connect a DeviceNet net (for example an Allen-Bradley PLC..) with a CANopen network in order to exchange the informations between the networks.
Module for conversion of measuring signals with galvanic separation, with two outputs galvanically insulated both from the input and from each other. Insulation voltage between input and outputs and between output and 2500 Vac output via two linear optoisolators for separation of the signals. Widely used for conversion of easuring signals when the same signal, sometimes with different standards, has to be transmitted to two different instruments, keeping the circuits galvanically separate to prevent interferences, or when the load on the current loop is higher than the maximum drivable load.
S2000 has a microprocessor with a serial gate, some analog and digital inputs and outputs.(see later features). It has a resident software (it means non modify , it is possible only if you substitute EPROM), it can do a certain number of operations stored in an EEPROM (Electrically Erasable Read Only Memory). Executing operation type is fixed (chapter 3 describes them), while their number is function of EEPROM's loading. Normally one instruction loads one byte while one number loads 4 byte; maximum bytes is 240. Operations to do at first are written by a PC in a file, by text editor "EDIT" standard in MS-DOS, where it is possible to modify, store and call-up as a normal text file.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z110 is a 4..20mA isolator powered through the input loop. It does not require any auxiliary power supply. Z110 is available in two different version: Z110S (single channel) or Z110D (double channel). A 2-way galvanic isolation between input // output circuits assures the integrity of your datas.
Z-FLOWCOMPUTER is a flow computer for gas, steam and water application. The unit is equipped with nr. 4 PNP / NPN digital inputs, nr. 2 voltage / current analog inputs, nr. 1 universal analog input, nr. 2 relay digital outputs and nr. 1 analog voltage / current output. Z-FLOWCOMPUTER is supplied with a 4,3” touch screen HMI which communicates via the RS485 port. The versatility of this controller, which is guaranteed by input signal different standards, allows applications such as corrected flow or energy efficiency calculation for white certificates issue.
Z107 allows a transparent conversion and isolation of RS485/ RS422 serial line into RS232 and viceversa. The RS232 connection is available both on terminals and RJ10 connector. As well the RS485 connection is available both on terminals and back side connector.
Stabilized power supply with 115 / 230 Vac mains input and 24 Vdc 40 mA output. Used industrially to power instruments in 4-20 mA current loop or to power from the mains instruments that require 24 Vdc stabilized voltage.
Z-TWS11 is a multifunction and multi-protocol programmable control unit based on IEC 61131-1 SoftPLC Straton workbench. The controller also includes n. 2 16-bit analog inputs configurable voltage or current and can be the platform to realize automation systems with expandable ModBUS / Ethernet I/O modules MODBUS. Z-TWS11 high-level connectivity is granted by n.1 RJ45 10/100 MbpsEthernet port, n.1 RS485 port, n.1 RS232 / RS485 port, n.1 microUSB port. The unit supports FTP client, SMTP client, http, MODBUS TCP, MODBUS RTU communication protocols. Z-TWS11 make possibile configuration and firmware upgrading by Web Server.
R-KEY-LT is a compact and reliable Modbus gateway that converts from Modbus TCP-IP protocol to Modbus RTU / ASCII and vice versa. It supports up to 8 TCP-IP Modbus clients simultaneously and 10 Modbus TCP-IP servers. Through this model, serial Modbus slave devices can be integrated into an existing TCP-IP Modbus network as well as Modbus TCP-IP slave devices can be made accessible to serial master. R-KEY-LT can be configured through web server and software tools. The module has Vac / dc power on the same hardware, 1,5 kVac isolation, extended temperature range. The device can be powered also by a 230 Vac power supply unit.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-SG / Z-SG2 are strain gauge load cell converters. The measurement, carried out with 4 or 6-wire technique, is available via ModBUS RTU serial protocol or analog output. The communication is configurable via DIP-switch or via software by connecting to the device with the Micro USB port on the front panel. Z-SG and Z-SG2 are galvanically isolated 3-way modules up to 1500 Vac. The load cell sensitivity varies from 1 to 64 mV/V. The instruments are configurable via DIP-switch and software (EASY SETUP).
K120RTD is a converter for Thermoresistance PT100/Ni100 with 2,3,4 wires and convert / isolate it into 4..20mA loop powered signal. It’s completely configurable through dip switches or PC software. The output signal is not isolated from the input one.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-TWS5 is a powerful controller based on ARM Cortex A8 600 MHz, designed for automatic machines and industrial plants, programmable with SoftPLC Codesys - IEC 61131-3 standard. Z-TWS5 is a multifunction PLC, data logger and web server. With RAM DDR2 256 MB, Flash 128 MB and slot for microSD card up to 32 GB, Z-TWS5 is a controller with nr.2 10/100 MB Fast Ethernet ports including switch hub, nr.1 CAN port, nr.3 RS485 ports, nr.1 RS232 port, nr.2 USB ports (OTG and Host). The available communication protocols are Modbus RTU, ModBus TCP-IP and CANopen.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z109S-DI is a device that allows to isolate and convert a 0/4 - 20 mA signals. The device can power also all 2-wire sensors providing a stabilized voltage of 20 V and a max current of 20 mA with short-circuit protection. A 3-way galvanic isolation of 3.500 Vac among Power supply // input // output circuits assures the integrity of your data.
Z1090UI2-1 is a voltage to current converter with 3-point isolation 1500 Vac and sensor power supply in 2-wire technique (20 Vdc stabilized, 20 mA max, protected against short circuit). Measurement and retransmission of the data is done on isolated analog output, with voltage output or in active/passive current. Through DIP-switches are selectable type of input, START-END, output mode (zero elevation, inversion, scale), output type (mA or V). Heir to the Z109UI2, Z109UI2-1 converter has on the front side the communication port in format Micro USB (replacing the 3.5 mm jack port). Through the Micro USB it is possible to configure the module not only via PC but also via mobile app “EASY Setup App”.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The Z-8TC-LAB module acquires up to 8 single-ended signals (voltage-type, from the: signal generator or thermocouple) and it converts them to a digital format.
Z-TWS4 is a high performance control unit with 4 I/O built-in channels, 1GB Flash memory, 64GB RAM, nr.1 CAN port, nr.4 seral ports, nr.2 USB ports, nr. 2 Ethernet ports and 1 Micro SD card slot up to 32GB. Suitable for energy application (IEC 60870-5-101, IEC 60870-5-104, IEC 61850) and plant automation (Straton - Soft PLC IEC 61131-3). Z-TWS4 is also a CPU Linux-based for data acquisition and control application. Through to the integration with IDE Straton environment, Z-TWS4 supports specific communication protocols in the energy applications such as IEC 60870, IEC 61850.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
K109TC is a converter for Thermocouples TCs (J, K, E, N, S, R ,B,T) and provides a mA/V standard output signal. Beside available there is a configurable threshold (relay) that may generate an alarm or may be utilized like a thermostat. It’s completely configurable through dip switches/trimmer. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The Z-4TC module acquires up to 4 single-ended signals (voltage-type, from the: signal generator or thermocouple) and it converts them to a digital format using the Modbus RTU Protocol. A double serial interface (RS232 or RS485) it’s also available (Modbus RTU protocol).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-MBUS adapter, connected to the serial port COM1 - RS232 of Seneca Z-TWS4, Z-PASS2-S S6001-RTU and other controllers, allows the support of M-Bus networks by powering up to 25 M-Bus devices per module. Alternatively, with the Micro USB port on board, you can access to the M-Bus network from a PC. From the webserver interface integrated in SENECA controller it is possible to scan / configure / diagnose Z-MBUS slave devices. The management of M-Bus devices is done through integrated tools in the web server configuration, scanning, diagnostics and appropriate IEC 61131 Straton reading function block.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-KEY is a device that can extend networks and allow the transfer of process data between different levels of IT and industrial communication architecture. Z-KEY guarantees signals transmission between ModBUS TCP-IP / ModBUS RTU in different modes, increasing the number of connected nodes and network distances. The device can also extend the serial network operating as a transparent Remote virtual COM to the serial communication protocol.
K109PT-HPC is an high performance converter for Thermoresistance PT100 with 2,3,4 wires and provides a mA/V standard output signal. The max admitted error is lower than K109PT because reported to a smaller range. It’s completely configurable through dip switches. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
Acquires 16 single-ended digital signals, it converts them to a digital format (IN 1-16 state) and it counts the input-pulse number (pulse counter for IN 1-8). Controls 8 digital outputs (OUT1-OUT8), each of them (by MOSFET) actives/deactivates a output load. Z-PC line is a complete line of I/O modules with CANopen standard interface that does not require any couplers, controllers, or repeaters. All modules have an integrated interface with CANopen communication, speeds up to 1 Mbps, and they are ideal for acquisition and control signals for system and machines where the distance between signals plays a key role. Z-PC line CANopen modules can be integrated with third parts configurators and master controllers / network managers, even on board existing machines and installations.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-PASS2-S is a high performance multifunction controller including PLC, routing and remote access functions. The device is based on Straton softPLC with web server, VPN and 3G + or 4G LTE modem/route. Equipped with nr.2 Fast Ethernet ports (managed in Switch mode and LAN / WAN), Nr. 1 RS232/RS485 port, Nr.2 RS485 ports and nr.1 USB host 2.0 port, Z-PASS2-S supports ModBUS TCP Server, ModBUS RTU Master/Slave, FTP/SFTP Server, HTTP/HTTPS Server, OpenVPN, SLL and – optionally - Energy Management protocols (IEC 60870-101, IEC 60870-104, IEC 61850).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
S201RC-LP is a loop powered converter suitable for ac current measurements coupled with Rogowski sensors. This converter is characterized by low consumption (<0.6 W) and works with a sensor that provides 100 mV/kA as output signal for TRMS measurements. The input scales are selectable as 250, 500, 1.000, 2.000, 4.000 A. S201RC-LP provides power surge protection, reverse polarity and damping filter (0.5 s / 1 s). The combined use with Rogowski sensor ensures good accuracy, shielding against electromagnetic noise and allows the user to cover applications with difficult access due to the non-intrusiveness measurement system. Typical applications of S201RC-LP are high current measurement of existing plants, load, power and consumption monitoring, laboratory measuring instruments and welding machines control.
Z-4TC-D allows to acquire up to N.4 Thermocouple sensors (J, K, E, N, S, R ,B ,T) through a PLC with only digital input/output. The PLC interface is based on three PNP-type signals suited for connection to most PLCs available in the market. The interface is composed of a CLOCK signal generated by the PLC (transistor output), a DATA signal and STROBE signal generated by the module.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The Z-8TC module acquires up to 8 single-ended signals (voltage-type, from the: signal generator or thermocouple) and it converts them to a digital format (normalized measure).
Z109S is a device that allows to isolate a mA signals. The device can power also all 2-wire sensors and it can be used to solve also power conflicts into the same mA loop. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
The Z-4RTD-2 module acquires up to 4 RTD signals (through 4 inputs regardless and isolated with each other) it converts them it to a temperature or resistance measure.
Z109REG-BP is a converter with universal input in voltage (mV), current (mA), thermocouples (TC), thermoresistance (RTD), potentiometer, rheostat, NTC. The module allows the measurement and retransmission on bipolar isolated analogue output, in voltage or current. Exploiting the mini frontal USB port, Z109REG-BP can be programmed via PC with values of start and end-scale, kind of different input, root extraction, filter, burnout etc.
K111D is a frequency divider (up to 256 pulses at input) with input signal repeater function. It has an isolated and stabilized power supply, front LED light for power and output status. Galvanic isolation for signals from On / Off sensors is 1.500 V. The instrument accepts several types of input signals up to 20 kHz, selectable for 2/3-wire sensors: NPN 12 / 24V, PNP, PNP 12 / 24V, photoelectric impulse, IEC 1131-1 contact, Namur, Reed. The 2 independent outputs are high-current PNP type (up to 200 mA) internally protected against short-circuiting.
Z-TWS4 is a high performance control unit with 4 I/O built-in channels, 1GB Flash memory, 64GB RAM, nr.1 CAN port, nr.4 seral ports, nr.2 USB ports, nr. 2 Ethernet ports and 1 Micro SD card slot up to 32GB. Suitable for energy application (IEC 60870-5-101, IEC 60870-5-104, IEC 61850) and plant automation (Straton - Soft PLC IEC 61131-3). Z-TWS4 is also a CPU Linux-based for data acquisition and control application. Through to the integration with IDE Straton environment, Z-TWS4 supports specific communication protocols in the energy applications such as IEC 60870, IEC 61850.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z109REG2-1 is an advanced universal converter able to manage all analog signals (mA, V, PT100, Pt1000, Pt500, Ni100, TCs, Ohm) and convert / isolate it into mA/V standard signals. The device can be configured through dip-switches, PC software, handheld device or via mobile app. A digital contact is available as ALARM or STROBE (multiplexing). A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.The module has a Micro USB connector on the front side and can be configured by software or specific App for Android devices setting: beginning and end scale, additional input types, square root extraction, filter, burn-out etc.
Z102 accepts signal from rheostat (2 wires) or potentiometer (3 wires) and converts/isolates it into mA/V standard signals. The auxiliary power supply allows also an active or passive connections on the output side. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z202-LP is an universal converter for AC or DC voltages (0..500 Vac or 0..540 Vdc) and provides an isolated 4..20mA output. It’s a loop powered device through the 4..20mA loop output. Is possible to calibrate the instrument on any intermediate point in the continuous range of 0..500A. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
Very simple tool for users who need to interface with a device based on CAN (CAN/CANopen/J1939/NMEA2000/DeviceNet) such as motors, sensors and many other devices. The Analyzer is composed by the software tool and by the Interface to the CAN. The device HD67316-U-D1 is an Analyzer with the interface port: USB. The device HD67316-E-A1 is an Analyzer with the interface port: Ethernet. The device HD67216 is an Analyzer with the interface port: RS232. This tool allows the study and the configuration of CANopen systems using a user interface that allows easy access to the devices and their objects.
The new SENECA energy counters for DIN rail mounting cover the most different application requirements for single-phase and threephase systems. Available with RS485 Modbus, M-BUS or Ethernet + webserver communication interfaces, the energy counters are compliant with MID (2004/22 / EC Directive) in class B with EN 50470 standard. Equipped with Wide backlighted LCD display for easy consultation of the values of energy and power, the counters also make avalilable the diagnostic function signaling polarity errors in the connection.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Test-4 is a reliable support for calibration sessions, laboratory tests and of analog measurements simulation controlled by industrial devices (controllers, DAQ systems etc.). With a total accuracy better than 0.1%, and a whole resolution of 1 μA / 1 mV, Test-4 achieve accurate calibration results. It allows the simulation of ramps in both tension and current value (active or passive). Test-4 is supplied by 220 Vac power network with external AC/DC adapter or by 2 NiMH batteries providing approximately 20 hours of run time.
S6001‐RTU all‐in‐one remote control unit that features 31 I/O channels: 15 PNP digital inputs, 2 digital inputs for thresholds monitoring, 4 analog inputs (0..20 mA), 8 SPDT relay outputs 5A ‐ 250 Vac, 1 analog output (0..10 V), 1 analogue output (0..20 mA). S6001‐RTU is also expandable and can be interfaced with 3rd parts systems supporting ModBUS TCPIP and ModBUS RTU, IEC 60870‐101 / 104, IEC 61850 industrial and energy mangement protocols.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-5DI-2DO is a mixed digital module with Micro USB front port of programming, 5 digital inputs (Redd, Proximity, PNP, NPN, contact) selectable via software, nr.5 totalizers @ 32bit with maximum frequency 5 kHz and settable forwards or backwards, nr.2 SPST relay outputs 2 A 250 Vac NO / NC type selectable via jumper. All totalizers are stored in non-volatile memory (FeRAM).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-SG / Z-SG2 are strain gauge load cell converters. The measurement, carried out with 4 or 6-wire technique, is available via ModBUS RTU serial protocol or analog output. The communication is configurable via DIP-switch or via software by connecting to the device with the Micro USB port on the front panel.
The Z-DAQ-PID module acquires one universal input signal (voltage, current, potentiometer, thermo-couple, thermo-resistance, m-voltmeter) and converts it to an analog format (with PID regulation).
The ranges includes various products for solving all the needs of a CAN line like extension of the line, increase of nodes number, isolation of CANopen branches, protection from spikes noise and electrostatic charger or simply to change the communication baudrate. The HD67117 and HD67117M devices are repeaters/isolators for CANopen buses.
The Z-8NTC is an 8 channels NTC temperature converter with Modbus RTU protocol. For the communication can be used the USB or the RS485 port. The device can measure up to 8 NTC (each channel can be individually configured). The powerful Easy Setup software can be used for obtain the NTC parameters in a simple way.
Z109REG2 is an advanced universal converter able to manage all analog signals (mA, V, PT100, Pt1000, Pt500, Ni100, TCs, Ohm) and convert / isolate it into mA/V standard signals. The device can be configured through dip-switches, PC software, handheld device or via mobile app. A digital contact is available as ALARM or STROBE (multiplexing). A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.The module has a Micro USB connector on the front side and can be configured by software or specific App for Android devices setting: beginning and end scale, additional input types, square root extraction, filter, burn-out etc.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
K109PT is a converter for Thermoresistance PT100 with 2,3,4 wires and provides a mA/V standard output signal. It’s completely configurable through dip switches. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
MY Series includes hand-held transmitters that turn your Android mobile devices such as smartphones or tablets into data acquisition systems. Easily configurable via dedicated Android app, MY Series allows the display of temperature (RTD, TC) and humidity values in analog or digital format, enabling sharing of instant measurement via SMS, email and other common data platforms. MY Series is the suitable solution for professional, certified and industrial measurements in several application (machinery, environmental chambers, food storage and transport, laboratories, HVAC systems etc...) both for diagnostic purposes and environmental parameters monitoring.
The Z-8AI module acquires up to 8 single-ended input signals (voltage or current type) and it converts them to a digital format (normalized measure).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
VPN Box is a server device that allows centralizing the management and connection of the SENECA devices enabled to use a VPN. In a company's (suitably configured) LAN network, the field remote equipment can connect among themselves or to a PC (via Ethernet or 3G modem) and communicate using TCP/IP protocols. With this device it is possible to organize a VPN Single Lan (or Remote Control) or Point to Point (or Remote Service) network.
VPN BOX is a server connectivity module compatible with LET'S technology SENECA devices. It is optimized for Point-to-Point connection where multiple users can reach different devices or Single LAN connection where all the devices are linked in a wide single LAN. VPN BOX offers SSL and VPN security technologies that provide secure access and customizable control. VPN BOX (and virtual machine version VPN BOX VM) is accompanied by two free management software like VPN BOX Manager as a complete configuration tool and VPN Client Communicator as a client application that can handle communication and network access from a single workstation in just a few steps.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
MY ALARM GSM can be used as a monitoring system of the energy produced. At the interface of the smart meter optical energy is applied a photodiode which is connected to the unit MY ALARM GSM.
Advanced data loggers MYALARM SEAL, Z-GPRS3, Z-LOGGER3, Z-UMTS, Z-LTE represent a solution that can respond to the increasing needs for data acquisition, real-time analysis and integration with IT systems in plant automation and monitoring, in compliance with the new productivity and communication models of Industry 4.0 and Internet of Things. Designed to perform remote alarm functions, remote metering and datalogging, these devices are available with built-in UPS, built-in I/O channels, programming and visualization software dedicated, serial and Ethernet communication support, MQTT protocol. They also perform 2G/3G+/4G modems with GNSS/GPS/GLONASS receiver. Optionally the data loggers can be combined with Cloud BOX, an IoT / Cloud solution proposed by SENECA that allows you to centralize data, manage remote connections, develope customizable multi-user supervision pages.
MY ALARM GSM can be used as a monitoring system of the energy produced. At the interface of the smart meter optical energy is applied a photodiode which is connected to the unit MY ALARM GSM.
MYALARM SEAL is a datalogger that can meet the growing demands of data acquisition, analysis in real time and integration with IT systems existing in automation and system/process monitoring. In line with the new productivity and communication models of Industry 4.0 and Internet of Things, it is characterized by a GSM/GPRS modem, 4 Digital Inputs and 2 Analog Inputs, voice alarms/audio controls with DTMF tones and the support of http post, MQTT, CloudBOX compatibility. This unit supports different types of SIM cards and has an 8MB Flash memory, a slot for microSD expandable up to 32GB and multi-tasking real-time operating system. Like all SENECA advanced dataloggers, MYALARM SEAL is fitted also with a built-in UPS that allows an operating autonomy of up to 1 hour in case of lack of primary power supply.
MyAlarm3 Cloud is a service offering the main functions useful to monitoring through immediate consultation and the practical use of both web browser and mobile APP. Using the app, available in the Apple and Android stores, you can check the state of the control unit in real time in case of an alarm (push notifications).
MYALARM2 (MY2B) is a GSM / GPRS telecontrol unit for home & building applications, industrial plants and machines thorugh simple commands sent by SMS text messages, phone rings, emails. It operates with any cell phone or smartphone. With MyAlarm2 is possible to switch a boiler on / off, turn a contact on / off and etc. The device has a GSM / GPRS module inside that works as a telephone terminal on any cellular network. MyALARM2 SECURITY AUDIO (MY2S) is a GSM / GPRS communicator operating autonomously or as expansion for anti-theft and anti-intrusion systems due to ease of installation and programming. MY2S allows sending SMS or voice alarm messages (with SIM Voice) as well as fast commands and acknowledge alarms via DTMF tones.
RTU-LP-ST is a family of low consumption datalogger / RTU for telecontrol and data acquisition of unattended remote sites. The device integrates a Quad Band GSM / GPRS 850/900/1800/1900 MHz modem, nr. 8 I/O channels (4 digital inputs galvanically isolated with 4 totalizers, nr.2 analog voltage / current inputs, nr. 2 relay outputs 30 Vdc) and 2 MB of Flash memory for data logging. The module can power external sensors (max. 100 mA) with automatic pre-start and can run autonomously up to 3 years with standard Li-Ion batteries of 13.000 mA / h @ 10,8 V. with 1 SMS transmission for day, all Inputs OFF, No Aux Power Output, NO RS232 communication). Operating mode include sending log, events, alarms (via SMS or FTP Server), temporary modem switch on for sending messages and command / parameters receiving.
Advanced data loggers MYALARM SEAL, Z-GPRS3, Z-LOGGER3, Z-UMTS, Z-LTE represent a solution that can respond to the increasing needs for data acquisition, real-time analysis and integration with IT systems in plant automation and monitoring, in compliance with the new productivity and communication models of Industry 4.0 and Internet of Things. Designed to perform remote alarm functions, remote metering and datalogging, these devices are available with built-in UPS, built-in I/O channels, programming and visualization software dedicated, serial and Ethernet communication support, MQTT protocol. They also perform 2G/3G+/4G modems with GNSS/GPS/GLONASS receiver. Optionally the data loggers can be combined with Cloud BOX, an IoT / Cloud solution proposed by SENECA that allows you to centralize data, manage remote connections, develope customizable multi-user supervision pages.
Advanced data loggers MYALARM SEAL, Z-GPRS3, Z-LOGGER3, Z-UMTS, Z-LTE represent a solution that can respond to the increasing needs for data acquisition, real-time analysis and integration with IT systems in plant automation and monitoring, in compliance with the new productivity and communication models of Industry 4.0 and Internet of Things. Designed to perform remote alarm functions, remote metering and datalogging, these devices are available with built-in UPS, built-in I/O channels, programming and visualization software dedicated, serial and Ethernet communication support, MQTT protocol. They also perform 2G/3G+/4G modems with GNSS/GPS/GLONASS receiver. Optionally the data loggers can be combined with Cloud BOX, an IoT / Cloud solution proposed by SENECA that allows you to centralize data, manage remote connections, develope customizable multi-user supervision pages.
Advanced data loggers MYALARM SEAL, Z-GPRS3, Z-LOGGER3, Z-UMTS, Z-LTE represent a solution that can respond to the increasing needs for data acquisition, real-time analysis and integration with IT systems in plant automation and monitoring, in compliance with the new productivity and communication models of Industry 4.0 and Internet of Things. Designed to perform remote alarm functions, remote metering and datalogging, these devices are available with built-in UPS, built-in I/O channels, programming and visualization software dedicated, serial and Ethernet communication support, MQTT protocol. They also perform 2G/3G+/4G modems with GNSS/GPS/GLONASS receiver. Optionally the data loggers can be combined with Cloud BOX, an IoT / Cloud solution proposed by SENECA that allows you to centralize data, manage remote connections, develope customizable multi-user supervision pages.
Z-PASS2-S is a high performance multifunction controller including PLC, routing and remote access functions. The device is based on Straton softPLC with web server, VPN and 3G + or 4G LTE modem/route. Equipped with nr.2 Fast Ethernet ports (managed in Switch mode and LAN / WAN), Nr. 1 RS232/RS485 port, Nr.2 RS485 ports and nr.1 USB host 2.0 port, Z-PASS2-S supports ModBUS TCP Server, ModBUS RTU Master/Slave, FTP/SFTP Server, HTTP/HTTPS Server, OpenVPN, SLL and – optionally - Energy Management protocols (IEC 60870-101, IEC 60870-104, IEC 61850). The controller has nr.1 digital input for remote secure security, nr.1 digital output VPN signalling connection and nr.4 digital configurable channels. The device is progammable via Z-NET4 (SENECA system configuration environment) and web server. It includes a ARM9 processor, 1 GB Flash, 64 MB RAM and a Micro SD slot up to 32 GB. Integrated into LET’S platform for remote assistance and telecontrol, ZPASS2- S can support Point-To-Point or Single LAN connections.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons,settings are made by PC software EASY SETUP.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons,settings are made by PC software EASY SETUP.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons, settings are made by PC software EASY SETUP.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons,settings are made by PC software EASY SETUP.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons,settings are made by PC software EASY SETUP.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons,settings are made by PC software EASY SETUP.
S311G is a digital indicator with analog input and voltage / current generator. There are 2 different operating modes. In automatic mode S311G measures an analog value and retransmits it to the output. In manual mode a setpoint is turned into a generated value by the output. In manual mode and switching from automatic to manual mode (or vice versa) it is available a signal attenuation feature (antibumper) in order to avoid actuator hammer or dangerous voltage / current surges. S311G is a digital indicator with universal input including voltage, current and potentiometer.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons,settings are made by PC software EASY SETUP.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons,settings are made by PC software EASY SETUP.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons, settings are made by PC software EASY SETUP.
Microprocessor indicators programmable from keypad with ultrabright red LED 4 digit display. This family of indicators, easy to use and program,displays directly in engineering units the signals provided by the process transducers, with display range from -1999 to 9999. The front panel with polycarbonate membrane is protected to IP41.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Microprocessor indicators programmable from keypad with ultrabright red LED 4 digit display. This family of indicators, easy to use and program, displays directly in engineering units the signals provided by the process transducers, with display range from -1999 to 9999. The front panel with polycarbonate membrane is protected to IP41.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons,settings are made by PC software EASY SETUP.
S-Line Series is a high performance compact/modular indicators / totalizers family. This series offers display choice with 4, 6, 8, 4+7 digits in multiple visualization mode (real-time, integrated, totalized measured values). S-Line indicators support universal input (analog, digital, by sensor) and re-transmitted output mA, V standard. Concerning power supply they ensure an extended range of options: 80-265 Vac; 10-40 Vdc / 19-28 Vac; loop powered. Accuracy class reach 0,1% with 14-16 bit A/D conversion. Optionally S-Line indicators can provide ModBUS interface alarm relay (hysteresys and threshold control) and IP66 case. Besides front key buttons, settings are made by PC software EASY SETUP.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
Remote assistance system enabled on HMI VISUAL Series equipped with Ethernet port. More than 250 drivers available to ensure easy connection to PLCs, temperature controllers, barcode readers etc.
The new SENECA energy counters for DIN rail mounting cover the most different application requirements for single-phase and threephase systems. Available with RS485 Modbus, M-BUS or Ethernet + webserver communication interfaces, the energy counters are compliant with MID (2004/22 / EC Directive) in class B with EN 50470 standard. Equipped with Wide backlighted LCD display for easy consultation of the values of energy and power, the counters also make avalilable the diagnostic function signaling polarity errors in the connection.
The new SENECA energy counters for DIN rail mounting cover the most different application requirements for single-phase and threephase systems. Available with RS485 Modbus, M-BUS or Ethernet + webserver communication interfaces, the energy counters are compliant with MID (2004/22 / EC Directive) in class B with EN 50470 standard. Equipped with Wide backlighted LCD display for easy consultation of the values of energy and power, the counters also make avalilable the diagnostic function signaling polarity errors in the connection.
The new SENECA energy counters for DIN rail mounting cover the most different application requirements for single-phase and threephase systems. Available with RS485 Modbus, M-BUS or Ethernet + webserver communication interfaces, the energy counters are compliant with MID (2004/22 / EC Directive) in class B with EN 50470 standard. Equipped with Wide backlighted LCD display for easy consultation of the values of energy and power, the counters also make avalilable the diagnostic function signaling polarity errors in the connection.
The new SENECA energy counters for DIN rail mounting cover the most different application requirements for single-phase and threephase systems. Available with RS485 Modbus, M-BUS or Ethernet + webserver communication interfaces, the energy counters are compliant with MID (2004/22 / EC Directive) in class B with EN 50470 standard. Equipped with Wide backlighted LCD display for easy consultation of the values of energy and power, the counters also make avalilable the diagnostic function signaling polarity errors in the connection.
The new SENECA energy counters for DIN rail mounting cover the most different application requirements for single-phase and threephase systems. Available with RS485 Modbus, M-BUS or Ethernet + webserver communication interfaces, the energy counters are compliant with MID (2004/22 / EC Directive) in class B with EN 50470 standard. Equipped with Wide backlighted LCD display for easy consultation of the values of energy and power, the counters also make avalilable the diagnostic function signaling polarity errors in the connection.
The new SENECA energy counters for DIN rail mounting cover the most different application requirements for single-phase and threephase systems. Available with RS485 Modbus, M-BUS or Ethernet + webserver communication interfaces, the energy counters are compliant with MID (2004/22 / EC Directive) in class B with EN 50470 standard. Equipped with Wide backlighted LCD display for easy consultation of the values of energy and power, the counters also make avalilable the diagnostic function signaling polarity errors in the connection.
The new SENECA energy counters for DIN rail mounting cover the most different application requirements for single-phase and threephase systems. Available with RS485 Modbus, M-BUS or Ethernet + webserver communication interfaces, the energy counters are compliant with MID (2004/22 / EC Directive) in class B with EN 50470 standard. Equipped with Wide backlighted LCD display for easy consultation of the values of energy and power, the counters also make avalilable the diagnostic function signaling polarity errors in the connection.
Dual stabilized power supply with 115 /230 Vac mains input and two galvanically insulated independent outputs, 24 Vdc 50 mA each.Used industrially to power instruments in 4-20 mA current loop or to power from the mains instruments that require a 24 Vdc stabilized voltage.
Module for conversion of a current or voltage analogue signal into a frequency (pulses) directly proportional to the signal applied. Widely used as an "integrator" for totalizing, with a pulse counter, flow rate signals generated by meters with analogue output signal.
Power supply with galvanic separation for 0-20 mA and 4-20 mA current loops, with insulation voltage of 2000 Vac between the input and output circuits, high linearity and precision. Powers both the input and output loop at a voltage of 20Vdc, used for insulating measuring circuits between transducers in the field and acquisition instruments in order to prevent interferences.
Module for conversion, with high linearity and precision, of measurement signals with three-point galvanic separation. The instrument powers transmitters on both the input and output loops. The insulation voltage between input and output is 4500 Vac. Used for the conversion of measurement signals when it is necessary to interface instruments with different standards of signal and galvanically separate the input circuit from the output circuit in order to prevent interferences.
Instrument with galvanic separation for converting a temperature signal from PT100 thermoprobes into a standardized V – mA signal. The converter is provided with galvanic separation between the input and output and can therefore be positioned at a considerable distance if necessary (a few hundred metres) from the sensor without running the risk of obtaining a measurement affected by the differences in potential or the disturbances present in the earthing circuit.
S107P allows a transparent conversion and isolation of RS485/ RS422 serial line into RS232 and viceversa. The RS485 and RS422 interfaces are available on terminals. The RS232 through a cable with DB9 female connector (included). 230V network power supply included into the box.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The S203TA module is a three-phase network analyzer for electric-line voltage up to 600Vac and electric-line current up to the current transformer rated current (50 Hz or 60 Hz). The module has an analog output, electrical value directly proportional to selected input: voltagetype output or current-type output. The electrical value (analog output) is available on screw terminals and the normalized value is available on RS485 registers.
The S203T module is a three-phase network analyzer for electric-line voltage up to 600Vac and electric-line current up to 100mA*CT ratio, tipically up to 100A (50 Hz or 60 Hz). The module has an analog output, electrical value directly proportional to the selected input: voltage-type output or current-type output. The electrical value (analog output) is available on screw terminals and the normalized value is available on RS485 registers.
Models S203TA-D and S203RC-D are a complete three-phase energy analyzers with display, suited for use with up to 600Vac voltage range (without a TV transformer), and max current equal to 5A (without a TA transformer) connected to the inputs. A double serial interface (USB or RS485) it’s also available (Modbus RTU protocol). Analog and digital outputs can be connected to the electrical measure.
Converter for signals in ohm. The instrument converts a resistance signal into a signal in Volt or mA. Used to convert the position signal detected by means of a potentiometer. Selection of input signal from 3 different scale ends - 300, 500 or 1000 ohm - via dip switches on the front panel.
S107USB is an interface able to implement a RS485 serial port by using a PC USB port. The available drivers will recognize the serial interface as a standard serial port; so the use of the product is directly allowed through any software able to communicate with the standard serial ports of the operating system (COM1, COM2, etc). RS485 and USB ports are isolated from each other at 1500 V.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
MODULAR CONVERTERS FOR ELECTRIC READINGS
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
R-16DI-8DO is a mixed digital module with dual Ethernet ports 10/100 Mbps and programming Micro USB front port. The instrument is designed for flexible wiring needs, reduced installation spaces, high density I / O applications with networking Integrated Ethernet. R-16DI-8DO counts 16 PNP / NPN digital inputs also configurable as totalizers @ 32 bits and 8 digital relay outputs with maximum range 30 V / 1 A. All totalizers are stored in non-volatile memory (FeRAM). The module is equipped with isolation between inputs, outputs and remaining low voltage circuits equal to 1.500 Vac. The configuration can take place via Seneca Studio software and web server with support HTML5. IP address and firmware version associated with the single module can be identified on a LAN via Seneca Studio. R-16DI-8DO supports both ModBUS TCP-IP and serial communication RS485 with ModBUS RTU protocol.
The Z203-1 module is a single-phase electric-line analyzer for line voltage up to 500 Vac and line current up to 5A (35 Hz to 75 Hz). The module has an analogue output, electrical value directly proportional to selected input: voltage-type out or current-type out. The electrical value (output) is available on screw terminals and the normalized value is available on RS485 registers. A digital output is available, too, to generate a number of pulses depending on the energy increment.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-D-OUT is 5 SPST relay output module with common line, capacity 5 A – 250 Vac resistive, 2 A inductive. The module has removable terminals with section of 2.5 mm2. Z-D-OUT offers possibility of setting relay safety status at start-up or without communication. Also the module allows safety time setting from 0,5 to 2,5 s. RS485 serial communication supports Modbus-Rtu protocol, maximum 32 nodes. Max 3-way isolation module is 1.500Vac.
The Z-10-D-IN module acquires 10 single-ended digital signals, then converts them to a digital format (IN 1-10 state). The supported communication protocol is Modbus RTU. The following counters are available: All 10 counters are in 32 bits format (backupped on a Not volatile RAM) For all 10 inputs TON/TOFF/Frequency measures are available.
The Z-4AI module acquires up to 4 single-ended input signals (voltage or current type) and it converts them to a digital format (normalized measure).
The ZC-3AO supplies 3 single-ended analog signals (voltage or current type), with two types of communication: CANopen protocol, ModBUS protocol (RS232 serial).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The ZC-SG module allows to manage the load cell signals and to process the weight value, with two types of communication: CANopen protocol, ModBUS protocol (RS232 serial).
The Z-8TC module acquires up to 8 single-ended signals (voltage-type, from the: signal generator or thermocouple) and it converts them to a digital format (normalized measure), with two types of communication: CANopen protocol, ModBUS protocol (RS232 serial).
The ZC-8AI module acquires up to 8 single-ended input signals (voltage or current type) and it converts them to a digital format (normalized measure), with two types of communication: CANopen protocol, ModBUS protocol (RS232 serial).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Z-10-D-OUT is used to drive N.10 MOSFETS from all of the control systems which are able to communicate with the transmission protocol MODBUS RTU through the RS485 serial interface. The digital output max load is 0,5 A (inductive) and 0,5 A (resistive) with maximum switch-on / switch-off cycle frequency of 2 cycles/ second. The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Models ZE-4DI-2AI-2DO / ZE-2AI / Z-4DI-2AI-2DO are multi protocol and Mixed I/O modules. All models have a double RS485 serial port for Modbus RTU protocol, the ZE models support also the Modbus TCP-IP protocol by the Ethernet 10-100 Mbit port. The USB port can be used also with communication port supporting the Modbus RTU protocol. NR 2 independent analog inputs are available in all models (configuring into 0-30V or 0-20 mA), 4 digital inputs, NR 4 32 bits totalizers, NR 4 32 bits counters and NR 2 digital relays outputs are also available for models ZE-4DI-2AI-2DO and Z-4DI-2AI-2DO.
Z-D-IO has N.6 digital inputs, N.2 SPST relays, capacity of 2Aac, 250 Vac. It can be used as simple Input/Output module or, through dip-switches, is possible to acticate special functions to drive motors, pneumatic and motorised valves.The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
This serie of products allows to integrate a CAN network with an Ethernet net. On Ethernet side, it is possible to use Modbus TCP protocol or generic Ethernet communication. The HD67644 is a CAN / Ethernet Converter and it allows you to connect some CAN devices with an Ethernet net (for example a PC, Supervisory System...) in order to exchange the informations between the networks.
Z-D-IN is 5 digital inputs with self-powered 16 Vdc shared negative pole. The module has removable terminals with section of 2.5 mm2. Input channel are protected by 600 W/ms TVS transient current suppressers. Z-D-IN input channels have 100 Hz 16 bit counters, with settable filter. It’s also possible to set the input as fast totalizer with 32 bit, max frequency 10 kHz. RS485 serial communication supports Modbus-Rtu protocol, maximum 32 nodes. Max 3-way isolation module is 1.500Vac.
Z-PC line is a complete line of I/O modules with CANopen standard interface that does not require any couplers, controllers, or repeaters. All modules have an integrated interface with CANopen communication, speeds up to 1 Mbps, and they are ideal for acquisition and control signals for system and machines where the distance between signals plays a key role. Z-PC line CANopen modules can be integrated with third parts configurators and master controllers / network managers, even on board existing machines and installations.
The ZC-24DI module acquires 24 single-ended digital signals, it converts them to a digital format (IN 1-24 state) and it counts the input-pulse number (pulse counter for IN 1-8).
The Z-3AO module supplies 3 single-ended analog signals (voltage or current type).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
Acquires 16 single-ended digital signals, it converts them to a digital format (IN 1-16 state) and it counts the input-pulse number (pulse counter for IN 1-8). Controls 8 digital outputs (OUT1-OUT8), each of them (by MOSFET) actives/deactivates a output load. Z-PC line is a complete line of I/O modules with CANopen standard interface that does not require any couplers, controllers, or repeaters. All modules have an integrated interface with CANopen communication, speeds up to 1 Mbps, and they are ideal for acquisition and control signals for system and machines where the distance between signals plays a key role. Z-PC line CANopen modules can be integrated with third parts configurators and master controllers / network managers, even on board existing machines and installations.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The ZC-4RTD module acquires up to 4 RTD signals (through 4 inputs regardless and isolated with each other) e it converts them to a temperature or resistance measure, with two types of communication: CANopen protocol, ModBUS protocol (RS232 serial).
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The Datalogger Modbus series HD67324-B2 is used for recording data in a line Modbus, up to 2GB. The datalogger is operating in stand-alone , can be connected to Master Modbus , or in the Modbus Slave , via a RS485 or RS232. The data acquired from the device can be downloaded through a USB port .
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
To monitor the status of the optical fiber network, the devices have an auto-diagnostic system that allows to check the status of the network and find eventual failures. With our simple software, it is possible to find all the devices in the optical fiber network and draw a simple scheme of the system. It is possible to check the status of the devices over specific diagnostic Modbus registers too. It is possible to add to the converters of the HD67701 and HD67702 series an I/O expansion that allows to transmit over optical fiber some I/O signals. This module can have up to 4 DI and 4 DO. The innovation of this system is the possibility to create a map of the I/O, so the possibility to activate/deactivate more DO with the same DI.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The HD67153 is a CANopen/ DeviceNet Master Converter and it allows you to connect some DeviceNet slave with a CANopen network in order to exchange the informations between the networks. It is a DeviceNet Slave / CANopen Converter and it allows you to connect a DeviceNet net (for example an Allen-Bradley PLC..) with a CANopen network in order to exchange the informations between the networks.
The HD67153 is a CANopen/ DeviceNet Master Converter and it allows you to connect some DeviceNet slave with a CANopen network in order to exchange the informations between the networks. It is a DeviceNet Slave / CANopen Converter and it allows you to connect a DeviceNet net (for example an Allen-Bradley PLC..) with a CANopen network in order to exchange the informations between the networks.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
This series of products allows to integrate an OPC UA network with a Serial network. The HD67B08 is an OPC UA Client / Serial Converter and it allows you to read/write the data from one or more OPC UA Servers using Serial devices (like PLC, PC etc). The HD67B26 is an OPC UA Server / Serial Converter and it allows you to read/write the data from one or more Serial devices (like barcode scanners, printers, RFID, weight scales etc) using one or more OPC UA Clients.The OPC UA communication can be encrypted, ensuring a SECURE and SAFETY communication.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation of cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust, and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sectors, and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
These converters are contained in a metal housing, so it is STRONG and RESISTANT to the vibrations and shocks. The electrical parts are with triple isolation of 4000 V between Ethernet/Serial - Ethernet/Power Supply - Serial/Power Supply. Particularly suitable for the installation on cars, trains, boats, industrial sector and in fragile environments. Two versions, one with Varnished PCB and one with Resined PCB. Varnished treatment gives dust and humidity protection, Resined treatment gives high water, dust and vibrations protection. Excellent range of temperature resistance from -40 C to +105 C, features required by AUTOMOTIVE applications.
The shelter is constructed as a fully insulated sandwich construction with stainless steel (316) inner and outer sheeting, making it suitable for corrosive and cold ambient conditions. The shelter is provided with a heating & ventilation system and can optionally be fitted with a full HVAC system. The complete shelter is designed, fabricated, and tested in-house as an integrated system. With this approach, site installation work is reduced to a minimum.
The design of the analyzer shelter must consider many factors. Local ambient conditions, hazardous area classification, sample type, analyzer type together with client specifications, will all influence the final design and content of the shelter.
AXIS Solutions Limited manufactures the analyzer shelter using the highest quality materials. We have included all the features that would provide controlled environment protection for adverse conditions. Our analyzer house is easy to use and main. It undergoes several tests to ensure supreme quality.
GAS was historically used as a system to monitor flue gas for Oxygen (O2), Carbon Monoxide (CO) and Carbon Dioxide (CO2), Sulfur Dioxide (SO2), Oxides of nitrogen (NOx), to provide information for combustion control in 2 industrial norms. They are currently used as a means to comply with local air emission standards. Facilities employ the use of GAS to continuously collect records and report the required emissions data.
The standard GA system consists of a sample probe, filter, sample line, gas conditioning system including a sample gas pump, sample gas cooler, calibration gas system, and a series of gas analyzers that reflect the parameters being monitored. Typically monitored emissions include sulfur dioxide, nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen chloride, oxygen.
AXIS has experience in the design and manufacturing of Gas Conditioning Systems, mainly for GAS. Our skilled organization is managing the whole project from design to commissioning and after-sales services. Our references are Chemical plants, Power plants, Petrochemical, Food industry, and many others. High-quality operation conforms to ISO9001 Quality Management System Standard.
These systems must be professionally designed and the components employed in the systems should be specifically built for demanding applications.
AXIS’s success and growth in this highly competitive market have depended on one credo “DO NOT COMPROMISE”. The challenge for us is to continually improve the range of our products specifically designed for sample conditioning systems.
With more than a decade of experience as the best CEMS Supplier, we design advanced and well-engineered equipment. We ensure reliable operations at a low cost. We supply a range of analyzers that are excellent to use aid diverse industrial operations to meet the highest security and safety.
As a mandatory requirement by the statutory body to use HVAC along with Shelters to make the Shelters installable for given area classification. The basic requirements for any HVAC are to perform according to a given parameter with trouble-free operations. These are mainly remote locations or at very challenging locations or experiencing extreme weather conditions. AXIS brings you explosion-proof equipment to meet diverse and exacting demand, which runs trouble-free for 24 X 7 in Oil & Gas Refinery and Petrochemical industry for conditioning of air.
Purging and pressurizing systems is one of the most versatile explosion protection methods. These Systems are based on the principle that in Zone 1 or 2 the gas mixture in the ambient atmosphere, which may ignite under certain circumstances, is removed from the housing by an initial Purge process. After the purge phase, sufficient compressed air or inert gas is supplied to compensate for leaks from the enclosure. This permanent overpressure, achieved using compressed air or inert gas, prevents any potentially explosive atmosphere in the ambient air from entering the enclosure.
During the rapid exchange purge phase, an internal pressure of approximately 3.5 - 12 mbar (1.3” to 5.0” Water Column) is achieved. During operation, this internal pressure reaches 0.6 - 3 mbar (0.3 to 1.2” Water Column).
The pressurizing system is particularly suitable for installed equipment which is not approved for use in hazardous areas. Once installed in a purge panel, it can then be used directly in the hazardous area.
In any Power plant running on steam, the purity of boiler feed water and steam is absolutely crucial; especially to steam turbine, steam boiler, superheater, condenser, and other steam equipment. To prevent damage to a steam turbine, steam boiler, and other equipment due to scaling and corrosion, on-line steam and water analysis of critical parameters such as pH, Conductivity, Dissolved Oxygen, Silica, Sodium, Hydrazine and Phosphate, etc is a must. Steam can be as hot as 560°C. Pressures can be as high as 250 bar. To keep the power plant up and running with minimum erosion and corrosion of the steam turbine, steam boiler, and condenser, we have developed a fully integrated Steam and Water Analysis System (SWAS) that provides exact, precise measurements on all these critical parameters. Samples are at high temperature & pressure. Sample conditioning is required to bring down the temperature & pressure at the desired level.
AXIS has designed the SWAS –Steam and Water Analysis System to keep you in power.
Axis Solutions Limited is well-known for the supply of excellent Steam and Water Analysis System (SWAS). Our products ensure the durability of your steam applications. We utilize modern technologies and proven techniques to manufacture quality equipment that meets all the quality standards.
WHAT IS PASSIVE COOLING???
Passive cooling technology is a building design approach that creates indoor thermal comfort without energy consumption.
The environmental conditions are useful to generate indoor thermal comfort.
In the desert area where night and day temperature difference is more.
Onsite energy will utilize in the cooling process in the passive cooling system.
PRINCIPLE AND WORKING OF PASSIVE COOLING
This passive cooling system consisting of a memory heat unit and two heat exchangers.
The behavior of the system is shown in the below graph when
(MAX & MIN Ambient Temperature day/night = 55/30°C)
The Electrical House (also known as “E-House” or “Integrated Power Assembly”) is a prefabricated walk-in modular enclosure to house medium and low voltage switchgear as well as auxiliary equipment such as UPS, Communication Panel, Data Storage Devices, Power Quality, and Data Communication System.
AXIS offers the industry’s most complete family of electrical distribution, control equipment, and components. E-Houses are the optimal approach to install electrical power, communication, and control equipment for a fast and reliable power supply. An E-House is a pre-fabricated electrical building, fully equipped with products from our comprehensive portfolio of medium-voltage switchgear, low voltage switchboards, busbar trunking systems, and auxiliary equipment. It is completely developed, manufactured, assembled, and pre-tested at the factory, then connected and put into operation on site. If size allows, the E-House is shipped fully-assembled as a single unit. Larger E-Houses are split into individual sections for shipping and joining on site.
AXIS Solutions Limited is the manufactures and supplies fully optimized and engineered e-houses. We are a technology-driven and innovative supplier of quality products. Being a reputed e-house manufacturer and the industry leader, we supply products that provide you better control, efficiency, safety and security.
The Electrical House (also known as “E-House” or “Integrated Power Assembly”) is a prefabricated walk-in modular enclosure to house medium and low voltage switchgear as well as auxiliary equipment such as UPS, Communication Panel, Data Storage Devices, Power Quality, and Data Communication System.
AXIS offers the industry’s most complete family of electrical distribution, control equipment, and components.
E-Houses are the optimal approach to install electrical power, communication, and control equipment for a fast and reliable power supply. An E-House is a pre-fabricated electrical building, fully equipped with products from our comprehensive portfolio of medium-voltage switchgear, low voltage switchboards, busbar trunking systems, and auxiliary equipment. It is completely developed, manufactured, assembled, and pre-tested at the factory, then connected and put into operation on site. If size allows, the E-House is shipped fully-assembled as a single unit. Larger E-Houses are split into individual sections for shipping and joining on site.
E house is perfectly fitted with low-and medium voltage switchgear, variable frequency drives, dry-type transformers, control and protection panel boards, SCADA and energy automation systems, relay panels, and busbar trunking systems from our comprehensive portfolio. Additionally, E-Houses are often equipped with batteries, instrumentation, uninterrupted power supply (UPS), and a wide range of auxiliary equipment, Communication Panel, Data Storage Devices, Power Quality, and Data Communication System.
The industry needs a reliable and efficient power supply as well as flexible solutions that can be adapted to individual requirements. E-Houses are fast and easy to install and can be used as an interim solution. They are easy to upgrade and use available space optimally. This makes them the most suitable option for a broad range of applications: in restricted spaces, as temporary power supply, or for distribution grid extension.
Refer typical diagram of ASPL Aspiration System specially designed for prevention moisture from the sample and measuring proper reading of sample for the analysis. In the system sample is taken from source to gas detector, sample is transferred from long distance with help of Eductor. Instrument air is also given through the Air filter regulator for analysis purpose. On another hand sample is also taken for calibration purpose. Axis Aspiration system is providing manual and auto calibration. For manual calibration detector close the non-return valve and ball valve shall be turned into calibration side.
Refer typical diagram of ASPL Auto change over unit where filled cylinders in Bank- A and Bank- B connected to inlet of Auto change over regulator. In first stage regulator of auto changeover unit fixed amount of gas pressure will be controlled and in second stage means line regulator will be adjusted with knob to achieve desire system pressure of gas. This two-stage pressure regulation shrinks the supply pressure effect caused by depleting gas cylinders. During operation when Gas supply Bank-A pressure reduced to Predefined level then it will auto changeover to Bank-B to continue supply of gas. Empty cylinders of Bank-A can be taken for refilling.
The Zirconia Oxygen Analyzer is used to monitor and control the oxygen concentration in combustion gases, in boilers and industrial furnaces, for wide application in industries which consume considerable energy–such as steel, electric power, oil and petrochemical, ceramics, paper and pulp, food, or textiles, as well as incinerators and medium/small boilers. It can help conserve energy in these industries. It also contributes to the preservation of the earth’s environment in preventing global warming and air pollution by controlling complete combustion to reduce CO2, SOx, and NOx. Axis is providing system solutions for high availability, reliable, accurate with sampling system design where analytical measurement demands it. The Axis Zirconia Analyzer calibration unit is designed for the calibration process which is available with a fully automatic & manual option. Choose the detector version which best suits your needs so that an optimal combustion control system can be obtained. The system configuration can be classified into below basic patterns as follows: SYSTEM 1 (MANUAL CALIBRATION UNIT) SYSTEM 2 (AUTO CALIBRATION UNIT)
Each Sampling System will be equipped with cylinder valves for controlling flow, venting & isolating the system from the process. End connections could be flanged or as per end-user/customer requirements. Each sampling system will have a flexible connection for the sample cylinder outlet and a fixed connection for the sample cylinder inlet Quick Disconnect connections shall be used and shall be capable enough of self-sealing with the ability to withstand at least (internal Pressure Range ) internal pressure when disconnected from the cylinder. The system will include bypass flow for cylinder and depressurizing the system before cylinder removal. The system shall include provisions for securely holding the sample cylinder during sampling. The system shall bear a label indicating the maximum allowable operating pressure and temperature High sample integrity – One or two process connections – easy to install and minimum potential leak points Safe design, requiring minimum operator time and training
ASPL Double block and bleed is a special design to ensures that cross-stream contamination does not occur in multi-stream sample systems which are caused due to is leakages from switching valves and areas of unpurged tubing common to more than one stream. As can be seen below diagram this design allows sample flow from the selected stream to pass through two valves enroot to the sample/calibration valve. The other streams are double blocked with two valves and leakages from valves at low pressure to escape out the bleed vent. Hence here the purpose is now served by double block and bleeds valve, firstly it will prevent contamination in all the streams and remove the trap gas/ liquid by means of the given bleed vent/drain. The solution can be provided for gases and liquid applications. In case of liquid contamination shall be connected to drain. Switching valves shall be provided Electric operated solenoid valve or air operated valve. Multi-stream sample selection and calibration switching command shall be given by the analyzer unit/control unit. Sample fine filter and rotameters can be added to make it a complete sample system as per customer-specific requirements. This improves the reliability of the system where precise measurement is highly required.
The Axis Fast loop sampling system (FLS) is designed for increased accuracy and reduced uncertainty and maintenance costs. Because it is important to maintain flow through the fast loop system even when the analyzer is not in service. A fast loop system is designed to handle high flows in sample transport lines to reduce time delays for online analyzer systems. A fast loop system passes a sample through a filter while using the high flow rate of the bypass to keep the filter element clean. Fast loop filter works as a self-cleaning filtration. Axis is providing system solutions for high availability, reliability, and accuracy with sampling system design where analytical measurement demands it.
Liquid Sample Recovery Systems are designed specifically to collect process liquid effluent or spent sample from analyzers and return the same to the process line, or any other suitable location in a fully controlled manner. This system is ideal for use in applications where it is undesirable to discharge chemicals or hydrocarbons into sewage drains. Analyzers have limitation in pressure and temperature, so the spent sample cannot be returned to the process line from which it was taken. A consequence of this is that a sample collection system has to be installed which collects the sample. The liquid sample recovery system allows natural or pressure draining from the analyzer into the atmospheric recovery tank. This collected sample is returned to the process using pumps. By using these special collection vessels, the user spares the environment, avoids hazardous situations, creates a stable outlet condition for the analyzers and, by recovering spent samples, costly product is not lost but can be reprocessed. The system is designed per process return requirements. The size, shape and MOC of vessel is customized to customer requirement. A standard sample recovery system includes a base frame, recovery tank, Level Indicator/Transmitter with option of high and low alarm level indications, positive displacement pumps, relief valves The motor is driven by a locally installed Electrical Control panel with emergency push buttons and selector switch for local / remote control selection for pump start/stop. The remote selection can be customized. When high level detected pump starts to return sample to process. Pump running stop when low level detected. High high and low low level trip contacts provided for system trip.
Axis single-line SWAS systems are pre-tubed assemblies used to simplify the conditioning of steam, water, or non-hazardous process samples. With the addition of cooling water, safe and representative samples can be obtained from individual sampling sites that are remotely located throughout the plant or from a small number of samples in a central location. There are two versions of Axis single-line SWAS systems — one for grab samples only and the other for both grab samples and to condition the sample for online analysis. These two versions are available for four types of the stream. 1) HPHT 2) HPLT 3) LPLT 4) LPHT. Axis single-line panels can be mounted on a variety of walls and come with full-width workable sinks and pre-piped cooling water headers to reduce installation time and cost. Whether an individual single-line sample mounting plates solutions are completely engineered to meet the application requirement
The Axis validation system is easy to use to validate online analyzers. Pressurized Process sample can be taken in the validation tank then get it certified with refinery lab or certified sample can be filled in the validation tank. Then certified sample can be passed through analyzer using pump or piston arrangement for validation of analyzer system. Axis is providing system solutions for high availability, reliable, accurate with sampling system design where analytical measurement demands it.
The WATCHDOG is an advanced Trace or Percent Oxygen Analyzer designed to include all the essential features and deliver a high level of accuracy and reliability for sheltered installations in Class 1, Div. 2 areas at a lower price point.
The AMI model 2001LC is the ideal solution for measuring trace oxygen in a wide range of applications in a general-purpose environment. In a small size, and at a very low cost, it provides a complete electronic package and sample system using AMI’s patented cell block technology.
The AMI model 2001RS is the ideal solution for measuring trace oxygen in a wide range of applications in a general-purpose environment. In a compact size, and at a low cost, it provides a comprehensive electronic package and sample system using AMI’s patented cell block technology. In addition, the 2001RS uses internal surface mount solenoid valves for sample/span gas selection and to seal off the sensor in the event of loss of power. Unlike competitive analyzers, AMI sensor replacement requires minimal downtime due to the front panel sensor access and the patented AMI cell block. The typical time from one-minute air exposure to 10ppm is under 15 minutes. Trace oxygen analyzers are essentially leak detectors. AMI’s patented cell block allows the analyzer to be built with almost no possibility of internal leaking, with minimal volume and with front-panel sensor access.
The MODEL 2010BX is AMI’s most advanced Trace Oxygen Analyzer. This neXt generation unit combines patented technologies and superior design to deliver unsurpassed performance and reliability while keeping costs low. The MODEL 2010BX is the #1 choice among engineers and measurement technicians.
The AMI model 2001RS is the ideal solution for measuring trace oxygen in a wide range of applications in a general-purpose environment. In a compact size, and at a low cost, it provides a comprehensive electronic package and sample system using AMI’s patented cell block technology. In addition, the 2001RS uses internal surface mount solenoid valves for sample/span gas selection and to seal off the sensor in the event of loss of power. Unlike competitive analyzers, AMI sensor replacement requires minimal downtime due to the front panel sensor access and the patented AMI cell block. The typical time from one-minute air exposure to 10ppm is under 15 minutes.
The MODEL 3010BX is AMI’s neXt generation Trace H2S Analyzer. Its patented technologies and superior design make the Analyzer the top pick among engineers and measurement technicians seeking reliable and accurate H2S measurements in harsh conditions.
The MODEL 3000RS Portable H2S Analyzer is the perfect choice for safely and accurately measuring ppm levels of H2S in the natural gas industry. Exclusive innovations and distinctive features are designed into a compact and rugged package. Our patented Cell Block and high-performance sensor produce a safe, fast, and reliable H2S measurement in harsh applications. All AMI portables are outfitted with a data logging feature that serves as a useful tool when spot-checking multiple sites per day.
Our high-quality pump uses a unique diaphragm that diffuses less than 0.5ppm of oxygen while drawing from pressures as low as 14” Hg. It pushes the sample gas through the trace oxygen analyzer allowing the sensor to operate at atmospheric pressure. Electrochemical oxygen sensors must operate at or very close to atmospheric pressure for accurate operation. Prior sample pump technologies used various types of diaphragm materials, which either allowed too much oxygen to diffuse or alternatively developed small leaks allowing air to be drawn into the system.
Our high-quality pump uses a unique diaphragm that diffuses less than 0.5ppm of oxygen while drawing from pressures as low as 14” Hg. It pushes the sample gas through the trace oxygen analyzer allowing the sensor to operate at atmospheric pressure. Electrochemical oxygen sensors must operate at or very close to atmospheric pressure for accurate operation. Prior sample pump technologies used various types of diaphragm materials, which either allowed too much oxygen to diffuse or alternatively developed small leaks allowing air to be drawn into the system. In either case, the measured oxygen values would become misleadingly high. The alternative – locating the pump downstream of the analyzer so that it could draw the sample gas through the analyzer - would cause the sensor to operate at varying levels of vacuum determined by the pressure at which the pipeline or application operates, causing erroneously low readings, drift, and sensor damage.
This rugged protective carrying case extends the life of our portable gas analyzers in the most demanding and hazardous environments.
Protecting your Gas Analyzers from harsh pipeline contaminants is essential for a reliable, accurate, maintenance-free installation. Pipeline gas contains varying levels of hot compressor oil vapor, glycol, and water vapors that can condense within critical Gas Analyzers, causing errors or failure. Most competitive solutions require constant maintenance and draining drip pots, coalescing filters, or bypassing significant amounts of gas to drain contaminants. Intermittent slugs of liquid getting pushed through the pipeline also result in expensive Analyzer repairs. AMI’s DEMISTER and LRP combo solves these issues, for maintenance-free reliability.
This unique high pressure, non-diffusive sample gas tubing is outfitted with special connection fittings. Designed with an oring/ swage seal and requiring only finger tightening, the tubing and fittings are rated up to 6,500psig. It continues to provide a leak-tight seal even after thousands of connections without causing damage to the female portion of the compression fittings, generally attached to the expensive gas analyzers.
Protecting your Gas Analyzers from harsh pipeline contaminants is essential for a reliable, accurate, maintenance-free installation. Pipeline gas contains varying levels of hot compressor oil vapor, glycol, and water vapors that can condense within critical Gas Analyzers, causing errors or failure. Most competitive solutions require constant maintenance and draining drip pots, coalescing filters, or bypassing significant amounts of gas to drain contaminants. Intermittent slugs of liquid getting pushed through the pipeline also result in expensive Analyzer repairs. AMI’s DEMISTER and LRP combo solves these issues, for maintenance-free reliability.
NEMA 4X Enclosure allows for our heated Model 210BR, 2010BR, and 3010BR to be quickly and easily mounted in place for use in extreme cold, wet and windy weather conditions down to -40° F.
The BARRACUDA MODEL 4010BR TDL Moisture Analyzer has significantly raised the bar for measuring water vapor in a natural gas stream. AMI has engineered the most reliable, accurate, compact moisture analyzer and packed it with a full suite of desirable features. Utilizing a unique patent-pending laser wavelength and cell block technology, the BARRACUDA has quickly become the standard in the natural gas industry.
Axis Vortex Cooler VC2 are designed to deliver continuous cold air to industrial panel to avoid overheating the system. Axis Vortex Tube VT1 are designed to deliver cooling of cutting tools (lathes and mills, both manually-operated and CNC machines) during machining. for challenging environment recommended to use VC2. It is mainly used where electricity resources is a challenge. It is fully mechanical device hence very less maintenance is required. Used in Oil and Gas refinery, power, chemical, pharmaceutical industries, product chilling machine, industrial PC cooling as well as machine control panel. Many features of the VC2 & VT1 make it ideal for wide range of applications for air cooling. It has main advantage is that it prevents dust and ingress protection of cabinet / panel / Machine hence eliminates down time of the system or machine. Basically it works on vortex tube principle , the hot air produced by the hot end the vortex tube and cold air released at opposite end and enters where cooling is required. hot air released to the atmosphere via vent entry of VC2 & VT1.
Axis Peltier Air conditioning unit - PAC1 and PAC2 is designed to deliver continuous cooling to industrial panel to avoid overheating the system. It is mainly used where refrigeration based (compressor based) resources is a challenge. It is fully mechanical device hence very less maintenance is required. Used in all type of process industries where small panel / enclosure or switching cabinet want to cool. Many features of the PAC1 and PAC2 make it ideal for wide range of cooling application. Basically it works on Peltier Effect; Peltier blocks are used with electronic circuit. PAC1 and PAC2 can work in the most adverse environment conditions. They are suited for working in high ambient temperatures or heavily polluted ambient air. The warm air inside the switching cabinet is blown into the cold exchanger by a fan and thereby cooled. There are not refrigerant and thus no danger of leakage. In addition, our switching cabinet coolers can therefore be used in moving or accelerating systems
The basic requirements for any Air Conditioning Unit is to perform according to given parameter with trouble free operations. These are at mainly remote locations or at very challenging locations or experiencing extreme weather conditions. AXIS brings you the equipment to meet diverse and exacting demand which runs trouble free for 24x7 in Power generation sector, Chemical Plants, Steel Plants, Process Automations, Porta Cabins, Drive Panels, PLC Panels, Instruments Panels, Textile Machine Panels, Food Processing machinery etc.
The Best Panel AC to Purchase in India
We supply reliable and the best panel AC suitable for various industries. Our products have great reach and very popular across pharmaceutical, food processing, engineering and manufacturing industries. Low maintenance cost and high durability are the top features of our products. today for the best panel AC at an affordable cost.
Is a mandatory requirement by the statutory body to use HVAC along with Shelters to make the Shelters installable for a given area classification. The basic requirement for any HVAC is to perform according to a given parameter with trouble-free operations. These are mainly remote locations or very challenging locations or experiencing extreme weather conditions. AXIS brings you explosion-proof equipment to meet diverse and exacting demands which runs trouble-free 24 X 7 in the Oil & Gas Refinery and Petrochemical industry for conditioning of air.
Axis make chiller unit is capable to lower the sample temperature for the sample analysis for analyzer and trouble-free operation. Chilled water to be flow through external heat exchanger (shell & tube type) and the same will maintain the sample temperature to be analysis. This chiller fulfils the requirement where requirement of special cooling or cooling water utility is not available at site. Chiller can be supplied in various ranges of cooling capacity as per the requirement. It can be supplied for single to multi analyzers in a single house. The basic requirements for any Chiller units are to perform according to given parameter with trouble free operations. Specifically design for sample cooling application. Depending on flow rate, different circulating pump capacities are optionally available. Axis brings you the safe area / Hazardous Area Chiller Unit to meetdiverse and exacting demand which runs trouble free for 24 x 7 days in Power Plant, Refinery and Petrochemical Industries for cooling the sample to be analyzed
The basic requirement for any Air Conditioning units is to perform according to given parameter with trouble free operations. Specifically design for control Panel application. These are mainly used at remote locations or at very challenging locations or experiencing extreme weather conditions AXIS brings you the Explosion proof or Safe area Split Air Conditioner to meet diverse and exacting demand which runs trouble free for 24x7 in Oil, Gas, Refinery and Petrochemical industries for conditioning of air.
The basic requirement for any Air Conditioning units is to perform according to given parameter with trouble free operations. Specifically design for control Panel application. These are mainly used at remote locations or at very challenging locations or experiencing extreme weather conditions. AXIS brings you the Explosion proof or Safe area Air Conditioner to meet diverse and exacting demand which runs trouble free for 24x7 in Oil, Gas, Refinery and Petrochemical industries for conditioning of air.
The Leading Suppliers of Explosion Proof AC
AXIS Solutions Limited is the leading manufacturer and supplier of explosion proof AC. Since our inception a decade ago, we have shipped thousands of severe duty and explosion-proof applications to various parts of the world. Our commitment to quality and excellence has helped to win the trust and confidence of several renowned brands.
The system is based on an 8-bit microcontroller. It is to be used for selecting one of the EIGHT streams by SYNC. The pulse from Analyzer if the trigger mode is Pulse. Stream selection will be according to preprogrammed timings if the trigger mode selected is TIME. With the help of a keypad and display on the front, the system allows to set and modify the following parameters of each stream In pulse mode, the system allows to skip/Inskip specified stream and in time mode if the value of Stream On time is programmed as zero, it is skipped. When the system is put in RUN mode, through the front keypad, the sequence is executed. The relay contacts are switched ON and OFF as per the predefined sequence. The Powered contacts will be used to switch the ON and OFF Solenoid Valves fitted in the system. Potential free contacts for each relay are provided for remote status indication. Alarm relays are also switched On and Off as per the input from the analyzer. Analog input is continuously sampled. The value of analog input is continuously displayed in RUN mode. When the PAGE key is pressed, Latched value for each stream is displayed for streams 1 to 6 respectively. Analog output for each stream is updated after its sampling & analysis are completed.
AXIS Strainers are a means of protecting downstream mechanical components such as Gauges, Analyzers, Flowmeters, and Back pressure regulators from possible damage due to debris such as rust, pipe scale, sediment, and/or other solid particulates. Machined seats in both body caps align and lock the screen in place to stop sediment bypass. Mesh construction ensures the best performance and its right area as well as additional strength of the body of the removable plug to increase life and reliability while opening and closing the plug
The Sample Cooler is a compact unit specially designed as per American Society of Mechanical Engineers (ASME) Standard and recommendations to handle high pressure and high temperature applications. This is the most efficient and cost effective sample cooler. The SS 316 (Optional Inconel) sample coil is single continuous length without any Joint. The shell is SS 304 (Optional SS 316 and Inconel) complete including the mounting bolts and bracket. The shell is removable type for inspection and cleaning Purpose without disconnecting sample line. Sample Cooler is used to take samples of gas, water or steam from boilers at high temperature and pressure. The cooling water injected from the bottom of the shell will counter the flow of sample directing from the top, condenses the sample, and cool hot fluids efficiently to enable safe sampling.
AXIS sight flow indicators provide a quick, reliable and economical way to verify fluid flows through industrial process lines. They are mainly used to check for the presence of flowing liquid where there is intermittent flow, partially filled lines, or entrained air. It is designed such that there is minimal pressure drop at the component. SS standard material ensures high reliability of the system & also ensures that equipment is designed to avoid any clogging at the component.
Authentic and long-term operation of SWAS depends upon the efficiency of sample conditioning components for which accurate pressure and flow control is most essential. Main application of this product is chemical analysis of water and steam samples in modern Power Generation Plants. Axis offers very reliable product for system designer where high pressure reduction with flow control is a major challenge. The flexible needle-in-chamber type design permits for adjustable pressure drop and flow control including ease of cleanliness. Both of these features provide long life of sample conditioning parts. This reducer is specially designed for high pressure sample persisting above 35 bar and up to 350 bar. It develops fixed pressure drop and its adjustable using a knob on top The APRV1 consists of two needles joined to a large chamber. This assembly provides precise insertion. The high pressure steam enters into APRV1, flow passes through one needle then turns towards the other needle and then out. Pressure drop is proportionate to set pressure and till what extent a needle is inserted inside a chamber.
AXIS represents numerous types of components covered in a single manifold. manifold is designed for Steam and Water Analysis System (SWAS) applications. The manifold features a horizontal body design. Manifold connections include NPT female thread. The flow of sample through an AXIS manifold is controlled by filtering the sample, over temperature protection, process chamber, measuring the temperature and pressure, and maintaining the back pressure by this Miniature Header. Each component has a specific function to maintain the back pressure and protection over high sample temperatures.
In Power industry, it is very critical to measure the conductivity accurately. The real conductivity measurements are affected by the treatment chemicals. So it is very important to remove the masking effects of these chemicals. AXIS Cation Columns are the best solution for it. The conductivity measured after cation column will be real, accurate and reliable. Slim design ensures removal of dead volume due to high velocity. End fittings make sure that there is no liquid dead volume present in the column so no plug flow and reduces channeling effect.
AXIS Solutions Limited provides the best cation column required for the power industry. Buy our equipment for real and accurate conductivity measurements. Low cost, easy operation and zero maintenance cost of our product have won the trust and confidence of thousands of our customers across the world.
Definitive for extended operation of SWAS depends upon the principle of sample conditioning components for which accurate pressure flow and temperature control is most essential. Excessively hot samples can cause damage to expensive and sensitive sample conditioning components of the process analyzer. The auto shutoff valve is widely used in Steam Water Analysis Systems ( SWAS ) in power plants. The AXIS provides a very reliable Auto shut-off valve also called ASV1.This is functioning directly exposed to the sample media via the thermal expansion principle using wetted media. ASV1 is a self-reliant, fully mechanical device that required no external source of electricity or pneumatic or hydraulic. It is developed to sustend the sample temperature up to 50°C ± 2°C. After shutting off ASV1, it must be reopened by pressing the manual reset button which ensures the no flow resumes and the safety of the upset component has been amended. The AXIS ASV1 is constructed with SS 316 and other wetted parts are compatible with boiler water and steam. ASV1 is mainly used downstream of the pressure-reducing component and upstream of analyzers, flow meters, and other low-pressure devices. After shutting off the upstream side of the ASV1 will be opened to the full source pressure.
AXIS Solutions Limited manufacturers and suppliers the best quality thermal shut-off valve for various industrial applications. Our equipment helps to improve the working efficiency of your plant and helps you bring down operational and maintenance costs. The AXIS offers a very reliable Auto shut-off valve called ASV1. This is functioning directly exposed to the sample media via thermal expansion principle with using wetted media. ASV1 is a self–reliant, fully mechanical device that required no external source of electricity or pneumatic or hydraulic. The AXIS ASV1 build with 50°C ± 2°C set to shut off temperature. After shutting off ASV1, it must be reopened by pressing the manual reset button which ensures the no-flow resumes and safety of the upset component have been amended.
Axis Relief Valve RV1 is designed to deliver continuous Uni-directional flow control to further system and provide Uni-direction safety at predefined level. It is mainly used in instrumentation sample handling system for all type of Gas media application (Specially for Hydrogen). Used in Oil and Gas, Refinery, power, chemical pharmaceutical, Pulp and any type of process industries. Many features of the RV1 make it ideal for wide range of applications controlling Uni-direction flow control and safety for gas media. It has wide operating range up to 20 bar and up to 220°C media temperature can be sustained
Axis Pressure regulator is designed to deliver continuous & precise control to further system. It is single stage pressure control regulator. It is mainly used in instrumentation sample handling system for all type of Gas media application. Used in Oil and refinery, power, chemical and any type of process industries. Many features of the PRG1 / PRG3 make it ideal for wide range of applications controlling pressures at low to adequate flows in gas media. It has wide operating range up to 300 bar and up to 170°C media temperature can be sustained. PRG3 can also be used for water application.
AXIS Solutions Limited is the renewed supplier of the best pressure regulator for custom applications. We have developed bespoke innovations to meet various and specific requirements of our clients. Our equipment ensures high performance in critical conditions
Axis Non Return Valve is designed to deliver continuous Uni-directional flow control to further system. It is mainly used in instrumentation sample handling system for all type of Gas media application. Used in Oil and Gas refinery, power, chemical pharmaceutical, Pulp and any type of process industries. Many features of the NRV1 make it ideal for wide range of applications controlling Uni-direction flow control for gas media. It has wide operating range up to 413.6 bar and up to 170°C media temperature can be sustained.
Axis Inline Relief Valve IRV1 is designed to deliver continuous Unidirectional flow control to further system and provide Uni-direction safety at predefined level. It is mainly used in instrumentation sample handling system for all type of Gas media application. Used in Oil and Gas refinery, power, chemical pharmaceutical, Pulp and any type of process industries. Many features of the IRV1 make it ideal for wide range of applications controlling Uni-direction flow control and safety for gas media. It has wide operating range up to 10.3 bar and up to 170°C media temperature can be sustained.
Axis Pressure regulator is designed to deliver stable outlet pressure from gas cylinder to further system. It is a dual stage pressure regulator. In first stage of regulation it regulates fixed amount of gas pressure and in second stage pressure can be adjusted with knob to achieve the desired system pressure. It is mainly used in Oil and refinery, power, chemical, any type of process industries and instrumentation sample handling system for all type of Gas media application. Apart from this it is used in critical welding machine process, laser cutting process etc Many features of the PRG2 make it ideal for wide range of application controlling pressures at low to adequate flows in gas media. It has wide operating range up to 300 bar and up to 170°C media temperature can be sustained.
The Back Pressure Regulator maintains constant pressure and constant flow for the analyzer simultaneously protecting critical sampling components as a relief valve. A Back Pressure Regulator is a control valve that maintains a set pressure on the upstream side of the valve. If the pressure increases, the regulator opens to allow additional flow through the BPR1 / BPR2. As the pressure decreases the regulator passes closes to restrict flow. Continuous open outlet port for grab sample assures that fluctuation during opening and closing is avoided. This additional flow through the BPR1 / BPR2 will ensure the avoidance of the requirement of adjustment during the requirement of taking a grab sample as continuous flow is available for the same. A back pressure regulator can be also used for the grab sample purpose. This result in cost benefits avoiding separate tubing and grabbing sample prices. This ensures that velocity is well maintained upstream. Any upstream fluctuation will not allow individual analyzer flows unstable and assures the stability of reading and assured performance of the system
Axis Gas Cylinder Auto change over regulator is designed to deliver continuous flow from gas cylinder to further system or it is used when a stable outlet pressure is required. It is equipped with two stage pressure control regulator. In first stage regulator fixed amount of gas pressure will be controlled and in second stage means line regulator can be adjusted with knob to achieve the desired system pressure. This two stage regulator technique shrinks the supply – pressure effect caused by depleting Gas cylinders.Refer typical application diagram like Gas Supply A & Gas Supply B are connected at inlet of change over unit. During operation when Gas supply A cylinder pressure reduced to predefined level it will changeover to Gas Supply B It is mainly used in analyser or Gas chromatograph systems as a carrier gas cylinder constant flow. Apart from this it can be used where critical welding machine processes & laser cutting processes are carried out.
AXIS Solutions Limited is an Indian company that manufactures and exports auto change over regulator. The company was founded in 1999 with the objective of manufacturing high quality, innovative products for power distribution system. Axis Solutions Limited has had a long successful history of supplying transformers to India's leading industries which include power plants, steel mills, textile mills and more.
In any sample gas conditioning, the sample take-off point is a very challenging part of the process and sample conditioning system. Hence the AXIS sample gas probe SGP1 is specifically designed for this harsh and robust environment with competitive cost. The reliable and long-term operation of any process analyzer depends upon the efficiency of the sample conditioning system for which dust, solid particulate, and moisture-free sample gas is essential. SGP1 is equipped & designed with efficient variable filters by removing aerosols, dust content, and humidity by ensuring the security of the analyzer as well as further sample conditioning system. The main application of SGP1 is to extract the gas for analysis in the Continuous Monitoring and Emissions System. SGP1 ensures easy mounting and installation, safe operation, and trouble-free maintenance The internal filter element can be changed without any tool and disassembling of the sample lines. The complete filter assembly is removed from the probe head side. This makes it simpler to check the filter element & gasket condition. The SGP1 heated probe power supply can be in either 110 VAC or 230 VAC as per customer requirement. There is no temperature control required as a self-regulating heater is present. A separate thermostat is provided for low-temperature monitoring. For Electrical connection to SGP1, a separate Junction box is provided
In any sample gas conditioning, the sample take-off point is a very challenging part of the process and sample conditioning system. Hence the AXIS sample gas probe SGP1-BB is specifically designed for this harsh and robust environment with competitive cost. The reliable and long-term operation of any process analyzer depends upon the efficiency of the sample conditioning system for which dust, solid particulate, and moisture-free sample gas is essential. SGP1-BB is equipped & designed with efficient variable filters by removing aerosols, dust content, and humidity by ensuring the security of the analyzer as well as further sample conditioning system. The main application of SGP1-BB is to extract the gas for analysis in the Continuous Monitoring and Emissions System. SGP1 ensures easy mounting and installation, safe operation, and trouble-free maintenance The internal filter element can be changed without any tool and disassembling of the sample lines. The complete filter assembly is removed from the probe head side. This makes it simpler to check the filter element & gasket condition. The SGP1-BB heated probe power supply can be in either 110 VAC or 230 VAC as per customer requirement. There is no temperature control required as the self-regulating heater is present. The separate thermostat provides for low-temperature monitoring. For electrical connection to SGP1, a separate Junction box is provided
In any sample gas conditioning, the sample take-off point is a very challenging part between processes and the sample conditioning system. Hence the Axis PROBEX sample gas probe is specifically designed for this harsh and robust hazardous environment with competitive cost. The reliable and long-term operation of any process analyzer depends upon the efficiency of the sample conditioning system for which dust, solid particulate, and moisture-free sample gas is essential. PROBEX is equipped & designed with efficient variable filters by removing aerosols, dust content, and humidity by ensuring the security of the analyzer as well as further sample conditioning system. The main application of the sample gas probe is to extract the gas for analysis in the Continuous Monitoring and Emissions System. Axis PROBEX ensures easy mounting and installation, optimum operation, and trouble-free maintenance. Changing the external filter element needs no tools and no disassembly of the sample lines. The complete filter assembly is removed out at the probe head side. This makes it simpler to check the filter element & gasket condition. The PROBEX heated probe power supply can be in any of 110 VAC and 230 VAC. No thermostat or temperature limiters are necessary. For electrical connection provides a separate Flameproof Junction box suitable for operation in Zone 1 & 2 hazardous area provided.
The reliable and long-term operation of any process analyzer depends upon the efficiency of the sample conditioning system for which dust, Solid particulate, and moisture-free sample gas is most essential. Axis AF1 is equipped with an efficient filter to provide dust, solid particulate, and moisture-free sample gas by ensuring the security of the analyzer. It is not a reusable filter. When it is exhausted with severe contamination outlet of the filter will be very less or negligible means no flow at the outlet. If this condition occurs that means it is time to replace Aerosol filter with new one. It is widely used in Gas Analysis Systems (GAS), wastewater incineration plants, biogases plants, ambient monitoring systems, and Cement, Glass, Steel as well as paper industries. It is not recommended to use Aerosol filter for aromatic hydrocarbons means oils and fuels in refinery process gases.
The Axis Universal Safety Scrubber helps to protect analyzers from corrosion due to acidic gas stream components, especially Sulphur Trioxide, Hydrochloric Acid, Sulphuric Acid & Hydrofluoric Acid. The Universal safety scrubber ( USS1 ) can be used in lime-fired boilers, coal-fired boilers, waste incinerators, and many other applications, where SO3, HF, and HCL in certain limits are present. This can also be installed after the cooler which ensures no carryover of acid and increase the life of the downstream components, especially the sample cell. USS1 material condition should be checked to ensure the right result of acid removal. Life depends on factors like the presence of aggressive components, flow rate, and period till the sample passes through the USS1.
The Reliable & long-term operation of any process analyzer depends upon the efficiency of the sample conditioning system for which dust, solid particulate & moisture-free sample gas is most essential. Where dust concentration is a major problem for analyses of gas, the glass wool filter is the best solution. GWF1 is equipped with an efficient filter to provide dust and solid particulate-free sample gas by ensuring the security of the analyzer. The folded construction of the filter & compatibility of the designed filter components like end cap (top & bottom), transparent acrylic body, and glass wool filter materials ensure ease of mounting & trouble-free maintenance.
In a Sample Handling System, the gas stream must be conditioned to provide particulate and moisture-free gas to enter the Analyzer. AXIS Inline Filter provides fine filtration & specifically designed for ease of use, low dead volume, and flexibility. There is a choice of filter elements available to meet the different application parameters that can be used as last-moment filtration to avoid any unremovable substances, solid sharp particles, or final protection devices entering the Analyzer. Application as a Guard filter is also possible as mentioned.
The reliable and long-term operation of any process analyzer depends upon the efficiency of the sample conditioning system for which dust, Solid particulate, and moisture-free sample gas is essential. SGF1 is equipped with an efficient filter to provide dust, solid particulate, and moisture-free sample gas by ensuring the security of the analyzer. The folded construction of the filter and compatibility of the design filter components like filter top, filter element, and filter glass body was designed in such a way to ensure easy mounting and trouble-free / tools less maintenance. This filter can be used as a separator (Without a filter element), liquid filter, and absorption cartridge. Can be used as an absorption filter.
The Reliable & long-term operation of an Analyzer depends upon the efficiency of the Sample conditioning system for which a stable dew point of the sample is essential. Axis COOLEREX Sample Gas Coolers are compressor cooled, equipped with efficient heat exchangers to provide a stable dew point of the sample at the outlet, thereby ensuring security with precise performance of the Analyzer. Cooling performance is ensured by having very tight control within the tolerance range of the dew point indirectly with mechanical control. The heat exchangers are either Single Coil or Dual Coil so that two different streams can be catered. A very compact housing design ensures the best placement of other components with a saving on the cost Insulation at top of the heat exchanger effectively isolates ambient effect. In COOLEREX power supply can be either 115 VAC or 230 VAC. For electrical connection provides separate Flameproof Junction box suitable in Zone 1 & 2, IIC hazardous area.
The Reliable & Long term operation of an Analyser depends upon the efficiency of the Sample conditioning system for which a stable dew point of the sample is essential. Axis Sample Gas Cooler is a compressor cooler equipped with efficient heat exchangers to provide stable dew point to the sample thereby ensuring security with precise performance of the Analyser. Cooling performance is ensured by having very tight control of temperature directly (not mechanical control for temp). The heat exchanger is either Single Coil or Dual Coil so that two different streams can be catered. A very compact housing design ensures the best placement of other components with saving costs. Insulation at top of the heat exchanger effectively isolates the ambient effect.
The Reliable & Long term operation of an Analyzer depends upon the efficiency of the Sample conditioning system for which a stable dew point of the sample is essential. Axis Sample Gas Cooler is a compressor cooler equipped with efficient heat exchangers to provide stable dew point to the sample thereby ensuring security with precise performance of the Analyzer. The Single and Dual paths so that two different streams can be catered. A very compact housing design ensures the best placement of other components with saving costs. Insulation at top of the heat exchanger effectively isolates the ambient effect
The reliable and long-term operation of an analyzer system depends upon the efficiency of the sample conditioning system for which a stable dew point of a sample is essential. Axis Peltier Cooler - PC1 is one of the options to maintain a stable dew point by removing condensation from the sample. It is mainly used where refrigeration-based (compressor-based) resources are a challenge. It is a fully mechanical device hence very less maintenance is required. it is used in Gas Analysis Systems. It works on Peltier Effect; Peltier blocks are used with an electronic circuit. PC1 can work in the most adverse environmental conditions. They are suited for working in high ambient temperatures. There are no refrigerants and thus no danger of leakage. Cooling performance is ensured by having very precise control of temperature directly ( due to the Peltier element ). The heat exchanger is either a single path or dual path so that two different streams can be catered to. A very compact design ensures the best placement of other components with an indirect saving of cost.
The Heatless dryers are ideal for low-flow air Drying operations. Dryer operation is fully automatic and outlet dew points as low as (-40°C) can be achieved. Heatless regeneration desiccant dryer is designed to protect Pneumatic equipment, controls, and processes, from the harmful and costly effects of moisture in compressed air and natural gas lines. Regenerative desiccant dryers operate on the principle of pressure swing adsorption, where a fraction of dry air or gas is used to regenerate the off-stream tower. No heat or exhaust power is required for desiccant bed regeneration. In natural gas applications, purge exhaust can be diverted to compressor suction or used as fuel. This means wet air is vented without the requirement of a separate drain or electrical power.
Due to the rising global industrialization, the monitoring of exhaust gas is increasingly important. The monitoring of Nitrogen Oxide (NOx) is particularly important due to its role in the formation of ground-level Ozone and acid rain. The gas converter module allows easy and cost-effective detection of the NOx components (NO & NO2). The module converts almost 100% of the NO2 content of a sample gas to NO using the replaceable reactor cartridge. The resulting NO gas is measurable by any commercially available IR analyzer. The reactor cartridge, designed in cooperation with a research institute, enables the conversion of high NO concentrations at a comparatively low temperature. Interferences from other gases such as CO, CO2, and NO are generally not observed. Moreover, a lifetime of over 12 months is possible under normal conditions. This leads to an obvious reduction in maintenance costs. The maintenance effort is further minimized through the special reactor fastener on the front panel allowing the replacement of the cartridge without tools. The temperature of the converter is adjustable through an easy-to-handle microcontroller.
The basic requirement for Educators is to perform according to a given parameter with trouble-free operations. These are used mainly at remote locations or very challenging locations or experiencing extreme weather conditions. AXIS brings you the equipment to meet diverse and exacting demands which runs trouble-free 24 X 7 in the Power generation sector, Chemical plants, Process Plants, Instruments Panels, and Food Processing machinery. AXIS Educators offer non-electrical means and no mechanical moving parts for transporting a sample stream. Eductor work on the basic flow dynamics principles. The principle of venturi nozzle applies here. This involves taking the power of one stream and accelerating through the tapered nozzle by increasing the velocity of the stream and creating a vacuum due to increased flow & decreased pressure. This will move the power of one stream to create a vacuum for the other. In turn, both are mixed & discharge from the exhaust port. Eductors are also known as Mechanical Vacuum Pump or Venturi Pump. Applications like hazardous areas where electrical apparatus are a challenge to use can have Eductor as the best alternative.
The Reliable & long-term operation of any process analyzer depends upon the efficiency of the sample conditioning system for which dust, solid particulate & moisture-free sample gas is essential. Where condensate separation and removal from the sample is a major problem for analyses of gas, Axis LD1 is the best solution. The main application of this product is the separation of condensation from the upstream sample gas conditioning for emission and process monitoring systems. It can be used only for applications with pressure above atmospheric pressure. Its major application is to collect the condensation from the upstream flow path of the sample gas cooler and automatically drain the condensation. Another application is for condensate pre-separation of saturated gas with immediate drainage. Model LD1 provided separators and automatic condensate drains for lateral gas connection for additional separator functions. For the above-mentioned function required overpressure means above atmospheric pressure. ASPL has 2 different versions of the model, one with Stainless Steel and the second with PVDF. Where high pressure occurs in the system then the Stainless Steel version is suitable or where low pressure occurs and some acidic contents are in the system then the PVDF version is suitable. Auto condensate removal is working on Float – Buoyance principle. Normally float closes the condensate drain outlet through the needle. Due to the raising condensate level, the outlet is released by the buoyancy of the float.
The Reliable & long-term operation of any process analyzer depends upon the efficiency of the sample conditioning system for which dust, solid particulate & moisture-free sample gas is most essential. Where condensate separation and removal from the sample is a major problem for analyses of gas, Axis CS1 with manual and auto condensate drain options is the best solution. The main application of this product is the separation of condensation from the downstream sample gas system. Sometimes sample gas has very high condensate contents so it is a must to remove it at the beginning of the sample gas conditioning system for safe operation. AXIS has 2 different versions of the model, one with Stainless Steel andthe second with Glass. Where high pressure occurs in the system then the Stainless Steel version is suitable or where low pressure occurs in the system then the Glass version is suitable.
The Reliable & long-term operation of any Process Analyzer depends upon the efficiency of the sample conditioning system for which dust, solid particulate & moisture-free sample gas is essential. Where condensate removal from the sample is a major problem for analyses of gas, the Condensate Catch Port is the best solution. CCP1 is equipped efficiently, to catch the condensation from the kinetic or Condensate separator or filter drain or wherever it is necessary to collect the condensation. The condensation-free sample gas is a must for ensuring the security of the Analyzer. The folded construction of the CCP1 & compatibility of the designed components like end cap (top & bottom) and transparent acrylic body materials ensure ease of mounting & trouble-free maintenance. This also acts as a volume chamber.
SMART ABOW is a new generation of immersion sensors for the measurement of oil or hydrocarbons in water based on the UV fluorescence principle. When excited by a light beam at a specific wavelength, some compounds re-emit light at a longer wavelength. Since there is a very limited number of chemicals such as PAH that have fluorescence signatures, this method gives a highly selective measurement with much higher sensitivity than the conventionally used infrared-based technology. This makes it possible to determine even the slightest traces of PAH’s.
SMART ABTS sensor consists of a light source and a photodetector. Incident light is scattered by the particles in the sample, and the scattered light is measured by the detector. The sensor uses a long-life near-infrared LED (880 nm/850nm) and the 90°scattered light method under ISO1027/ EN27027 to assure accurate turbidity values. An automated mechanical wiper is available to remain the surface clean and remove air bubbles from the optical Window to maximize the accuracy and minimize the maintenance requirement.
The ABCL is an electrode Amperometric sensor that operates on the Potentiostatic Amperometry method. This digital sensor comprises integrated electronic circuits and microprocessors housed within its structure. The ABCL housing is a robust Dust and Waterproof enclosure. Its design incorporates power and output isolation to guarantee electrical safety. Additionally, it features an in-built protection circuit, enhancing its resistance to interference and enabling adaptation to complex environments. Facilitating communication through an RS-485 transmission interface, the sensor employs the MODBUS-RTU communication protocol. This protocol, known for its simplicity and user-friendly nature, enables the sensor to output extensive electrode diagnostic information, showcasing its intelligence. With a low power consumption design, the sensor is suitable for a variety of usage scenarios. Furthermore, its internal memory serves to store calibration and setting information, ensuring data preservation in the event of a power failure.
The SMART ABAM - Ammonia Sensor measures the concentration of dissolved Ammonia nitrogen (NH4+-N) in water. The sensor uses three electrodes to determine the NH4+-N concentration, an Ammonia Ion Electrode, a Potassium Ion Electrode, and a pH Electrode. The SMART ABNO - Nitrate Sensor measures the concentration of dissolved nitrate-nitrogen (NO3--N) in water. The sensor uses two electrodes to determine the NO3--N concentration, a Nitrate Ion Electrode and a Chloride Ion Electrode. The SMART ABAM/ABNO sensor has a 1-1/2” NPT rear-facing thread for attaching an extension/immersion tube for easy installation from catwalks or handrails. The ABNO sensor is submersible with an IP68 degree of ingress protection. (The SMART ABAM sensor can not support its weight by the attached cable) A removable electrode guard facilitates easy electrode replacement when necessary. The sensor features an internal digital signal conditioning unit that allows the sensor to be mounted up to 300 meters from the controller
SMART ABpH is based on the electro-chemical ion selective method, which transforms the changes of ions in water into continuous electrical signals. The SMART ABpH is housing in a robust IP68 proof enclosure.
Introducing the NEW Rugged Dissolved Oxygen Sensor exclusively for BAS-SMART ABDO. The BAS-SMART ABDO sensor utilizes lifetime-based optical fluorescence sensor technology to provide an extremely stable, precise, and low maintenance dissolved oxygen sensor. Unlike traditional ABDO sensors. The SMART ABDO does not require membranes, stirring, and cleaning and allows deployment for many months without the need for re-calibration.
SMART ABCS includes two parallel plates placed into the measuring medium, provide potential on the two plates (usually are sine wave voltage), then measure the current between them: the sensor has two types two polar and four polar types. the selfcleaning function can be selected according to the use environment. it has stable data and reliable performance The internal self-diagnosis function makes ensures accurate data. Its installation and calibration are easy, It can be widely used in a sewage plant, water plant, water station, surface water, industry, and other applications
SMART UV-Vis Spectrum probe is a full absorption spectrum probe that analyzers water from 190–750 nm, which monitors NO3-N, COD, BOD, TOC, DOC, SAC25, TSS, Turbidity, Colour and O3 (application dependent). SMART UV-Vis probe incorporates spectrum compensation for light absorbing particles and turbidity which provides a unique solution for the monitoring of dissolved organic substances without sample pre-treatment.
Smart controller series transmitters are single and multi-channel devices for the measurement and control of pH, ORP, conductivity, Turbidity, and Chlorine in safe area applications across a broad range of industries including Chemical, Pharma, Pulp & paper, Mining, and Water treatment plants. The unique design of the smart controller allows the same unit to be used with any of the available sensor and communication modules The Smart controller delivers reliability and durability under the harshest of process conditions. The robust IP54 enclosure can be easily wall-, pipe- or panel-mounted. The hinged door with anti-tamper indication provides unrestricted access to the communication and sensor modules for simplified commissioning and maintenance.
Smart controller series transmitters are single and multi-channel devices for the measurement and control of pH, ORP, conductivity, Turbidity, and Chlorine in safe area applications across a broad range of industries including Chemical, Pharma, Pulp & paper, Mining, and Water treatment plants. The unique design of the smart controller allows the same unit to be used with any of the available sensor and communication modules The Smart controller delivers reliability and durability under the harshest of process conditions. The robust IP67 enclosure can be easily wall-, pipe- or panel-mounted. The hinged door with anti-tamper indication provides unrestricted access to the communication and sensor modules for simplified commissioning and maintenance.
Forging and press technology require large fluid volumes to be moved very rapidly under high overpressure. For this purpose, hydraulic accumulators are charged with the fluid up to the required operating pressure and pressurized to release the desired volume at the correct pressure at the defined time. The NS 64 and NS 100 series are suitable for monitoring the variable fill volumes for these systems. Available with up to 64 or 100 bar pressure ratings, they indicate the desired liquid level via clearly visible sight glass float, as well as via variable switching contacts and/or continuous output position encoder. A magnetic field generated by the interior unsinkable main float moves the sight glass float. The same magnetic field also triggers the electric contacts and the position encoder.
Monitoring oil pressure is essential in hydraulic systems and oil supply systems. It’s important to monitor both process-related pressure ranges as well as safety shutdowns, load limits or simply to determine if the lubricating pressure is adequate. The pressure transmitters must meet a variety of requirements with respect to their pressure resistance, signal output, programmability, or the plug connection style. A local or status display is often required for safety reasons The Pressotronik series spans a wide range of pressure transmitters and programmable pressure switches. They cover a broad pressure range, meet high safety requirements, and feature different signal types. The Eastmont housings of the remote displays can be grouped for easy and space-saving display groups, making them easier to monitor. The Pressotronik 702 pressure transmitters have a compact installation size, different connector plugs, and fine-tuned pressure levels ranging from low-pressure to high-pressure range.
Since the viscosity of oil changes based on the temperature, operating temperatures must be monitored. Depending on the requirements, monitoring by means of indicating the minimum temperature to warning points and ending with shut down will suffice. The warning or shut-off points are implemented using a bimetallic switch and in the process, hysteresis can also be used as a reset point. The TSK-Atex series consists of simple electrical equipment. In the case of intrinsically safe connections as per EN 60079-14, the TSK-Atex can be used in Zone 1 (group IIC, device category 2G) explosive areas; this also applies to the inner zone of the tank. The temperature switches are classified as temperature class T4. The temperature switch was designed to allow removing the electrical inner workings without having to remove the switching tube from the tank. This is convenient if the temperature switch is installed laterally inside the oil.
Level Switch for external Installation NS 1-G1/2-AM
The oil tank is the key component of hydraulic and lubrication systems. The operating oil is removed from the tank and then returned to it. Depending on what the system is used for, the levels in the oil tank can fluctuate to varying degrees. In most applications, the level fluctuations result in an exchange of the vapor phase above the oil level with the ambient air. Therefore, virtually all oil tanks are equipped with a so-called air breather, to prevent contaminants in the ambient air from entering the system. To reduce costs and space requirements, a number of other system-related functions such as liquid level and temperature monitoring are also combined in the air breather in the Nivovent series.
The differential pressure sensor VSA 24-D… is a microprocessor controlled pressure switch with two alarm outputs for pre-alarm and shut-off. Depending on the pressure loss in the filter head, the inner piston moves towards a spring. The position of the piston is registered by a pressure sensor placed in the upper part of the sensor. The measured values are converted to optical and electrical signals. As soon as power is turned on, four green LEDs, installed under a transparent cover, start flashing and indicate that the system is active. A temperature sensor measures the temperature of the fluid continuously. After the oil has reached its operational temperature, the device swaps to operation mode, and the green LEDs light up continuously. While the filter capacity decreases during operation, the differential pressure rises slowly. If the dirt holding capacity of the filter is reduced to approx. 25%, the yellow LED lights up.
In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored continuously. Here, modern factory automation requires compatible signals. Despite central system control, visualising the current level on the actual tanks is often desired. To minimise production costs and the space required on containers, it makes sense to use one monitor for both e.g. the fill level and oil temperature. The Nivotemp series meets virtually all requirements arising in this area of application.
The entrance of water into fluid power or lubrication systems reduces the life of oil significantly and causes damage to other components used in the systems. The most reliable method of detecting water in oil is to measure the interface level between water and oil when the water is separated. The BÜHLER water alarm units have a float that rises in water but sinks in oil. It only takes a build-up of around 90 ml of water in the sight glass to elevate the float and actuate a contact to signal danger. Water alarm units for in-tank installation as well as with two switching points and higher maximum pressure are available upon request.
The ingress of water into fluid power or lubrication systems reduces the life of oil significantly and causes damage to other components used in the systems. The most reliable method of detecting water in oil is to measure the interface level between water and oil when the water is separated. The BÜHLER water alarm units have a float that rises in water but sinks in oil. It only takes a build-up of around one-liter water in the sight glass to elevate the float and actuate the first contact to signal danger. The secondary contact warns that there is water in the tank. Water alarm units for in-tank installation are available upon request.
Water or moisture is just as much an undesired parameter in hydraulic and lubrication systems as particles and air, and can cause significant system damage. The Bühler Condition Monitoring Water Sensor (BCM-W) was designed specifically to continuously monitor the water content of oil whilst also measuring the temperature. The capacitive operating principle ensures reliable information on the saturation level of the respective oil regardless of the water absorption capacity. The BCM-W product line has a variety of functions. Starting with a pure sensor with switching- and 4-20 mA output all the way to digital communication in form of IO link, it covers all parameters. The version with display allows the display to be mounted directly to the sensor or externally.
The Thermolog MK2 / EK2 temperature sensor designed by Bühler Technologies is produced according to the Desina standard.Desina is a brand name of the VDW (German Machine Tool Builders’ Association) and stands for a technically specified standardized installation concept on machine tools, which has decentralized structures. With the standard analog output of 4 – 20 mAfound nearly throughout the entire sector of temperature measuring technology, the Thermolog MK2/EK2 provides a continuous signal, which remains stable over long distances irrespective of the cable length. A Pt 100 is used as the sensor. The small and compact transmitter is located inside the hexagon head. The Thermolog MK2/EK2 measures the current temperature quickly and precisely and converts it into an analog signal 4 – 20 mA. This signal can be implemented in the system control unit in any number of threshold values. The modular design separates “wet” and “dry” components. This allows for working on the electronics even when installed below the liquid level without draining the fluid.
Drives and hydraulic aggregates are also used in explosive areas in machine construction or raw material production. In hydraulic systems oil transfers power and motion, in drives, it’s a vital lubricant. Both as a power transfer medium and lubricant oil is heated by friction losses during operation. Oil/ air coolers stabilize the temperature and are indispensable for systems and drives for consistent power. The temperature further affects the aging behavior and the life of oils. BNK ATEX 3GD series coolers are suitable for use in zones 2 (gas) and 22 (dust) and temperature class 3. In addition to adequately protected drive motors, they are designed for easy maintenance and have a noise-optimized fan. To minimize the negative fluctuating oil flow has on the cooler design with varying ambient air temperatures, the BNK ATEX series features a built-in generator pump to circulate the oil.
Drives and hydraulic aggregates with bypass filter and/or cooler are also used in explosive areas in machine construction or raw material production. The advantage of these circuits is that they create stable and therefore more predictable operating conditions for both the filtration and cooling. Circulating oil in these circuits requires efficient and preferably silent circulation pumps which provide a constant flow rate at moderate pressures. Internal gear pumps have proved especially useful for these applications. They offer compact integration, are relatively insusceptible to particle contamination and have a long life. BFP ATEX 3GD series gerotor motor/pump units are particularly suitable for use in explosive zones 2 (gas) and 22 (dust) and temperature class 3.
TSM-G1/2, TSE-G1/2
Changes in the viscosity of hydraulic oil and lubricants due to the temperature require precise monitoring and stabilizing the operating temperature. Carefully monitoring the temperature further also affects the service life of the oils. The oil tank is generally accepted as the control point for the oil temperature, which will usually provide helpful averages. It may further be helpful to also monitor segments or individual units within a system. The values determined from the measuring points must be transferred to the system control according to standards. For safety reasons, it is advisable to at a minimum display the current oil temperature on the oil tank. The Thermotronik TT-77F offers accurate oil temperature measurement and display in one and allows a variety of programming options for the display and signal output. The Thermotronik TT-77W consists of a temperature sensor and the display unit for remote installation using the Easy Mount System and allows a variety of programming options for the display and signal outputs. The large range of system-compatible temperature sensors is tailored for use in hydraulic and lubrication technology.
Since the viscosity of oil changes based on the temperature, operating temperatures must be monitored. Depending on the requirements, monitoring by means of indicating the minimum temperature to warning points and ending with shut down will suffice. The warning or shut-off points are implemented using a bimetallic switch and in the process, hysteresis can also be used as a reset point. The TSM/TSE series consists of simple electrical equipment. In the case of intrinsically safe connections as per EN 60079-14, the TSM/TSE can be used in Zone 1 (group IIC, device category 2G) explosive areas; this also applies to the inner zone of the tank. The temperature switches are classified as temperature class T4. These temperature switches are designed in a manner, which allows the internal electrical components to be replaced without having to remove the switching tube from the tank. This is convenient if the temperature switch is installed laterally inside the oil.
Drives and hydraulic aggregates are also used in explosive areas in machine construction or raw material production. In hydraulic systems oil transfers power and motion, in drives, it’s a vital lubricant. Both as a power transfer medium and lubricant oil is heated by friction losses during operation. Oil/ air coolers stabilize the temperature and are indispensable for systems and drives for consistent power. The temperature further affects the aging behavior and the life of oils. BLK ATEX 2GD series coolers are suitable for use in zones 1 (gas) and 21 (dust) and temperature class 4. In addition to adequately protected drive motors, they have stainless steel fan housings. Efficient cooling matrixes, an easy to maintain design, and noise-optimized fans are additional features of the BLK ATEX series.
Before putting hydraulic or lubrication systems into service, the entire system should be flushed. Depending on the application, low viscosity flushing oil or the actual operating oil may be used. The purpose of flushing the system is to protect system components externally via mobile filtration units to ensure residue from assembly is removed. However, these mobile filtration units are also used to for the initial system fill or when changing the oil. The filtration units are quiet and compact, with an easy to transport design.
The Reliability and the lifetime of hydraulic oil and components primarily depend on the cleanliness of the fluid and the limitation of the operating temperature. For systems with varying flow rates off-line filter/cooler units are the most appropriate solution. Due to its compact design, the Bühler FGSL range of off-line units fit well into that segment of applications. Easy integration even allows the upgrading of existing systems.
Drives and hydraulic aggregates with bypass filter and/or cooler are also used in explosive areas in machine construction or raw material production. The advantage of these circuits is that they create stable and therefore more predictable operating conditions for both the filtration and cooling. Circulating oil in these circuits requires efficient and preferably silent circulation pumps which provide a constant flow rate at moderate pressures. Internal gear pumps have proved especially useful for these applications. They offer compact integration, are relatively insusceptible to particle contamination and have a long life. BFP ATEX 2GD series gerotor motor/pump units are suitable for use in explosive zones 1 (gas) and 21 (dust) and temperature class 4.
The oil tank is the key component of hydraulic and lubrication systems. The operating oil is removed from the tank and then returned to it. Depending on what the system is used for, the levels in the oil tank can fluctuate to varying degrees. In most applications, the level fluctuations result in an exchange of the vapour phase above the oil level with the ambient air. Therefore, virtually all oil tanks are equipped with a so-called air breather, to prevent contaminants in the ambient air from entering the system. To reduce costs and space requirements, a number of other system-related functions such as liquid level and temperature monitoring are also combined in the air breather in the Nivovent series.
Since the viscosity of oil changes based on the temperature, operating temperatures must be monitored. Depending on the requirements, monitoring by means of indicating the minimum temperature to warning points and ending with shut down will suffice. The warning or shut-off points are implemented using a bimetallic switch and in the process, hysteresis can also be used as a reset point. When applying switch points below 50 °C the temperature difference between the system and ambient should be adequate or the reset point cannot be reached reliably. The TSA-Atex series consists of simple electrical equipment without a separate voltage source. In the case of intrinsically safe connections as per EN 60079-14, the TSA-Atex can be used in Zone 1 (group IIC, device category 2G) explosive areas; this also applies to the inner zone of the tank. The temperature switches are classified as temperature class T4. The temperature switch was designed to allow removing the electrical inner workings without having to remove the switching tube from the tank. This is convenient if the temperature switch is installed laterally inside the oil.
Since the viscosity of oil changes based on the temperature, operating temperatures must be monitored. Depending on the application, this may have to take place continuously with a high degree of accuracy. In the process, the Pt100 has asserted its position as the standard sensor in nearly all areas of technology. It is a resistor, whose value changes in proportion to the temperature, which results in a continuous signal change. The resistance value of the Pt100 connection cable must be taken into consideration as of a length of >3 m, when aligning the measured value. The TF-M-Atex/TF-E-Atex series consists of simple electrical equipment without a separate voltage source. In the case of intrinsically safe connections as per EN 60079-14, the TF-MAtex/ TF-E-Atex can be used in Zone 1 (group IIC, device category 2G) explosive areas; this also applies to the inner zone of the tank. The temperature sensors are classified as temperature class T4. The design of the temperature switch was chosen, to enable the removal of the electrical inner workings without having to remove the switching tube from the tank. This is convenient if the temperature sensor is installed laterally inside the oil.
TF-M/E-G1/2
Hydraulic drives and lubricating systems are indispensable in machine construction, raw material production, navigation, and many other areas. Both as a power transfer medium and lubricant oil is heated by friction losses during operation. Since the viscosity of the oil changes along with the temperature, precise temperature stabilization using coolers is a vital requirement for systems and drives for consistent power. In addition to the unlimited supply of ambient air, water is also used as a coolant. The advantage of water is the low susceptibility to seasonal temperature fluctuations and large companies often use it as a central circulation coolant. BWT plate heat exchangers are a particularly efficient solution in these cases. They’re extremely compact, practically maintenance-free, and easy to install.
Pressure ratings up to 600 bar. Compact and robust design. Stainless steel measuring cell Pre.
In hydraulic systems, oil transfers power and motion, and it drives it’s a vital lubricant. Both as a power transfer medium and as a lubricant, oil is heated by friction losses during operation and changes its viscosity depending on the temperature. At the same time, it is subjected to mechanical strain due to the tribological processes in the systems and takes on wear particles this causes. If these particles aren’t removed as quickly as possible, they will cause further abrasion and wear. Hydraulic and lubrication systems therefore increasingly use bypass filters. The advantage of these circuits is that they create stable and therefore more predictable operating conditions for both the filtration and cooling. The BNF series has compact generator pump/filter combinations with different capacities, including custom. The filter housings are suitable for DIN 24550 filter elements.
Hydraulic drives and lubricating systems are indispensable in machine construction, raw material production, navigation, and many other areas. Both as a power transfer medium and lubricant oil is heated by friction losses during operation. Since the viscosity of the oil changes along with the temperature, precise temperature stabilization using coolers is a vital requirement for systems and drives for consistent power. In addition to the unlimited supply of ambient air, water is also used as a coolant. The advantage of water is the low susceptibility to seasonal temperature fluctuations and large companies often use it as a central circulation coolant. BWT plate heat exchangers are a particularly efficient solution in these cases. They’re extremely compact, practically maintenance-free, and easy to install.
Drives and hydraulic aggregates are also used in explosive areas in machine construction or raw material production. In hydraulic systems oil transfers power and motion, in drives, it’s a vital lubricant. Both as a power transfer medium and lubricant oil is heated by friction losses during operation. Oil/ air coolers stabilize the temperature and are indispensable for systems and drives for consistent power. The temperature further affects the aging behavior and the life of oils. BNK ATEX 2GD series coolers are suitable for use in zones 1 (gas) and 21 (dust) and temperature class 4. In addition to adequately protected drive motors, they have stainless steel fan housings. To minimize the negative fluctuating oil flow has on the cooler design with varying ambient air temperatures, the BNK ATEX series features a built-in generator pump to circulate the oil.
Drives and hydraulic aggregates are used in machine construction, raw material production, maritime and many other areas. In hydraulic systems oil transfers power and motion, in drives it’s a vital lubricant. Both as a power transfer medium and lubricant oil is heated by friction losses during operation. Since the viscosity of the oil changes along with the temperature, precise temperature stabilisation using oil/air coolers is a vital requirement for systems and drives for consistent power. The temperature further affects the ageing behaviour and the life of oils. To minimise the negative fluctuating oil flow has on the cooler design with varying ambient air temperatures, it’s wise to combine the cooler with a built-in circulation pump. The BNK series is characterised by efficient cooling matrixes, a compact, easy to maintain design and energy-efficient drive motors along with gerotor pumps.
In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored continuously. Here, modern factory automation requires compatible signals. Despite central system control, visualising the current level on the actual tanks is often desired. The Nivotemp M series was designed to integrate small oil tanks and little space available for add-on units and monitoring equipment in sophisticated system monitors. It combines small installation dimensions with a high functional density and easy operation.
Multifunctional device for display and monitoring of various measurements like level, temperature, and pressure. Units like cm, inch, °C, °F, bar or psi programmable. Up to four programmable outputs. Analogue output (adjustable as current or voltage output) plus one, two or four programmable outputs. Two switching outputs adjustable as frequency output (1 to 100 Hz). Switching output adjustable as window or hysteresis. Menu structure based on VDMA guidelines.
A single installation includes multiple components, greatly reducing the number of necessary tank penetrations resulting in lower overall costs. General description of filling control: The 2/2-way cartridge valve automatically stops filling at maximum level. This is provided by the highest level contact at Lx. At power-up of the unit the valve position will change to “b”. This means the flow path from 2 to 1 is open and filling is in process. When the fluid level reaches the highest level contact (normally open contact at position Lx), the valve will switch to position “a”. The path from 2 to 1 is closed now. The valve blocks the flow from the filling port to the reservoir. During operation a second level contact signals a lack of oil. Using an external control a refill of the tank can be made automatically via the filling terminal or the maintenance personnel can be called to do this. In both cases the filling valve will be reset to position “a” as soon as level Lx is reached.
NS 25/15 AM-DNV, NS 25/25 AM-DNV, NS 25 AM G1/2-DNV The control of liquid level in reservoirs, gear boxes or other complex constructions often requires the use of controls with a visual indicator that can be mounted externally. The NS 25… series of level controls has been specifically designed for marine and off-shore applications. Due to the harsh application environment these products must be specifically tested and certified. The visual level indicator is a standard item and has excellent visibility from any direction. The indicator itself is guided in a transparent tube and is moved by the magnetic field of the float inside the stand pipe. The electrical contacts are mounted to the indicator scale. The contacts can be adjusted to any position. The level indicator is mounted to the vessel by pipe fittings or flanges. Contacts MKS-1/W-L-24V are equipped with an LED.
Liquid Level Control for External Mounting NS 25/15 AM-DNV, NS 25/25 AM-DNV, NS 25 AM G1/2-DNV The control of liquid level in reservoirs, gear boxes or other complex constructions often requires the use of controls with a visual indicator that can be mounted externally. The NS 25… series of level controls has been specifically designed for marine and off-shore applications. Due to the harsh application environment these products must be specifically tested and certified. The visual level indicator is a standard item and has excellent visibility from any direction. The indicator itself is guided in a transparent tube and is moved by the magnetic field of the float inside the stand pipe. The electrical contacts are mounted to the indicator scale. The contacts can be adjusted to any position. The level indicator is mounted to the vessel by pipe fittings or flanges. Contacts MKS-1/W-L-24V are equipped with an LED.
The oil tank is the key component of hydraulic and lubrication systems. The operating oil is removed from the tank and then returned to it. Depending on what the system is used for, the levels in the oil tank can fluctuate to varying degrees. In most applications, the level fluctuations result in an exchange of the vapor phase above the oil level with the ambient air. Therefore, virtually all oil tanks are equipped with a so-called air breather, to prevent contaminants in the ambient air from entering the system. To reduce costs and space requirements, a number of other system-related functions such as liquid level and temperature monitoring are also combined in the air breather in the Nivovent series.
The Nivovent 71-0-Atex features the integration of the breather filter with level controls (temperature control is an option). The interface between the tank top and Nivovent unit is standardized (to DIN 24557 part 2). These dimensions are widely used for the design of breather units and offer the opportunity of updating existing systems with new Nivovent technology. The breather filter elements are disposable. The Nivovent 71-0-Atex can be equipped with a number of adjustable standardized level contacts having either temperature contacts or sensors. The total number of contacts is limited by the number of poles available in the electrical connector chosen. Please check the relevant tables overleaf for correct selection. The level contacts are bistable thus only one float is required and the contacts can be adjusted at any time without the need to remove the unit from the reservoir.
Forging and press technology require large fluid volumes to be moved very rapidly under high overpressure. For this purpose, hydraulic accumulators are charged with the fluid up to the required operating pressure and pressurised to release the desired volume at the correct pressure at the defined time. The NS 250 and NS 360 series are suitable for monitoring variable fill volumes in these types of systems. Available with up to 250 or 360 bar pressure ratings, they indicate the desired liquid level via clearly visible sight glass float, as well as via variable switching contacts and/or continuous output position encoder. A magnetic field generated by the interior unsinkable main float moves the sight glass float. The same magnetic field also triggers the electric contacts and the position encoder.
NS-OM-61/63
NS-OM-61/63
Mechanical Pressure Switches with adjustable switching output for monitoring pneumatic or hydraulic pressure. Robust and compact unit. Adjustable switching point. High precision. Up to 350 bar max. working pressure (more upon request).
Hydraulic and lubrication systems therefore increasingly use bypass filters and/or coolers. The advantage of these circuits is that they create stable and therefore more predictable operating conditions for both the filtration and cooling. Circulating oil in these circuits requires efficient and preferably silent circulation pumps which provide a constant flow rate at moderate pressures. Internal gear pumps, so-called gerotor pumps, have proved especially useful for these applications. They offer compact integration, are relatively insusceptible to particle contamination and have a long life. The BFP series features a range of particularly compact circulation pumps specifically designed for this area of application.
The oil tank is the key component of hydraulic and lubrication systems. The operating oil is removed from the tank and then returned to it. Depending on what the system is used for, the levels in the oil tank can fluctuate to varying degrees. In most applications, the level fluctuations result in an exchange of the vapor phase above the oil level with the ambient air. Therefore, virtually all oil tanks are equipped with a so-called air breather, to prevent contaminants in the ambient air from entering the system. To reduce costs and space requirements, a number of other system-related functions such as liquid level and temperature monitoring are also combined in the air breather in the Nivovent series.
The entrance of water into fluid power or lubrication systems significantly reduces the life of oil and causes damage to other components used in the systems . The most reliable method of detecting water in oil is to measure the interface level between water and oil when the water is separated. This Nivotemp version is equipped with an additional float which rises in water but sinks in oil. The reservoir has to be equipped with a small cavity in the bottom and the contact tube of the Nivotemp reaches down to the lowest point of the cavity. When a volume of approx. 230 ml of free water accumulates in the cavity the float will rise and actuate a contact. The signal can either be used to open a drain valve, drain the water off, or just to set an alarm. An easily installed prefabricated sump is available as an accessory.
In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored continuously. Here, modern factory automation requires compatible signals. Despite central system control, visualising the current level on the actual tanks is often desired. To minimise production costs and the space required on containers, it makes sense to use one monitor for both e.g. the fill level and oil temperature. The Nivotemp series meets virtually all requirements arising in this area of application.
In hydraulics and lubrication technology, the fill level of oil tanks needs to be monitored. Here, modern factory automation requires compatible signals. The Nivotemp M series features a group of devices for both monitoring the level as well as the level and temperature in hydraulic or lubrication units.
In hydraulics and lubrication technology, the fill level of oil tanks needs to be monitored continuously. Here, modern factory automation requires compatible signals. Despite central system control, visualizing the current level on the actual tanks is often desired. To minimize production costs and the space required on containers, it makes sense to use one monitor for both e.g. the fill level and oil temperature. The Nivotemp series meets virtually all requirements arising in this area of application.
NS-OM-61/63 Visual and electrical liquid level monitoring. Max. voltage 230 V. Variable lengths. Version NS-OM-63 with analog output 4-20 mA for continuous liquid level control.
A display of LED’s with different color illuminates under a transparent cover. After power is turned on, the green LED’s start flashing, indicating that the system is active. A pressure sensor continuously controls the pressure loss in the filter head and a temperature sensor simultaneously registers the temperature of the fluid. After the oil has reached the operating temperature (which is typically above 86°F), the green LED’s stop flickering. (which is typically above 86°F), the green LED’s stop flickering. The sensor then is in operational mode. The signal points can be set closer to the cracking pressure of the bypass valve due to the high accuracy of the pressure sensor. This allows more use of the total dirt holding capacity and saves operational costs at the same time.
In hydraulic systems oil transfers power and motion, and in drives it’s a vital lubricant. Both as a power transfer medium and as a lubricant, oil is heated by friction losses during operation and changes its viscosity depending on the temperature. At the same time it is subjected to mechanical strain due to the tribological processes in the systems and takes on wear particles this causes. If these particles aren’t removed as quickly as possible, they will cause further abrasion and wear. Hydraulic and lubrication systems therefore increasingly use bypass filters with built-in cooler. The advantage of these circuits is that they create stable and therefore more predictable operating conditions for both the filtration and cooling. The BKF series has compact gerotor pump/filter/water cooler combinations with different capacities, including custom. These compact units are combined with the extremely efficient BWT series late heat exchangers. The filter housings are suitable for DIN 24550 filter elements.
The Nivotemp M-0-Atex series comprises a group of controllers for the control of both liquid level and temperature in fluid power packs or lubrication systems. This unit is a simple device without its own voltage source. In an intrinsically safe installation acc. to EN 60079-14 the level switch can be used in hazardous locations zone 2 (group IIC cat. 3G). This applies to the zone inside of the reservoir. For standard application the temperature class is T4 at ambient temperatures -20 °C to +80 °C.
The installation via a central thread is cost effective and allows the use of a small float with good buoyancy Despite small physical dimensions the Nivotemp M has a series of adjustable bistable contacts. The number of contacts is determined by the type of connector.
A multi-use device reduces installation space and makes maintenance easy. Flange Dimensions according to DIN 24557 Part 2. Air breather filter with integrated level and temperature monitoring. Filling port with a quick disconnect device. Sample port with a quick disconnect device. Visual monitoring of the air breather filter optional.
Drives and hydraulic aggregates are used in machine construction, raw material production, maritime and many other areas. In hydraulic systems oil transfers power and motion, in drives it’s a vital lubricant. Both as a power transfer medium and lubricant oil is heated by friction losses during operation. Since the viscosity of the oil changes along with the temperature, precise temperature stabilisation using coolers is a vital requirement for systems and drives for consistent power. The temperature further affects the ageing behaviour and the life of oils. Due to the unlimited supply, ambient as air as the coolant for heat dissipation. However, since the air temperature fluctuates throughout the year and oil flow can also fluctuate, the heat exchanger required to stabilise the oil temperature must be carefully configured. The BLK series features efficient cooling matrixes, an easy to maintain design and energy-efficient fan motors.
Drives and hydraulic aggregates are also used in explosive areas in machine construction or raw material production. In hydraulic systems oil transfers power and motion, in drives, it’s a vital lubricant. Both as a power transfer medium and lubricant oil is heated by friction losses during operation. Oil/ air coolers stabilize the temperature and are indispensable for systems and drives for consistent power. The temperature further affects the aging behavior and the life of oils. BLK ATEX 3GD series coolers are suitable for use in zones 2 (gas) and 22 (dust) and temperature class 3. In addition to adequately protected drive motors, they have stainless steel fan housings. Efficient cooling matrixes, an easy to maintain design, and noise-optimized fans are additional features of the BLK ATEX series.
In hydraulics and lubrication technology, the fill level of oil tanks needs to be monitored continuously. Here, modern factory automation requires compatible signals. Despite central system control, visualizing the current level on the actual tanks is often desired. To minimize production costs and the space required on containers, it makes sense to use one monitor for both e.g. the fill level and oil temperature. The Nivotemp series meets virtually all requirements arising in this area of application.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The TC-Double series allows you to precisely match the twostage cooling system (series connection) through separate configuration of the cooling block temperatures. This allows the TC-Double to also be operated with built-in pre-cooler.
In emission measurement, process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations as well as measurements in small combustion plants or exhaust gas analysis in automotive engineering. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The TC-Double+ series features a new generation heat exchangers with a particularly low wash out effect of watersoluble components and are specifically suitable for measuring emissions. Particularly the wash out effect of SO2 is low. These coolers can therefore be used for so-called automated measuring systems (AMS) per EN 15267-3.
Certain applications in fluid and gas analysis require additional safety precautions, including flow meters. Here it’s particularly important to protect the clear measuring tube from mechanical damage. In this series a solid, slotted stainless steel protective tube ensures this protection. Even with the measuring tube already having a thick wall, the stainless steel casing of course also protects the surroundings in the event a glass cylinder bursts.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key for safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
Gas analysis is key for safe and efficient system operation in the chemical industry, petrochemistry or biochemistry. Many of the analysis processes used in these fields require sample gas extraction and conditioning. Sample gas pumps convey the sample gas from the sampling point to the conditioning system. The main item in these pumps designed specifically for the application is the PTFE single-piece bellow. Combined with the pump head, also single-piece, this solution provides high resistance against particularly aggressive sample gas. Turning the pump head allows gas with condensate to be conveyed without a problem.
Even in explosive systems in the chemical industry, petrochemistry or biochemistry, gas analysis is key for safe operation. Many of the analysis processes used in these fields require extracting and special conditioning of the sample gas. Sample gas pumps convey the sample gas from the sampling point to the conditioning system. The main item in these specially designed pumps is the PTFE single-piece bellow. Combined with the pump head, also single-piece, this solution provides high resistance against particularly aggressive sample gas. Turning the pump head allows gas with condensate to be conveyed without a problem. There are several different models with separate drive, depending on the requirements. These versions allow the installation of a coupling flange to install the pump heads inside heated housings away from the motor whilst the motor remains outside the housing. The series are available for various EX hazard and classification zones with flow rates up to 800 L/h.
In extractive analysis of process and flue gases, reliable and constant reduction of sample gas humidity is essential. Bühler Technologies offers a custom range of gas coolers based on Peltier and compressor technology. Process-based cooling temperature control guarantees maximum dew point stability. This allows highest quality industrial gas analysis. Bühler Technologies developed the extremely compact PC1 precooler to further increase the energy efficiency of the above main coolers. It is used as a small passive cooling level upstream from the main cooler. The PC1 very effectively uses the ambient air supplied by the fan as a coolant. In moderate ambient temperatures (up to 40 °C) it therefore allows the use of small, cost-effective main coolers. The intelligent gas path in the interchangeable precooling heat exchanger further ensures very low washout of watersoluble gases (e.g. SO2/complies with EN 15267). Optional PC1 heat exchangers with built-in acid meter connection (H3PO4) complete the concept.
Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. There frequently is a need to remove gaseous components from the sample gas by washing these out. The WF-AGF-PV-30 wash bottle is a product suitable for this purpose. The wash bottle is filled with water or another suitable medium to wash out interfering components. It is made from non-corrosive PVDF and glass. The Unique quick-release fastener allows for easy medium changes. The bottom gas inlet ensures sufficient contact times. An optional version with bubbler ensures the gas is finely dispersed in the washing medium.
One conditioning step in extractive analysis of process and emissions gases is reliable, constant reduction of humidity in the sample gas. The condensate this produces results in sometimes considerable washout effect. This can result in inaccurate measurements, particularly in acidic gas components (e.g. SO2). Adding acidic liquids at an appropriate point in the conditioning system reduces the acid solubility by manipulating the pH level in the condensate, ensuring reliable measurements. The EMIDos dosing unit was designed for this specific application. It consists of a wall mount made from non-corrosive stainless steel. This holds the reservoir for the dosing agent and the dosing pump with adequate capacity. The tubing has minimal cross-sections to ensure rapid response times. An adjustable sensor for monitoring the residual level is located on the side. The suction port us located inside the container cover.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In addition to electric sample gas coolers, we also offer scrubbers and water coolers for specific applications. The following models describe some of the basic versions. Please contact us with your request; we will gladly provide you with a version for your specific application: Water Cooler 170 IST and 170 IST Titanium Sample gas is transported through a tube coil inside an outer shell water flows through. The condensate outlet is located at the bottom of the unit, along with a thermometer (not applicable to titanium version) which displays the gas outlet temperature. Model 170 IST Titanium is entirely made from titanium. Gas Scrubber 161 PVDF spec. Gas scrubbers utilise the direct contact between the flow of sample gas and water to remove undesirable components from the sample gas. The gas inlet is far below the water level. The purified gas is discharged at the gas scrubber head.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
In many applications gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
In many applications gas analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. The design of the GAS 222.15-MA is particularly suited for marine applications.
Especially in emission control via portal analysis systems the sample gas cannot always be extracted without particle contamination. The necessary conditioning systems must be compact and lightweight and therefore require small and light system components. We offer special filter housings for these applications and for installation into a standard 19” rack. The AGF-FE-4 filters screw into the front panel and their sample gas connections are located at the back.
Especially in emission control via portal analysis systems the sample gas cannot always be extracted without particle contamination. The necessary conditioning systems must be compact and lightweight and therefore require small and light system components. We offer special filter housings for these applications and for installation into a standard 19” rack. The AGF-FE filters screw into the front panel with sample gas connections at the back. They are available in a variety of material combinations.
Especially in emission control via portal analysis systems the sample gas cannot always be extracted without particle contamination. The necessary conditioning systems must be compact and lightweight and therefore require small and light system components. We offer special filter housings for these applications and for installation into a standard 19” rack. AGF-FA-5 filters are screwed onto the front panel. The sample gas connections and an additional connection for the moisture detector can be accessed from the front panel.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The RC 1.1 is a compressor sample gas cooler for up to 2 gas paths and is an essential component for sophisticated analysis systems.
Even in explosive systems in the chemical industry, petrochemistry or biochemistry, gas analysis is key for safe operation. Many of the analysis processes used in these fields require extracting and special conditioning of the sample gas. Sample gas pumps convey the sample gas from the sampling point to the conditioning system. The main item in these specially designed pumps is the PTFE single-piece bellow. Combined with the pump head, also single-piece, this solution provides high resistance against particularly aggressive sample gas. Turning the pump head allows gas with condensate to be conveyed without a problem. There are several different models with separate drive, depending on the requirements. These versions allow the installation of a coupling flange to install the pump heads inside heated housings away from the motor whilst the motor remains outside the housing. The series are available for various EX hazard and classification zones with flow rates up to 700 L/h.
In emission measurement, process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations as well as measurements in small combustion plants or exhaust gas analysis in automotive engineering. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The RC 1.2+ series features a new generation heat exchangers with a particularly low wash out effect of water-soluble components and are specifically suitable for measuring emissions. Most notably, the washout of SO2 is low. These coolers can therefore be used for so-called automated measuring systems (AMS) per EN 15267-3.
In emission measurement, process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations as well as measurements in small combustion plants or exhaust gas analysis in automotive engineering. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The EGK 2-19+ series features a new generation heat exchangers with a particularly low wash out effect of watersoluble components and are specifically suitable for measuring emissions. Particularly the wash out effect of SO2 is low. These coolers can therefore be used for so-called automated measuring systems (AMS) per EN 15267-3.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The compact system EGK 2-19 is a 19″ rack with sample gas cooler and condensate drain, particle filter and moisture detector for up to two gas paths.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. Many applications require equipment which can be used in explosive areas. This is where the TC- tandard X2 series provides solutions for Zone 2 or Class I, Division 2. Despite its small size, the TC-Standard X2 sample gas cooler already covers a large percentage of standard applications in gas analysis.
In extractive gas analysis it is important to protect the measuring cells from any type of contaminants. In addition to removing particle contamination, it’s also extremely important to separate moisture and condensation. Depending on the composition of the sample gas, a preseparator may also need to be installed upstream from the sample gas cooler. This reduces the load on the cooler when the moisture content fluctuates. In some applications removing the moisture with a preseparator and downstream coalescence filter may suffice. If the sample gas is pressurised, the pre-separators may be equipped with built-in automatic drain valves.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The EGK 10 is a compressor high performance cooler with a special heat exchanger. Suitable for wall-mounting or desktop operation.
Flow meters perform different tasks in conditioning systems for gas analysis. The typically quite complex applications require the use of particularly corrosion-resistant materials and high operating reliability. In addition to visual flow measurements, they are also suitable for determining the depletion of the filtration capacity of the filter installed in the conditioning line. Electric limit switches can be mounted to the measuring tube for this purpose. These connect to the control system via suitable switch amplifiers. Types with built-in needle valve further allow for setting a specific flow rate.
In many applications gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
Condensate accumulates when conditioning gas in gas conditioning. It always accumulates when cooling moist sample gas. On one hand this may occur inadvertently if thermal bridges occur in the sample gas lines. On the other hand the deposit of moisture is necessary to protect the measuring cells in the analyser from damage and/ or stabilise measurements. Since the sample gas is often conveyed through the analysis system with suction, the condensate must be pumped off to remove it. So-called peristaltic pumps are particularly suited for this purpose. They systemically protect the sample gas system from external air and based on the hose material used offer high resistance against the often times highly corrosive condensate. Many applications require equipment which can be used in explosive areas. This is where the CPsingle X1 and CPdouble X1 with flame-proof synchronous geared motors solutions for zone 1. The CPsingle X1 and CPdouble X1 pump series were developed specifically for these severe operating conditions.
The screw fittings are only for connecting and joining stainless steel tubes. Only screw fittings frequently used with our gas conditioning components are listed: Screw-in connections, straight and angled. Tube adapter, straight and angled. Sealing plug. Spare parts.
The APO series sample gas probes are unheated probes for standard applications. A DN65 PN16 flange made from 1.4571 with G 3/8″ connector serves as the basis. This series also has versions made entirely from special materials and custom versions. Please feel free to request our specialist.
The fittings are used to connect plastic tubes and pipes to glass fittings, for example in glass heat exchangers or glass condensate traps. We further offer types with hose fittings integrated in the swivel nut and types to insert and secure in existing glass fittings. You will further find seals required for using the selected plug-in fittings with your existing glass fittings. Tubes can also be connected to glass connections without fittings by using a support tube and secured with the glass seal. These support tubes are also listed in this data sheet.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The EGK 1SD is a medium duty compressor sample gas cooler. It can be wall-mounted or used as a table-top cooler with up to two gas paths.
These reversing taps are primarily used to switch analysis flows. They are available with different switching functions. Clamps available for mounting.
Condensate accumulates when conditioning gas in gas conditioning. It always accumulates when cooling moist sample gas. On one hand this may occur inadvertently if thermal bridges occur in the sample gas lines. On the other hand the deposit of moisture is necessary to protect the measuring cells in the analyser from damage and/ or stabilise measurements. Since the sample gas is often conveyed through the analysis system with suction, the condensate must be pumped off to remove it. So-called peristaltic pumps are particularly suited for this purpose. They systemically protect the sample gas system from external air and based on the hose material used offer high resistance against the often times highly corrosive condensate. The CPsingle and CPdouble pump series were developed specifically for these severe operating conditions.
The traditional assembly of sample gas probes vastly complieswith the VDI/VDE guidelines 3516 from 1978. Based onadvances made since then, particularly in dust filtration, wenow have technical solutions which are far superior to thetraditional versions. Particularly for use in low temperatureapplications but moderate to high dust loads, using the newlydeveloped ECO probe can particularly considerably reduce themaintenance costs of filters. Yet a simple, compact design wasalso important to us to keep purchase and installation costslow. The heart of the ECO probe is the probe body, which holdsthe solenoid valves necessary to blowback the filter element,but also the air reservoir needed for more efficient blowback.The filter element is located directly inside the process andcan be sintered stainless steel or textile. The dust whichcollects on the filter element is blow directly back into theprocess during blowback.
PVDF version: With PVDF fittings the hose slides of a cylindrical connection piece and secured with a clamping collar and the knurled nut. PFA version: With PFA fittings the rigid tube slides over a cylindrical connection piece. When tightening the knurled nut, the gasket will seal the connection and a cutting ring secure it.
In extractive gas analysis it is important to protect the measuring cells from any type of contaminants. In addition to removing particle contamination, it’s also extremely important to separate moisture and condensation. If the sample gas flowing through the conditioning system is pressurised, drains with automatic drain valves can be used to discharge condensate settling in the sample gas cooler. These do not require any additional energy supply and are available in various material combinations.
Gas analysis is key for safe and efficient system operation in the chemical industry, petrochemistry or biochemistry. Many of the analysis processes used in these fields require sample gas extraction and conditioning. Sample gas pumps convey the sample gas from the sampling point to the conditioning system. The main item in these pumps designed specifically for the application is the PTFE single-piece bellow. Combined with the pump head, also single-piece, this solution provides high resistance against particularly aggressive sample gas. Turning the pump head allows gas with condensate to be conveyed without a problem.
Sample gas pumps P 2.3, P 2.3C, P 2.83, P 2.4, P 2.4C, P 2.84 Gas analysis is key for safe and efficient system operation in the chemical industry, petrochemistry or biochemistry. Many of the analysis processes used in these fields require sample gas extraction and conditioning. Sample gas pumps convey the sample gas from the sampling point to the conditioning system. The main item in these pumps designed specifically for the application is the PTFE single-piece bellow. Combined with the pump head, also single-piece, this solution provides high resistance against particularly aggressive sample gas. Turning the pump head allows gas with condensate to be conveyed without a problem.
Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. There frequently is a need to remove gaseous components from the sample gas through ad-/absorption. For applications where the incidence of interfering components may fluctuate or the materials must have a long lifetime, the ADF-170/300 model housings are the top choice.
Even if the particular contaminant has already been removed at the extraction point through effective particle filtration inside the gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination. Additional filters are therefore often installed at the point where the sample gas enters the analysis system and also before delicate system components. The filter housings must be made of corrosion-resistant, non-absorbent materials, easy to install and easy to maintain. They should further be compatible with various filter elements. Model AGF-VA-350 has a small stainless steel housing and is suitable for operating pressures up to 350 bar.
The membrane filter water stop protects the gas analyser from liquids, aerosols and particles. The filter installs in the tubing (PTFE) or piping (stainless steel) directly before the gas analyser.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The small dimensions make the TC-MINI sample gas cooler particularly suited for OEMs to build into compact sample gas conditioning systems.
Using so-called “self-cleaning” gas filters is worth considering for sample gas systems where secondary contamination primarily consisting of larger particles are to be expected. The functional principle of these filters is that of the ‘Cross Flow’ process. Here a partial stream is continuously adequate for analysis is continuously extracted from the main sample gas flow. Inside the housing, the main stream is forced along the filter element in a spiral. The dirt particles from the partial stream deposited on the surface of the element are carried along by the main stream and discharged. The continuous discharge of dirt deposit results in a very long filter element life, thus low maintenance. The BF2-S was developed specifically for these applications.
Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. There frequently is a need to remove gaseous components from the sample gas through adsorption/absorption. The ADF-PV-30 is a housing suitable for this application. Made from PVDF and glass and equipped with Unique quick-release fastener, it can be filled with various adsorbents/absorbents. The bottom gas inlet ensures sufficient contact times.
The most common problems in gas analysis systems are related to sample gas conditioning and the sampling lines. Condensate in the sample gas, adsorption and contamination from the sample gas line can affect the accuracy of measurements considerably. Sampling lines transport the sample gas from the sampling point to the gas conditioner or the analyser. The heated sampling lines keep the temperature of the sample gas above the dew point or the reaction temperature, preventing gas condensation in the analysis system. Condensation must be prevented in the sampling lines for accurate, reliable measurements. Our experts will gladly advise you on selecting suitable sampling lines and other components for your specific application.
Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. One requirement may be that the sample gas be particle-free and extracted and transported hot. The AHF-22 heated particle filter is particularly suited for this type of application. The filter element can quickly be changed without interruption and without tools.
Even if the particular contaminant has already been removed at the extraction point through effective particle filtration inside the gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination. Additional filters are therefore often installed at the point where the sample gas enters the analysis system and also before delicate system components. The filter housings must be made of corrosion-resistant, non-absorbent materials, easy to install and easy to maintain. They should further be compatible with various filter elements. The AGF-T- 30 series has a PTFE and glass housing. The filter head has an additional connection for installing a moisture detector. A variety of materials is available based on the application.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. Despite its small size, the TC-Standard sample gas cooler already covers a large percentage of standard applications in gas analysis.
Model KFD/KFA: Single channel switch amplifier for inherently safe control circuits with one signal output (change-over), one LED each for monitoring the voltage and alarm output function. Model KCD: Single channel amplifier inside a compact terminal box with LED switching status indicator. We offer various switch amplifiers for connecting the limit switches to flow meters.These may only be installed outside explosive areas and have a number of additional safety or monitoring functions.
Even if the particular contaminant has already been removed at the extraction point through effective particle filtration inside the gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination. Additional filters are therefore often installed at the point where the sample gas enters the analysis system and also before delicate system components. The filter housings must be made of corrosion-resistant, non-absorbent materials, easy to install and easy to maintain. They should further be compatible with various filter elements. The AGF-PV-30 series features a PVDF and glass housing and is equipped with the Bühler Unique quick-release fastener. The filter head has an additional connection for installing a moisture detector. A variety of materials is available based on the application.
The back pressure regulator is used to maintain a constant sample gas pressure inside the analyser regardless of the respective barometer reading, and installs in the gas outlet of the analyser. Using the back pressure regulator eliminates measuring errors due to barometric variation. The back pressure regulator is set to a pressure higher than the normal fluctuations in the atmospheric air pressure.
In extractive gas analysis the sample gas must be conditioned before it enters the measuring cell of the analyser. One of these conditioning stages is moisture precipitating in so-called sample gas coolers. Applications where the moisture content of the sample gas is particularly high or the moisture content fluctuates greatly, installing a precooler in the supply line to the actual sample gas cooler will increase reliability. This precooler consists of an appropriately dimensioned heat exchanger, which only uses the temperature gradient between the sample gas and ambient air, and a condensate pump. The TS precooler comes inside a protection cage, ready to install.
In extractive gas analysis the sample gas must be conditioned before it enters the measuring cell of the analyser. One of these conditioning stages is moisture precipitating in socalled sample gas coolers. Since the composition of the sample gas can fluctuate, a condensate slip downstream from the cooler cannot be entirely ruled out. Moisture detectors installed in the cooler output indicate such slip. Combined with suitable controllers this will generate the respective signals/alarms in the control system. The moisture detector series features a wide range of options.
Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. One disturbance variable which must also be eliminated is aerosols. The aqueous suspended particles can easily be removed from the gas by coagulation using special filter matrices. During this process, the tiny aerosols accumulate on the fibres of the filter matrix through collision, forming drops increasing in size. Once large enough, the condensate which forms drains into the filter bowl and is then removed. Model K-AGF-PV-30-A uses the AGF-PV filter series housing made from PVDF and glass and has the respective fittings to adapt it to the coagulation function. The easy installation and the Unique quick-release fastener are additional advantages of this model.
Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. One disturbance variable which must also be eliminated is aerosols. The aqueous suspended particles can easily be removed from the gas by coagulation using special filter matrices. During this process, the tiny aerosols accumulate on the fibres of the filter matrix through collision, forming drops increasing in size. Once large enough, the condensate which forms drains into the filter bowl and is then removed. Model K-AGF-VA-23 has the housing from the AGF-VA filter series made from stainless steel and with the respective fittings to adapt it for the coagulation function. The easy installation and the Unique quick-release fastener are additional features of this model.
Even if the particular contaminant has already been removed at the extraction point through effective particle filtration inside the gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination. Additional filters are therefore often installed at the point where the sample gas enters the analysis system and also before delicate system components. The filter housings must be made of corrosion-resistant, non-absorbent materials, easy to install and easy to maintain. They should further be compatible with various filter elements. The AGF-VA-23 series is completely made from stainless steel and features the Bühler Unique quick-release fastener. The filter head has an additional connection for installing a moisture detector. A variety of materials is available based on the application.
PTFE needle valves for fine regulation are indispensable in measurement and control system as well as in analysis and laboratory technology. These needle valves are intended for fine regulation of highly aggressive mediums. The precise spindle adjustment to the valve seat allows for very fine adjustments. The valves can be used for gaseous and liquid mediums.
In specific gas technology applications, high pressure keeps the gas inside the systems. The undesirable disturbance variables also include aerosols in the gas in these types of systems. The aqueous suspended particles can easily be removed from the gas by coagulation using special filter matrices. During this process, the tiny aerosols accumulate on the fibres of the filter matrix through collision, forming drops increasing in size. Once large enough, the condensate which forms drains into the filter bowl and is then removed. Model K-AGF-VA-350 has a stainless steel housing for operating pressures up to 350 bar.
Even in explosive systems in the chemical industry, petrochemistry or biochemistry, gas analysis is key for safe operation. Many of the analysis processes used in these fields require extracting and special conditioning of the sample gas. The P1.3 sample gas pump is the right solution for Atex Zone 2 gases and ambient as well as Cl. 1 Div. 2. Sample gas pumps convey the sample gas from the sampling point to the conditioning system. The main item in these pumps designed specifically for the application is the PTFE single-piece bellow. Combined with the pump head, also single-piece, this solution provides high resistance against particularly aggressive sample gas. Turning the pump head allows gas with condensate to be conveyed without a problem.
In extractive gas analysis the sample gas must be conditioned before it enters the measuring cell of the analyser. One of these conditioning stages is moisture precipitating in so-called sample gas coolers. This condensate must be properly removed from inside the analysis cabinet. In applications where it is not corrosive or toxic, it can then be discharged into drains or channels on site. However, often times it must first be collected for intermediate storage and properly disposed of at a later time. The CV-3 to CV-10 series feature vessels in suitable materials with or without fill level monitor for intermediate storage inside or on the system.
The AGF-PV-30 series features a PVDF and glass housing and is equipped with the Bühler Unique quick-release fastener. The filter head has an additional connection for installing a moisture detector. A variety of materials is available based on the application. Warehouse technology and other areas in food technology frequently require monitoring the composition of the ambient atmosphere. Ensuring reliable analysis results requires conditioning the sample gas. This also includes filtering out any particular matter in the sample gas.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The EGK 1 Ex2 compressor sample gas cooler is ATEX, IECEx and EAC Ex approved and is suitable for operation in explosive zones with up to 2 gas paths.
In sample gas conditioning systems which cannot be pressurised, condensate accumulating in the sample gas coolers must be removed with peristaltic pumps or collected in condensate traps. The GL 1 and GL 2 receptacles have a drain valve and only differ in size. The GL 3 receptacle has a level switch for displaying the fill level or controlling a pump. The drain is a glass thread version into which a drain valve can optionally be installed. All condensate traps are made from Duran glass and PTFE, making them corrosion-resistant.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The EGK 2A Ex is ATEX approved and equipped with up to four separate gas paths is suitable for operation in explosive zones. It has a digital temperature display and alarm outputs.
In the chemical industry, petrochemistry or biochemistry,reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The TC-MIDI sample gas cooler is a component in this conditioning chain if the process or ambient conditions require a higher cooling capacity.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The EGK 4S is a compressor sample gas cooler for up to 8 separate gas paths and is an essential component in sophisticated analysis systems.
(Versions with ATEX 2, IECEx and Cl.1 Div.2 approval) Condensate accumulates when conditioning gas in gas conditioning. It always accumulates when cooling moist sample gas. On one hand this may occur inadvertently if thermal bridges occur in the sample gas lines. On the other hand the deposit of moisture is necessary to protect the measuring cells in the analyser from damage and/ or stabilise measurements. Since the sample gas is often conveyed through the analysis system with suction, the condensate must be pumped off to remove it. So-called peristaltic pumps are particularly suited for this purpose. They systemically protect the sample gas system from external air and based on the hose material used offer high resistance against the often times highly corrosive condensate. Many applications require equipment suitable for explosive areas. This is where CPsingle and CPdouble provides solutions for Zone 2 or Cl.1/Div.2 The CPsingle and CPdouble pump series were developed specifically for these severe operating conditions.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. Many applications require equipment which can be used in explosive areas. This is where the TC-MIDI X2 series provides solutions for Zone 2 or Class I, Division 2. The TC-MIDI X2 sample gas cooler is a component in this conditioning chain if the process or ambient conditions require a higher cooling capacity.
In many applications gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
In many applications gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In many applications gas analysis is the key to safe and efficient control of process flows, environmental protection, and quality assurance. In the extractive gas analysis, the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance, and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterize the extensive GAS probe series.
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. Many applications require equipment which can be used in explosive areas. This is where the TC-Double X2 series provides solutions for Zone 2 or Class I, Division 2.
5-Port Industrial Ethernet Switch 5*10/100Tx, 12-56VDC Power Input
16-Port Industrial Ethernet Switch 16*10/100/1000Tx, 12 – 56VDC Power Input
10-Port Industrial Gigabit Ethernet Switch 8*10/100/1000Tx + 2*100/1000 SFP Slot, 12-48VDC Power Input
8-Port Industrial Managed Ethernet Switch 6*10/100Tx + 2*100Fx, 12-48VDC Power Inputs
12-Port Industrial Gigabit Managed Ethernet Switch 10*10/100/1000Tx + 2*100/1000 SFP Slot, 12-48VDC Power Inputs
6-Port Industrial Unmanaged Ethernet Switch 4×10/100Tx + 2x100Fx, 12-48VDC Power Input
6-Port Industrial Unmanaged Ethernet Switch 4×10/100Tx + 2x100Fx, 12-48VDC Power Input
12-Port Industrial Gigabit Ethernet Switch 8*10/100/1000Tx + 4*100/1000 S FP Slot, 12-48VDC Power Input
8-Port Industrial PoE+ Ethernet Switch 8*10/100Tx with PoE Injector (30W/Port), 48-55VDC Power Input
5-Port Industrial Managed Ethernet Switch 5*10/100Tx, 12-48VDC Power Inputs
16-Port Industrial Gigabit Managed Ethernet Switch 16*10/100/1000Base-T(X)
8-Port Industrial Gigabit PoE+ Managed Ethernet Switch 8*10/100/1000Base-T(X) with Po E-PSE (30W/Port)
6-Port Industrial Gigabit PoE+ Managed Ethernet Switch 4*10/100/1000Base-TX with 4*PoE-PSE(30W/Port) + 2*100/1000 SFP Slot
EB-100C is a fast Ethernet media converter that can support 1 10/100 Base-T (UTR/RJ-45) port and one 100 Base-FX (optical) port to extend the transmission distance up to 20 km. Plug and play design is implemented to ease the installation. Optical transmission can work well in electromagnetic environment, lightning and poor weather condition as well as chemical corrosion to avoid the troubles in electrical cables. the EB-100C is the best solution for your ethernet system. The most common application are in the curb, campus, building, factory, premise, airport, freeway and tunnel.
26-Port Industrial Rack-Mount Gigabit Managed Ethernet Switch 24×10/100/1000Base-T(X) + 2xGigabit Combo Ports (2 x10/100/1000Base-T(X) or 2*1000Base-X SFP Slots)
EB-120 is a media converter that can convert one RS-232 and/or one RS-422/485 ports to be transmitted over a single fiber or two fibers. A DIP switch is used to setup two-wire/ four-wire operation mode and to enable internal termination for RS-422/485 port, and to configure RS-232 port to operate in either DTE or DCE mode. EB-120 series are available in type of compact stand-alone box that can meet versatile field installation demands like on desktop and wall-mount.
7-Port Industrial Unmanaged Ethernet Switch 5*10/100Tx + 2*100/1000 SFP Slo t, 12-48VDC Power Input
10-Port Industrial Managed Ethernet Switch
10-Port Industrial Gigabit Managed Ethernet Switch 8*10/100/1000Tx + 2*100/1000 SFP Slot, 12-48VDC Power Inputs
8-Port Industrial Gigabit Managed Ethernet Switch 4*10/100/1000Base-T(X) + 4*100/1000Base-(F)X SFP Slots
5-Port Industrial Gigabit Ethernet Switch
5*10/100/1000Tx, 12-56VDC Power Input or 18VAC – 36VAC
5-Port Industrial Unmanaged Gigabit Ethernet Switch 4*10/100/1000Tx + 1*100/1000 SF P Slot, 12-48VDC Power Input
8-Port Industrial Ethernet Switch -8*10/100Tx, 12-48VDC Power Input
8-Port Industrial Gigabit Ethernet Switch – 8*10/100/1000Tx, 12-48VDC Power Input
Mini PC X5360 adopts mini desktop computer Intel Core i3 6100u 2.3GHz,3Mb CPU Cache, support 64 bit computing. Mini PC X5360 can run at 24*7 working mode.
Accessories for LIU Box.
Mini PC X5330 adopts mini desktop computer Intel Core i3 3217u 1.8GHz,3Mb CPU Cache,support 64 bit computing. Mini PC X5360 can run at 24*7 working mode.
Mini PC X6620M4 adopts mini desktop computer Intel Bay Trail J1900,quad core 2.0-2.42GHz,supports 64 bit computing. Support 24*7 working mode.
Fiber Patch Panel (LIU) Light interface units are extensively used for wired communication networks. The LIUs are used for routing, terminating and managing optical cable terminations. These light interface units can be Din Rail mounted or rack mounted for ease of use.
Mini PC X5540M adopts mini desktop computer Intel Core i5 4200u 1.6-2.6GHz,3Mb CPU Cache, support 64 bit computing. Mini PC X5540M can run at 24*7 working mode.
P7111 Series is based on wet chemistry analyses, including UV Absorption, Florescence, Colorimetry, Titrimetry, and Ion-Selective Electrode (ISE). It also Complies with international official standards, such as ASTM, U.S EPA regulations, and so on.
Axis Solutions Limited provides the best online water analyzer for simpler and faster water quality measurement. We supply easy-to-use and fully automated water quality measurement equipment suitable for continuously and routine water analysis. Place your order today and be part of our happy group of customers. Axis Solutions Limited was founded in 1999 with the goal of providing high-quality analytical products to customers worldwide. Our headquarters are located at Ahmedabad, India. We continue to grow rapidly by continuously innovating new products that meet emerging needs of the marketplace while still maintaining world-class quality standards. The Company offers a wide range of products including COD BOD pH TSS Analyzer for water quality monitoring as well as many other analytical devices such as Electrochemical Instruments, Spectrophotometers, and Dissolved Oxygen Analyzers etc.
The Axis Air Scrubber helps to protect analyzers from corrosion due to acidic gas stream components, especially NO, NO2, SO2, H2S, HF, O3, VOCs, CO2, CO, etc. The gas scrubbers can be used to generate zero air where NO, NO2, SO2, H2S, HF, O3, CO2, CO, and VOCs in certain limits are present. This can also be installed after the sample gas cooler which ensures no carryover of acid and increases the life of the downstream components, especially the sample cell. The Air scrubber media follow the chemisorption process to remove contaminant gasses from the airline. The contaminant’s gasses remove through adsorption, absorption & neutralization from the main gas. The targeted hazardous gasses are trapped by chemical beads and converted into harmless by-products which remain in the beads. Life depends on factors like the presence of aggressive components, flow rate, and period till the sample passes through the Gas Scrubbers.
The Reliable & Long term operation of an Analyzer depends upon the efficiency of the Sample conditioning system for which moisture-free sample gas is most essential. Axis Demister cools down the hot sample gas to ambient temperature and condenses out the liquid to the source thereby ensuring safety with the precise performance of the Analyzer. Demister must be mounted vertically at the tipping point. There is no filter assembly and drain port so no requirement for Maintenance of filter replacement.
The AXIS Dilution Probe unit is used in analytical technology for processes in which the measuring method or the handling of the process gas or stack gas requires dilution of the measuring gas. The Dilution probe is helpful to measure the sample from the process or stack. It has four different functions to prepare the sample coming from the stack, so it can be measured precisely by the analyzer. The dilution probe uses an air-driven aspirator that extracts samples from the stack or process. After extraction, the sample passes through the coarse filter, fine filter, and orifice which is made from glass or metal and is finally diluted with the air from the aspirator. This aspiratory process now reduced the dew point of the sample to near the ambient temperature. It prepares the sample for measurement. It can be transported sample up to 90 feet away without heating.
In any power plant measurement of emissions, and gases is critical. In many cases, measurement of emission gases stack sample should be diluted by using zero air before supplying to the analyzer. Axis makes Dilution Probe controller DPC001 is used with a Dilution probe to measure stack emissions released in coal-fired power plants. Regulating zero air by pressure regulator controller supplies dilution air to the probe. The dilution probe mixes the zero air with the sample as per the dilution ratio and supplies the diluted sample back to the Controller. With help of the flow meter(s), the needle valve controller will supply diluted samples to Analyzer(s) as per its requirement. A vacuum gauge is fitted in the controller to monitor the condition of the Dilution probe. Axis makes a Dilution probe controller that offers up to five calibration gas selections by manual rotary switch or remote contacts.
AXIS makes Peristaltic Pumps that are used for draining the condensate from the Sample gas cooler. Condensate discharge from the sample gas cooler needs to be drained. Peristaltic Pumps are the ideal solution for systems operating under negative pressure. PP-01 needs low maintenance as there are no valves, glands & seals therein. It becomes comparatively inexpensive to maintain.
The reliable and long-term operation of any process analyzer depends upon the efficiency of the sample conditioning system for which dust, Solid particulate, and moisture-free sample gas is essential. Sample gas Coalescing Filter (SGCF1) is equipped with an efficient filter to filter out liquid aerosols and drain out the water droplets. Any Liquid aerosols or droplets are caught within the fine inner layer eventually accumulating to the extent that they are forced to the outer layer of the filter element and drain out through the drain port The folded construction of the filter and compatibility of the design filter components like filter top, filter element, and filter body is designed in such a way as to ensure easy mounting and trouble-free maintenance.
In the portal, the analysis system sample must be free from dust and contamination. Consistent and long-term operation of any process analyzer depends upon the sample conditioning system which must be free from dust and solid particulate. The conditioning system must be lightweight and compact which is why require small components. Axis brings special filter housing (SGF-2) for these kinds of applications, also installed in a 19” rack system. This SGF-2 is screwed into the front panel and sample connections at the backside. Easy to remove or replace filter elements when required.
Axis Zero Air Generator produces purified air at a different rate. ZAG removes CO, CO2, NOx, SOx, water vapor, VOCs, acid vapors, O3, NH3, chlorine, and dust. This unit is self-contained in a convenient, lightweight. ZAG converts Atmospheric air into clean air, suitable for instrument calibration. Zero Air Generator reduces all the inconveniences and costs of cylinder gas supplies and dependence on outside vendors. ZAG offers long-term product stability. Axis brings you the Zero Air Generator Unit to meet diverse and exacting demands which run trouble-free for 24 x 7 days in the laboratory, Refinery, and Petrochemical Industries where it can provide reference gas in various application like Gas Chromatography, FID, Ambient air monitoring system, etc.
Axis Dome loaded Pressure regulator is designed to deliver continuous & precise control to the further system. It is a single stage pressure control regulator. It is mainly used in instrumentation & processing system for all types of Gas media applications. Used in Oil and gas refineries, power, chemical, and any type of process industries Many features of the dome loaded pressure regulator which makes it suitable for a variety of application. It can be used for gasses like, O2, N2, Ar, H2,C2H2, CO2, N2O and many more. It has a wide operating range of up to 400 bar and up to 170°C media temperature can be sustained.
The PPRV pilot-operated is a downstream pressure regulator, pilot-controlled, for medium and high-pressure applications. Specially designed for natural gas transmission/ distribution systems and industrial/commercial applications. The Type PPRV provides smooth, quiet operation, tight shutoff, and long life, even in typical conditions. The accuracy of the regulated pressure, the high rangeability ratio, together with the fast adaptation changes in the operating conditions, even in the presence of abrupt changes in the flow rate, make the regulator PPRV particularly suitable for use in gas supply installations of electric power generation stations. The Design of the PPRV allows any installed units, to be updated or upgraded during the entire lifetime of the regulator as the operating requirements or any changes in the customer’s specifications are modified. PPRV is a top-entry design, this allows for ease and cost effective maintenance without dismantling the regulator body from the line. The modular design allows a wide variety of configurations to suit the most demanding applications in gas transmission, gas supply to the industrial power plant, city gates, distribution utility systems, industrial installations, etc. The operation of the regulator PPRV is assured by a piloting system consisting, as a basic option, of two separate devices: the Pre-regulator and the Pilot
Axis Pressure regulator is designed to deliver continuous & precise control to further system. It is single stage pressure control regulator. It is mainly used in instrumentation sample handling system for all type of Gas media application. Used in Oil and refinery, power, chemical and any type of process industries. Many features of the PRG4HP make it ideal for wide range of applications controlling pressures at low to adequate flows in gas media. It has wide operating range up to 400 bar and up to 170°C media temperature can be sustained. PRG4HP can also be used for water application.
PRG5 represents the pinnacle of precision and advancement in pressure regulation technology. Unlike its predecessors, PRG5 ensures that even in the face of fluctuating inlet pressures, the outlet pressure remains unwaveringly constant. Its unparalleled accuracy and stability make it the preferred choice for industries where precision is paramount. Used in Oil and refinery, power, chemical and any type of process industries. It has wide operating range up to 300 bar and up to 170°C media temperature can be sustained. PRG5 Models can also be used for water, Gas & Steam application.
Reliable and long term operation of any process analyzer / Gas chromatograph for oil and refinery plants depend upon the efficiency of the sample conditioning system for which sample should be conditioned as per pressure, temperature, flow and dew point.
The Brix offers very reliable Enclosure Fan Heaters to be used to maintain the certain temperature or dew point inside the enclosure or panel by force convection in the analytical instrumentation and control application for oil and refinery plants.
The Brix Enclosure Fan Heaters are constructed according to Special designed Heat Sink profile with Cartridge Heaters & Metallic cable glands with assembled. Enclosure Heaters must have powered by separate Safety devices like MCBs , Contactors , terminal box ( scope of others ). Temperature controlled devices should be in others scope to control the desired temperature set value.
Reliable and long term operation of any process Analyzer / Gas chromatograph for oil and refinery plants depend upon the efficiency of the sample conditioning system for which sample should be conditioned as per pressure, temperature , flow and dew point.
The Axis offers very reliable Flameproof Heaters to be used in potentially explosive atmospheres ( Directive 94 / 9 / EC ) to maintain the certain temperature or dew point inside the enclosure or panel by natural convection in the analytical instrumentation and control application for oil and refinery plants.
The Axis flameproof Heaters are constructed according to protection type Ex d, flameproof encapsulation with Cartridge Heaters & Flameproof certified cable glands with assembled heat sink unit. Flameproof Heaters must have powered by separate flameproof Ex d, IIC certified Junction box ( scope of others ). Temperature controlled devices should be in others scope to control the desired temperature set value.
Reliable and long term operation of any process Analyzer / Gas chromatograph for oil and refinery plants depend upon the efficiency of the sample conditioning system for which sample should be conditioned as per pressure, temperature , flow and dew point.
The Axis offers very reliable Enclosure Heaters to be used to maintain the certain temperature or dew point inside the enclosure or panel by natural convection in the analytical instrumentation and control application for oil and refinery plants.
The Axis Enclosure Heaters are constructed according to Special designed Heat Sink profile with Cartridge Heaters & Metallic cable glands with assembled. Enclosure Heaters must have powered by separate Safety devices like MCBs , Contactors , terminal box ( scope of others ). Temperature controlled devices should be in others scope to control the desired temperature set value.
HTC series humidity and temperature sensors are designed for environmental monitoring and control applications in industrial, commercial and general building. These sensors can be used for discharge, or return air control. HTC sensor convert humidity data in to standard analog output 4-20mA / 0 -10Vdc / (RS485 Modbus RTU Optional) Relay Output & WiFi.
The ASPL - ATEX certified flameproof enclosure are constructed according to protection type Ex-d, flameproof standard, standard components such as switches, contactors, motor protection circuit breakers and relays are mounted in an explosion proof enclosure constructed in such a way as to keep internal explosions from igniting the surrounding atmosphere.
Ex-d enclosure are usually custom - built in close cooperation with the customer himself for his special application. Flame proof enclosure is available either with direct cable - entries through Ex-d certified cable glands or Ex-d certified blind plugs.
FRP (Fiber Reinforced Polymer) Shelter is a modular type shelter room used in the Desert area. It can be used for critical environments where sample measurements are very sensitive and should be in a protective environment like normal temperature, less moisture, etc. Traditionally metallic shelters can be used but chances of heat leakage are very common. So it can contaminate the operating conditions of the analysis system.
Fiber-reinforced Polymer is the best solution which can have 3 orders less thermal performance than metal which can give better thermal protection. Also, it can have a 25% lesser weight than the normal metal providing a high strength-to-weight ratio compared to metal. FRP shelter is made from a single piece (6 sides) of FRP material which will be joined with another panel with the help of fasteners. FRP panel is the sandwich type (FRP + PUF + FRP). The PUF insulation provides high thermal resistance. The Panel will be 1 m (Width) x 3m (Height) in size but different in thickness from 40 mm to 100 mm available.
FRP shelter provides long-term durability. The use of a gel coat will protect the FRP sandwich panel from the harsh environment. The shelter provides Ingress protection (IP) with smooth fiber with eroded fibers which will give longer life.
FRP shelter is made from a Metallic structure mainly made from ISMC channels, base is covered with AL or Steel chequered plate & insulated. Also, there are vertical columns*. On base, FRP panels will be arranged with the help of fasteners. The roof will be made from 3m long Single FRP panels with high load distribution and a 1” slope from the longer side. The door is made from the FRP sandwich structure with all the accessories like the panic bar, door closures, and glass windows. The lifting bracket provided on the base or on the vertical column depends on the shelter size and load.
FRP shelter can be provided the best solutions for sensitive applications. Also, it can be used for a passive cooling shelter which can provide cooling with zero energy.
ABSI Series Smart I/O Modules are highly versatile devices designed for monitoring and controlling applications in industrial and other commercial environments. These modules are ideal for data acquisition from various analytical sensors like pH, Chlorine, Turbidity, and Conductivity and provide control action through relay output.
THT series humidity and temperature transmitters are designed for environmental monitoring and control applications in industrial, commercial, and general buildings. These transmitters can be used for discharge, or return air control.
THT transmitter converts Temperature and humidity data into standard analog output 4-20mA (RS485 Modbus or Wifi / GSM over MQTT on request)
Axis Solutions Limited is a trusted name in providing advanced industrial solutions. We take pride in our Temperature and Humidity Transmitter, an essential tool for maintaining optimal environmental conditions. It accurately measures and transmits data on temperature and humidity, enabling businesses to monitor and control these crucial parameters effectively. Whether it's in a laboratory, manufacturing facility, or storage warehouse, our Temperature Humidity Transmitter ensures your operations run smoothly. With its high precision, robust design, and easy integration, it's no wonder Axis India is the go-to choice for Temperature Humidity Transmitters. Trust Axis India to provide the reliable, high-quality tools you need to maintain the perfect environment for your business.
Rhosonics has launched the 3rd generation of the Slurry Density Meter, the SDM ECO. The SDM ECO incorporates over 1,000 installations and almost 20 years of on-site experience. The SDM ECO serves as guard of your process and is powered by safe non-nuclear technology, it is contributing to a new era of mining, where safety, sustainability, and operational excellence come first.
The Rhosonics CCM stands for Chemical Concentration Meter and this category of instruments allows measuring the concentration of chemicals and solutions in real-time. The CCMs are designed to withstand many different chemicals and to match harsh process conditions.
The Model 3110 represents the new generation of portable trace and percent oxygen analysis capability. The 3110 combines a rugged, portable Analyser design with the high reliability of Teledyne trace and percent level sensors. This ensures highly accurate ppm/percent oxygen readings in a variety of background gases - including hydrocarbons. The batteries supply at least 100 hours of continuous power to the Analyser, with a low-battery indicator LED. The Analyser includes quick-disconnect fittings to take measurements without hassle and can be equipped with an external sample system. The micro processor based electronics provide accurate, high resolution readings and easy-to-use features.
The Rhosonics CDM stands for Chemical based- slurry Density Meter and that category of instruments allows measuring density in realtime. The CDMs have a robust design with sensors that are made of highly corrosion and abrasion-resistant materials to withstand rough process conditions.
Teledyne’s Carbon Dioxide Quality Control (CDQC) system offers an integrated package to continuously monitor impurities in carbon dioxide (Co2). The plug-and play design allows for the user to select only the gases and features of interest to maximize cost benefit and space. Front door viewing windows allow for view of all Analyser displays, flow and pressure settings. Stainless steel tube fitting connections and NPT or metric electrical ports as required are conveniently located in a central location for ease of access. Sample conditioning, utility gas provisions and integral calibration gas solenoid valves are standard.
The Series 2000 represents a complete line of Thermal Conductivity Detector (TCD) based Analysers which can be applied in a wide range of applications and industries. By using field proven filament-based and semiconductor based TC detectors, Teledyne is able to continuously monitor hydrogen and a variety of other gases of interest in either binary or multi-component sample gas streams.
Laser based moisture Analyser for gases The Aurora uses tunable diode laser absorption spectroscopy (TDLAS) to quickly and accurately measure moisture in gases, with speed of light Panametrics Aurora Analyser uses tunable response and minimum maintenance requirements.
Single-channel moisture analyser for measurement in gases An economical, single-channel, aluminium oxide hygrometer in the IQ Series line of analysers. It is intended for industrial applications requiring accurate, real-time moisture measurement.
The DewPro MMR30 is a compact, mid-range moisture transmitter designed specifically for refrigeration dryer manufacturers and users. The DewPro MMR30 measures dew point at line pressure or atmospheric pressure and installs easily on a dryer outlet header. The DewPro MMR30 uses a proven polymer capacitive sensor to provide a measurement range of 5°F to 185°F (-15°C to 85°C) with ±1.8°F (±1.0°C) accuracy. The optional integrated display with user interface provides full programming and diagnostic capability.
The DewPro MMR31 loop-powered moisture transmitter represents a simple, cost-effective solution for mid-range moisture measurements. The DewPro MMR31 uses a proven polymer capacitive sensor to provide a measurement range of 0 to 100% RH with an accuracy of ±2% in the range of 0 to 90% and ±3% in the range of 90 to 100%. A patented second isolated loop for temperature measurement is also available. The optional integrated display with user interface provides full programming and diagnostic capability. In addition, the unit is available with FM approval for hazardous area use. The DewPro MMR31 provides a wide range of process humidity measurements, including relative humidity, dew point temperature, absolute humidity, and mixing ratio. These key parameters will help monitor and control critical processes. Whether you need to improve product economy, increase product quality, maintain comfort levels, or preserve the properties of stored foods or other supplies, the DewPro MMR31 allows application flexibility.
The DewPro MMR101 is a high-temperature loop-powered moisture and temperature transmitter. The transmitter is housed in a Type 4X/IP67 enclosure and features a simple two-wire or four-wire connection. The DewPro MMR101 uses a proven polymer capacitive sensor to provide a humidity measurement range of 0 to 100% RH with an accuracy of ±2% up to 149°F(65°C). A platinum RTD temperature sensor delivers temperature measurements in the range of 32°F to 300°F (0°C to 150°C). The optional integrated display with user interface provides full programming and diagnostic capability. In addition, the transmitter is FM approved instrinsically safe/explosion-proof for use in Class I,II,III, Division 1 and 2, Groups A,B,C,D,E,F&G hazardous (classified) locations. With an operating temperature up to 300°F (150°C), the DewPro MMR101 is ideally suited for the harshest applications. The transmitter can report moisture content in relative humidity, dew point temperature, absolute humidity, and mixing ratio. Applications include food processing, high temperature solids drying, paint and coating/finishing processes, pharmaceutical processing, and other industrial applications.
Multi-channel moisture analyser for measurement in gases and liquids The flagship analyser of the IQ series is designed for installation in a control room or field setting, providing complete functionality where single or multiple measurements are required, for both moisture and oxygen analysis.
The HygroProII moisture transmitter is an intrinsically safe, compact, loop-powered display transmitter designed specifically to meet the demands of rugged industrial applications. With certified intrinsically safe electronics (when installed with appropriate associated apparatus) packaged in an IP66/IP67/Type 4X enclosure, the HygroProII is ideal for use in pipeline natural gas, petrochemical, power generation, and other industrial gas or hydrocarbon liquid applications.
Optica Series chilled mirror hygrometers offer National Institute of Standards and Technologies (NIST)—traceable humidity, temperature and pressure measurements for the connected generation. Now data is accessible from anywhere, any time, from within a browser over the Internet or from your Intranet.
Chilled mirror hygrometers are used in standards and metrology labs as well as in industrial applications where precise and repeatable humidity measurement and control are required. The inherent accuracy and long term stability provide many advantages over other types of humidity measurement technologies.
Highly reliable and cost effective oxygen measurement, all in a compact intrinsically safe package Designed for installation flexibility, the oxy.IQ is a two wire loop powered transmitter with 17 percent- and ppm-level oxygen ranges. oxy.IQ combines proven sensor technology, an intuitive user interface, and a compact design in an intrinsically safe package perfect for oxygen measurement in a variety of background gases.
The XDP explosion-proof display provides the measurement of percent or ppm oxygen or hydrogen gas. The explosion-proof XDP is certified for use in Class 1, Division 1, Groups B, C and D as well as Zone 1 ATEX/IECEX Ex d IIC T6 Gb hazardous areas. The XDP features advanced microprocessor-based electronics, a magnetic, through-the-glass keypad, a universal power supply (magnetic), one 0/4 to 20 mA or 0 to 2 VDC analog output, four process alarms, and a fault alarm.
Panametrics’ XMTCpro is a compact, and robust analyzer with SIL 2 by design for continuous measurement of gas concentrations in binary gas mixtures, including hydrogen, carbon dioxide, methane, helium, and many others.
Delivering ultra-stable, trace oxygen analysis in industrial gas applications The Delta F non-depleting, coulometric oxygen sensor provides ultra-stable oxygen measurement and requires only an annual span calibration. Combined with Panametrics’ moisture.IQ, this offers a cost effective six-channel solution for multipoint oxygen measurement covering ppm and ppb measurements. The Delta F sensor is particularly suited to applications requiring high sensitivity measurements for process control.
The VeriDri moisture transmitter provides dryer manufacturers and other OEMs with the means to make simple, accurate and reliable moisture measurement of their gas at a competitive price. VeriDri is a loop-powered 4 to 20 mA output transmitter, offered in a number of factory-configured output ranges covering an overall moisture range of -130°F to 70°F or -110°C to 20°C dew point temperature. It is also available in a number of PPMv moisture output ranges with an overall range of 0 to 10,000 PPMv moisture, when operating at a constant pressure. Operating pressure information must be provided to the factory at the time of order placement.
The PM880 hygrometer is a complete, intrinsically safe, portable system with options and accessories to meet all industrial moisture measurement needs. This hygrometer is small, lightweight, and easy-to-use. The large LCD displays moisture readings in dew point (°C or °F), ppmv, ppmw, lb/MMSCF (natural gas) and a variety of other unit options. Data can be viewed in alphanumeric or graphic formats. A rechargeable battery pack and battery charger make this the ideal go-anywhere moisture analyzer.
The TMO2D is an optional display and control module that enhances the performance and operation of transmitters such as the XMO2, XMTC or OXY.IQ. It provides a two-line x 24-character backlit LCD display, display and option programming via keyboard, recorder outputs, alarm relays, and relays for driving sample system solenoids for automatic zero and span calibration, as well as a 24 VDC power supply for the transmitter.
The TransPort PT900 is the latest generation of portable clamp-on flow meters from Panametrics line of ultrasonic meters. It capitalizes on the ruggedness and superior performance of its predecessor, the TransPort PT878, but delivers a whole new level of intuitive and user-friendly capability based on today’s technology.
Thanks to the perfectly matched interaction between the paramagnetic oxygen property and temperature, the Safety Integrity Level (SIL) certified XMO2pro is contamination resistant, requires minimal maintenance and needs no consumables. This makes it the ultimate choice for highly accurate oxygen measurements for widespread use in harsh environment industrial and oil & gas applications.
The DewPro MMY30 is a loop-powered transmitter with 4 to 20 mA output. The DewPro MMY30 is specifically designed to measure dew point or ppm in gases at line pressure or atmospheric pressure. The planar aluminum oxide sensor provides excellent corrosion resistance, longer calibration stability, quick response times, and an exceptionally low temperature coefficient. The optional integrated display with user interface provides full programming and diagnostic capability. The DewPro MMY30 features an integral flow cell for filtration and flow regulation making it ideal for monitoring the moisture content in various process environments. Several options are available for the process connection allowing easy installation of the transmitter. Applications include desiccant air dryers, pipeline natural gas and industrial gases.
The DewPro MMY31 measures dew point or ppmv in gases. It is a cost-effective, loop-powered dew point transmitter designed for “in-line” installation where trace moisture measurement is required. The planar aluminum oxide sensor provides excellent corrosion resistance, longer calibration stability, quick response times, and an exceptionally low temperature coefficient. The DewPro MMY31 mounts directly in-line in your process gas, where a bypass installation is not appropriate. It is easily installed via a variety of adjustable insertion length compression fittings. The optional integrated display with user interface provides full programming and diagnostic capability. Applications include glove boxes, environmental chambers, test chambers, and other locations where direct insertion is required.
Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Velocity, Top Exit 2 Pin Connector.
Nonincendive, Intrinsically Safe, CSA North America Class 1, Division 1 and IECEx/ATEX Zone 0,1 Approved Loop Power Sensor,4-20 mA Output Proportional to Vibration in Velocity, Top Exit 2 Pin Connector
The DES 24 cable entry system consists of a splittable frame designed to accommodate small (SPP), multiple (X) or large (SPG) grommets for cables with and without connectors. The grommets can be freely positioned into the frame. With all combinations of grommets, single, double, quadruple, big, the IP66 and NEMA 4X* are guaranteed. The overmolded gasket guarantees faster installation times and the complete V0 self-estinguishing of the system.
The DES 16 cable entry system consists of a splittable frame designed to accommodate small (SPP), multiple (X) or large (SPG) grommets for cables with and without connectors. The grommets can be freely positioned into the frame. With all combinations of grommets, single, double, quadruple, big, the IP66 and NEMA 4X* are guaranteed. The overmolded gasket guarantees faster installation times and the complete V0 self-estinguishing of the system.
The DES 10 cable entry system consists of a splittable frame designed to accommodate small (SPP), multiple (X) or large (SPG) grommets for cables with and without connectors. The grommets can be freely positioned into the frame.With all combinations of grommets, single, double, quadruple, big, the IP66 and NEMA 4X* are guaranteed.The overmolded gasket guarantees faster installation times and the complete V0 self-estinguishing of the system.
The DES Q cable entry system consists of a splittable frame designed to accommodate small (SPP), multiple (X) or large (SPG) grommets for cables with and without connectors. With all combinations of grommets, single, double, quadruple, big, the IP66 and NEMA 4X* are guaranteed. The overmolded gasket guarantees faster installation times and the complete V0 self- estinguishing of the system.
The DES L1, L2, L3 cable entry system consists of a splittable frame designed to accommodate small (SPP) grommets for cables with or without connectors. With all combinations of grommets, single, double, quadruple, the IP66 and NEMA 4X* are guaranteed.The overmolded gasket guarantees faster installation times and the complete V0 self- self-estinguishing of the system.
The DES L1, L2, L3 cable entry system consists of a splittable frame designed to accommodate small (SPP) grommets for cables with or without connectors. With all combinations of grommets, single, double, quadruple, the IP66 and NEMA 4X* are guaranteed.The overmolded gasket guarantees faster installation times and the complete V0 self- self-estinguishing of the system.
The DES L1, L2, L3 cable entry system consists of a splittable frame designed to accommodate small (SPP) grommets for cables with or without connectors. With all combinations of grommets, single, double, quadruple, the IP66 and NEMA 4X* are guaranteed.The overmolded gasket guarantees faster installation times and the complete V0 self- self-estinguishing of the system.
The DES L4/L5 cable entry system consists of a splittable frame designed to accommodate small (SPP) grommets for cables with or without connectors.With all combinations of grommets, single, double, quadruple, the IP66 and NEMA 4X* are guaranteed.The overmolded gasket guarantees faster installation times and the complete V0 self-estinguishing of the system.
The DES L4/L5 cable entry system consists of a splittable frame designed to accommodate small (SPP) grommets for cables with or without connectors.With all combinations of grommets, single, double, quadruple, the IP66 and NEMA 4X* are guaranteed.The overmolded gasket guarantees faster installation times and the complete V0 self-estinguishing of the system.
The DES FT splittable frames are equipped with threaded inserts and with front taps which allow the installation on the rear part of the panel and keep the front part clean avoiding dirt accumulation. All the other technical data of the DES FT frames are exactly the same of DES Series.
The 90° cable entry system DES24-90 is used when the machinery construction does not allow the straight cables entrance, or when a nice design is requested.This cable entry system is suitable for both cables with or without connectors and corrugated conduits, or a mix of them. The grommets can be freely accommodated into the frame.
The DES 24M splittable frame allows up to 40 cables with or without connector or one or two cables up to 35mm diameter to pass through electric cabinet or machines panels. The small and big grommets can be freely positioned inside the frame. The DES 24M frame is the base structure for the expandable MX version
The DES 24MX15 splittable frame allow up to 60 cables with or without connector or one or two cables up to 35mm diameter to pass through electric cabinet or machines walls.The small and big grommets can be freely positioned inside the frame. The DES 24MX15 is tightened thanks to three stainless steel screws on the right side.
The DES 24MX splittable frames family is a modular solution for installations where a big quantity of cables need to be routed through electrical cabinets walls or panels.This solution is not only modular but it is also a general result that can be adopted as main cables entrance. Both cables with or without connector can be routed (40 for each module) and future updates can easily be organized in the cheapest and fastest way.
The DES 16M splittable frame allow up to 32 cables with or without connector or one or two cables up to 35mm diameter to pass through electric cabinet or machines panels.The small and big grommets can be freely positioned inside the frame.The DES 16M frame is the base structure for the expandable MX version.
The DES 16MX splittable frames family is a modular solution for installations where a big quantity of cables need to be routed through electrical cabinets walls or panels.This solution is not only modular but it is also a general result that can be adopted as main cables entrance. Both cables with or without connector can be routed (32 for each module) and future updates can easily be organized in the cheapest and fastest way.
The DES 24 CLICK splittable frame allows to accomodate up to 40 cables with or without connectors with diameters from 2 to 31 mm. The frame is firmly closed with two side hooks. The frame accepts 10 small grommets or 1 big grommet and 6 small grommets.
The DES 16 CLICK splittable frame allows to accomodate up to 32 cables with or without connectors with diameters from 2 to 32 mm.The frame is firmly closed with two side hooks. The frame accepts 8 small grommets or 1 big grommet and 4 small grommets.
The DES 10 CLICK splittable frame allows to accomodate up to 24 cables with or without connectors with diameters from 2 to 32 mm.The frame is firmly closed with two side hooks. The frame accepts 6 small grommets or 1 big grommet and 2 small grommets.
The DES Q CLICK splittable frame allows to accomodate up to 16 cables with or without connectors with diameters from 2 to 32 mm.The frame is firmly closed with two side hooks. The same frame accepts 4 small grommets or 1 big grommet.
The DES 380 splittable frame family includes the DES 380M and MX and is a modular solution for big size cables and corrugated pipes installations on electrical cabinets or machinery.The system allows cable or corrugated pipes with diameter from 36 to 66 mm diameter to be secured in the cabinet entrance with fast and strain relief fixing.The DES 380M is the base product for increasing the number of cables thanks to the modular capabilites of the 380 MX system.
The splittable DES 380MX frames are used for routing big diameter cables and corrugated pipes through electric, machinery or main cabinets.The solution is modular meaning that the customer can buy the 4 frames solution for using them for 4 or less cables. Then he can add an accessory and increase easily the number of cables limitless.
The DES COVER plates allow to protect the unused gaps in the cabinet, avoiding contact with the outer environment.
The IFP inserts are designed to be installed in Entry Plates of Group 2 or in SPG M grommets, with diameters from 4.5 to 22.5 mm.
This engineering box contains 168 pcs of small SPP grommets, grey or black.
The SPCL engineering box contains 212 pcs small SPC and SPL grommets, grey or black. The full range of grommets is included.
DES CAPS keep the product clean from the front, preventing dirt from settling in the screw seats.
The ISP series grommets are designed to fit into SPP and SPC grommets with diameters from 2 to 16mm.
The DDMD divisible locknuts allow the pass through of connectors which are dimensionally larger than the conventional locknuts. Six sizes are available, all for metric threads.
This locknut allows the pass through of SUB-D9 connectors (DVI or PROFIBUS), in the case of using a M32 cable gland,simplify machinery wiring. Available on demand and suitable to: DESCLICK 32, DESPRED 32, DESPRED ZZ 32, OSF 32.
The DES FLAP solution enables the DES 24, 16, 10 and Q frames to be installed with a quick snap-in connection.The FLAP frame, once installed, hooks over the split frame and is the best solution for a flexible installation. Enclosures can be later inspected quickly and easily be dismantled.
The snap cable entry system take to several advantages. Sometimes the available space is limited and is not possible to install multiple frames vertically or horizontally. Thanks to the snap modules the hook supports can be easily mounted and the frame, separately assembled and correctly closed, is quickly inserted into the module.
The SPC cable grommets are openable grommets which can be used into the OSF or DES “XX” CLICK series for routing preterminated cables with diameters from 2 to 14 mm. The 2X and 4X allow multiple cables to be routed into the same cable gland.
SPH series grommets allow casbles with diameters between 36 and 65 mm to be routed inside the DES 380M and and DES 380MX series split frames.
The SPG Y is a large grommet which can be used to adapt small grommets, single, multi-hole or special. They are used in divisible cable glands of the Despred 63 or 50-90 families to improve the cable outlet or in the DES frames to reduce the number of blind grommets
The SPG W grommets allow the integration of panel connectors/sockets (Ø 20 and 22 mm, M12, M25, M23 flanges, openable square flanges, feedthrough, quick inserts for pneumatics, etc.) directly on the DES frames. The advantage is the modularity of the system that allows quick connection and release of cables (data, power, pneumatics, etc.) without opening the machine panel. This plug-in system facilitates the design of increasingly modular machines.
The SPG W22 grommets allow the integration of panel sockets (USB, RJ45 etc...) directly on the DES frame. The advantage is the modularity of a system that allows the quick coupling and release of data cables without the need to open the machine panel, as well as the guarantee of maintaining a high degree of protection. This plug-in system facilitates the design of increasingly modular machines.
The DES 24 CLEAN is composed of the popular DES 24 divisible frame and an FDA PC mask that is secured to the frame itself via molded threaded co-molded screws. The combination is designed for food industry application.
Funcional box containing 163 shielding clamps with different sizes and shape. Thanks to the wide choice, it is possible to select the most suitable model for the specific occasion.
The SPG M grommets enable a high number of cables to be installed in the DES splittable frames. The cable is pushed through the front membrane, whilst the second membrane increases the strain relief and liquid resistance. SPG M ATEX series can be used in zone 2 and 22.
The SPG P ATEX grommets are suitable for cables without connectors. They are used cutting the cone corresponding to the diameter of the cable. The cable is then routed into the grommet where the internal shape is increasing the strain relief. Is it also possible to secure the cable with a cable tie.
Teledyne’s Model 3000MA Paramagnetic Percent Oxygen Analyzer is a versatile, microprocessor based instrument specifically designed to detect oxygen in a variety of gases. The 3000MA is a precise, cost effective instrument capable of measuring percent oxygen in as low as the 0-1% range. Drawing on the solid performance of Teledyne’s highly successful 3000 series control platform, the 3000MA provides the user with a wide variety of features and options to satisfy virtually any application.
Teledyne’s Model 3010TA Trace Oxygen Analyzer is a versatile microprocessor-based instrument for detecting oxygen at the parts-per-million (ppm) level in a variety of gases. The 3010TA is designed as a “split architecture” instrument, meaning that a general purpose Control Unit for non-hazardous areas controls a specially designed Analysis Unit or “remote probe” that can operate in hazardous areas. Simple menu choices, membrane command switches and dual LCD and LED displays make set-up and operation clear and quick.
Good things come in small packages, and Teledyne’s 3190 Trace or 3290 Percent Oxygen Analyzer proves it. These microprocessor based units offer high accuracy, easy use, and all the standard features demanded by the end-user in a compact, budget priced design. Membrane command switches and a large, four digit LED display make setup and operation clear and quick. For the latest technology, Teledyne quality, and an unbeatable value, the 3190 or 3290 provides a pocket-sized solution.
Because of its relatively high sensitivity to most organic compounds, the flame ionization detector is a powerful tool for measuring hydrocarbon impurities in other gases. It also provides a linear response over a wide range of analysis. The figure shows the general construction of an FID. Organic compounds from the sample stream or separation column are injected into the detector housing where they are mixed with Hydrogen and air before entering the detector jet where the mixture is burned. During this process, organic compounds are broken down into carbon fragments and acquire a positive charge (i.e., become ionized) at the surface of the anode. Carbon fragments are detected by the collector. The signal is then amplified and sent to the data processing system.
The flexibility, simplicity and robustness of the proven universal InstaTrans Oxygen Transmitter is carried on to the next-generation Model InstaTrans-XD. The new platform continues to offer the benefits of the legacy transmitter The InstaTrans-XD utilizes a design to meet the requirements of NEMA-4 (IP-66) levels of ingress protection with wetted 316SS cell compartment body and fittings. The transmitter head contains the electronics and user display interface including 4-button design to access functions.
Enable accurate and continuous monitoring of ambient air quality with a fully integrated AAQMS solution. Designed with automatic calibration and CPCB connectivity, the system measures key environmental pollutants and meteorological parameters in real-time. Housed in a robust shelter, it ensures reliable performance for environmental compliance, data reporting, and public safety initiatives.
Brix series ULT-200B is a Battery Operated Ultrasonic Level Transmitters specially designed for non-contact type level measurement. Ultrasonic level measurement is based on the transit time technology which calculates the time required by ultrasonic pulses to travel from sensor & surface of liquid & back to sensor. Ultrasonic level transmitters are the best for applications such as slurries, corrosive liquids & waste water without obstacle throughout the beam. The transmitter provides local indication through LCD. The measuring range is available up to 12 mtrs.
Brix series MAG-200 are micro-controller based full bore type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measure the flow rate of conductive liquids and slurries in closed pipes. Due to its simple and rigid design, the flow meter is an obstruction less and maintenance-free instrument in place of conventional mechanical flow measuring devices. The use of ‘Pulsed DC’ technology offers highest ability and better measuring accuracy in the form of electrical signal 4-20 mA DC linearly proportional to volumetric flow. The instrument is based on Faraday’s law of electromagnetic induction. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring flow range.
Brix series TT-01 are head mount type temperature transmitters used for various industrial applications. It can accept input from RTD, J & K type of thermocouples & temperature signal is transmitted in the form of electrical 4 – 20 mA signal. Span / Zero adjustments are easily accessible. These transmitters are suitable for any make of sensor.
Brix series HSLT-22 are electronic Level transmitters for fast, easy & trouble free operation. These transmitters are designed to cover a majority of industrial applications. Electrical output in the form of 4-20 mA DC proportional to level is transmitted with operating voltage of 24 V DC. All wetted parts are stainless steel. A robust design for applications in wastewaters and sludges or a design free of metal with long-term stability for usage in salt water is also available.
Brix series PT-22 are Digital Pressure Transmitter for fast, easy & trouble free operation. These transmitters are designed to cover the majority of industrial applications such as clear Gases & Liquids. Electrical output is in the form of 4-20 mA DC proportional to the Input Pressure. All wetted parts are stainless steel & hermitically welded.
Brix series DPT100S micro-controller based design which has capacitive type pressure sensing element. is suitable for Differential Pressure measurements. It is used for various industrial applications. It can be used for Liquid, Gas & Vapor pressure measurements. It is having wide ranges of pressure with high accuracy & linearity output in the form of electrical signal 4-20 mA DC with HART communication.
Brix Series TT04 are temperature transmitters used for various industrial applications. It can accept input from RTD, all types of thermocouples & temperature signal is transmitted in the form of electrical 4 – 20 mA signal. The on-line temperature indication is provided through LCD. Span / Zero adjustments are easily accessible .
Brix series UF400 Ultrasonic flow meters give the flexibility to install a reliable flow meter, virtually anywhere, without distorting accuracy and performance. The flow meter is extremely easy to use, simple to install and requires no regular maintenance. The product is engineered for various industrial as well as domestic applications such as Municipal and Industrial Water applications, Cooling tower, Water treatment, etc. The LCD display provides indication for flow rate and totalized flow with key selection. The display auto shuts off after 10 minutes, which increases the battery life in case of battery powered flow meter. The display can be turned ON by pressing the ‘enter’ key.
The Smart Controller Series transmitters are versatile single and multi-channel devices designed for the precise measurement and control of various parameters such as pH, ORP, conductivity, turbidity, and chlorine in safe area applications. These applications span a wide range of industries, including chemical, pharmaceutical, pulp & paper, mining, and water treatment plants.
What sets the Smart Controller apart is its adaptable design, allowing it to work seamlessly with any of the available sensor and communication modules. This flexibility makes it a reliable and durable choice even in the most demanding process conditions.
Encased in a sturdy IP54 enclosure, the Smart Controller can be effortlessly mounted on walls, pipes, or panels. Its hinged door, equipped with anti-tamper indication, provides unhindered access to the communication and sensor modules, streamlining the commissioning and maintenance processes.
This UV-Vis optical water quality sensor measures COD, BOD and TSS using full-spectrum absorbance from 190 to 720 nm wavelength. Designed for continuous online monitoring, it features a high-precision photodetector placed at 180° to capture transmitted light and correlate absorbance to organic load and suspended solids. With multipoint calibration function, the sensor delivers accurate results across diverse wastewater and industrial effluent streams.
For industrial processes like Boilers & Furnaces, a remote-monitoring capability allows maintenance departments to see fault information and observe patterns of issues over time. Without the need to perform local monitoring, technicians can proactively troubleshoot the problems that lead to process disruptions, unplanned downtime and lost profits. This includes the ability to diagnose issues from anywhere and arrive at the machine ready to make a fast repair, so production systems stay operational and optimized.
Axis Environment Monitoring System is one of the leading cloud-based Centralized Environment Monitoring System. Axis Analytics provides unmatched functionality by gathering data from remote sensors and analyzers and provides real-time data on a single dashboard. Being cloud-based, Axis Analytics is accessible from anywhere, can be used on multiple devices, is extremely easy to use, and provides customizable MIS and visual GUI, along with multiple downloadable formats.
Axis Plant Dashboard is a cloud-enabled platform that integrates data from analyzers, instruments, utilities, and infrastructure systems into a single interface—enabling real-time visibility, faster decision-making, and improved plant performance.
Axis presents Boiler OptiMAX to optimize, control, and automate the entire boiler operation, which effectively helps the boiler users and boiler OEMs, boiler users can save a significant amount of money and effort just by optimizing the boiler operations with Boiler OptiMAX, and the boiler OEMs can provide a top-notch boiler automation solution to their customers, The Boiler OptiMAX provides data insights with real-time data, the users can monitor the real-time and historical data with the help of onboard HMI screens, and as per the customer's requirement the Boiler OptiMAX can be integrated with SCADA and it can also publish the data to Cloud, The Boiler OptiMAX monitors major parameters of the boiler (e.g.stack gas temperature, blowdown TDS, feed water temperature, fuel flow, steam flow, combustion air flow, flue gas oxygen, etc.)
Achieve consistent product quality and optimize blending operations with an advanced analyzer-based solution for fuels such as MS, HSD, and Naphtha. The system delivers real-time measurement of key properties including density, viscosity, RVP, and distillation, enabling precise control and reduced product giveaway. Designed as a complete integrated package, it enhances efficiency, accuracy, and profitability.
Enhance emission control and meet environmental standards with a robust analyzer solution for flue gas desulphurization processes. Integrated with data acquisition systems and CPCB connectivity, it continuously monitors parameters like SOx, NOx, CO, CO₂, and O₂. Suitable for power and process industries, this solution ensures reliable performance, regulatory compliance, and efficient pollution control.
Monitor emissions reliably even in the harshest conditions with an extractive dilution CEMS solution. By extracting, filtering, and diluting flue gas before analysis, the system ensures accurate measurement of pollutants such as SO₂, NOx, CO, CO₂, and particulates. Its low maintenance design, ability to handle high moisture and dust, and suitability for hazardous areas make it a cost-effective and dependable choice for continuous emission monitoring.
A Sulfur Recovery Plant serves to convert hydrogen sulfide (H2S) in an incoming gas stream into elemental sulfur. Sulfur recovery plants are required to recover 99.99% of the total sulfur that is introduced into the plant. Emissions regulations are becoming more stringent with each year that passes, which is why high-quality industrial analysis equipment in Sulfur Recovery Plants is of major importance.
Sulfur Recovery Unit is basically process of converting H2S into elemental sulfur by the Modified Claus Process.
A Hot Extractive Continuous Emission Monitoring System (CEMS) is a type of emission monitoring system where flue gas is extracted from a stack and kept at high temperature throughout the sampling path until it reaches the analyzer.Ensure accurate, real-time emission monitoring with a hot extractive CEMS engineered for demanding industrial applications. Featuring heated sampling lines and automated extraction, the system provides precise measurement of gases such as NOx, SO₂, CO, CO₂, o2, THC and particulate matter. Ideal for power plants, refineries, and process industries, it ensures regulatory compliance while minimizing maintenance and downtime
Seamless Industrial Connectivity. Anywhere. Anytime.
In today’s connected industrial landscape, uninterrupted data flow and secure remote access are critical to operational efficiency. Our IoT Gateway solution bridges the gap between field devices and cloud platforms—enabling real-time monitoring, remote diagnostics, and centralized control across geographically distributed assets.
Built to deliver reliability, scalability, and seamless IT-OT integration, this solution empowers industries to operate smarter, faster, and more efficiently.
Our client wanted to monitor the wind mill parameters from their various different sites to one central unit over SCADA Remotely. As wind mill farms are located in coastal areas the best possible solution of communication would be over GSM/GPRS.
Our client working for Water treatment plant of Rajasthan Government. They wanted to log field parameters, Remote Programming of their AB PLC as well as Remote Monitoring of all the data from different WTP plants & pumping stations over SCADA from there Vadodara Head office
In today’s industrial landscape, real-time visibility and remote control are essential for efficient operations. Cloud BOX enables seamless connectivity between field devices and cloud platforms—providing centralized monitoring, data visualization, and secure remote access. Designed for multi-location deployments, it ensures faster decision-making, reduced downtime, and complete operational transparency.
Built to bridge field operations with cloud intelligence, Cloud BOX delivers a secure, scalable, and high-performance solution for modern industrial automation.
A solution for continuously monitor Gas transferred from Plant A to Plant B, where Plant A customer wants to measure transferred gas to Plant B , and Plant B peoples wants to monitor how much their tank got full on their SCADA System.
A solution to monitor their Material Testing Lab’s atmospheric data remotely as they needs to maintain Temperature and Humidity inside Testing Lab area.
This solution bridges the gap between physical storage and digital oversight. It automates the collection of critical data points—such as product levels, temperature, and pressure—across multiple tank farms and transmits them to a central, secure cloud environment.
The architecture relies on a "Field-to-Cloud" hierarchy:
This automation package is designed for large-scale inventory management where assets are geographically dispersed. By centralizing field data into a unified cloud interface, it eliminates the "visibility gap" between remote sites and the main control office.
This solution bridges the gap between physical storage and digital oversight. It automates the collection of critical data points—such as product levels, temperature, and pressure—across multiple tank farms and transmits them to a central, secure cloud environment.
The architecture relies on a "Field-to-Cloud" hierarchy:
Our Client which is into Hydrocarbon Engineering requires a solution for continuous monitoring/report generation of “Analyser data system”
A solution for tenant management and bill generation.
Solution for continuous monitoring/report generation of Generation, Station, And, Feeder line data in a Thermal Power Station”
Our client need to monitor the water level of DAM of their seven different dams location from Their central location. as the Dams & central Location are distant from each other, the best way of communication is over GSM/GPRS.
The data from the dam location (7 different RTU’s) are being transmitted to Central Server RTU via GSM/GPRS, further we have to converse it in IEC 60870-104 based Pre-Installed SCADA system with the central server over Modbus RTU.
Our client is System Integrator in Solar Solutions, where They supplied SCADA systems to ATHA Group for their 10 MW Solar Plant in Southern India. Here, they wanted to monitor data from Relay to SCADA.
Where Relays are communicates over IEC61850 protocol and SCADA communicates over Modbus TCP protocol. Hence they needed communicating device between IEC61850 and Modbus TCP protocols .
Our reputed MNC Conglomerate wanted to monitor data of Caterpillar 3516 Engine over SCADA in one of their CSD (Cutter Suction Dredger).
Caterpillar Engine communicates over SAE J1939 protocol and SCADA communicates over Modbus TCP protocol. Therefore they need device which can communicate between two different protocols – SAE J1939 and Modbus TCP.
Our Client required a solution for monitor/control of their “CNC Machines”.
Our Client required a solution to measure Tilt Angle of Wind Mill and need to control turbine in abnormal condition of Tilt Angle.
The attached diagram represents a Steam Methane Reforming (SMR) process for blue hydrogen production, with CO₂ capture. Analytical instruments play a critical role across the SMR unit to ensure:
Provides highly precise and ultra-low-level quantification of Total Organic Carbon (TOC) in ultrapure water using advanced UV oxidation. The system delivers rapid, stable measurements with an extremely low detection limit, ensuring accurate monitoring of trace contamination in the most demanding high-purity water applications.
Delivers highly accurate, precise, and selective quantification of chlorine (Cl₂) gas using advanced UV FTLS spectroscopy. Designed with ultra-high selectivity, fast response times, and low detection limits, the system enables reliable real-time monitoring even in challenging industrial environments. Its non-destructive optical method ensures stable, low-maintenance operation, making it an ideal solution for process safety, emissions control, and continuous chlorine gas monitoring.
The AquaTrans AT600 flowmeter is a complete ultrasonic system for the measurement of: Potable Water, Wastewater, Sewage, Discharge water, Treated water, Cooling and heating water and Irrigation water.
The Model 3000RS Series is the next generation of online percent and trace oxygen analyzers from Teledyne Analytical Instruments. These analyzers are designed with the improved precision, sensitivity and accuracy of their predecessor, modern electronics and updated graphic user interface, all packaged into a compact and elegant chassis.
air.IQ simplifies the selection and installation of your moisture analyzer. Install the moisture probe, wire your power and outputs to the terminal strip, and connect your gas to the inlet fitting.
Aurora NOSS is a modified version of the Aurora analyzer. It is configured to enable installation within customized sampling systems. The Aurora NOSS consists of the laser absorption flow cell, sample pressure and temperature sensors, read-out electronics with local display and keypad interface. The unit is assembled on an epoxy coated or 316 SS plate. All system components are Class 1 Division 1 or ATEX/IECEx Zone 1 certified.
Panametric’s Aurora series of moisture analyzers uses tunable diode laser absorption spectroscopy (TDLAS) to rapidly and accurately measure moisture in a variety of background gases. The Aurora TransPort, the latest addition to the series, is a battery operated, moveable analyzer that can be taken into the field to directly measure moisture content of natural gas and other process gases. The unit is assembled into a rugged and transportable case with a telescoping handles and wheels.
The TransPort is ideal for spot checking the performance of natural gas processing and drying systems, gas storage facilities, compression stations, refinery processes, heat treating furnaces, instrument air and more. It is ideally suited for field verification of permanently installed moisture analyzers and transmitters.
Historically, clamp-on flow metering was limited to liquids because existing methods could not work on metal pipes containing gases. Several years ago Panametrics developed a new technology that extends all the benefits of clamp-on flow metering to gas measurement. This breakthrough clamp-on gas flowmeter technology has continued to improve, resulting in the second generation of the DigitalFlow GC868 flowmeter. This remarkable ultrasonic flowmeter works with gases at high or low pressure in pipes made of metal and most other materials. The DigitalFlow GC868 flowmeter can be used to measure the flow of any gas. It is especially useful for metering erosive, corrosive, toxic, high-purity or sterile gases, or in any application where penetrating the pipe wall is undesirable. Since no tapping or cutting of the pipe is required, permanent installation costs are significantly reduced. The meter has no wetted or moving parts, rarely requires maintenance, causes no pressure drop and has very wide rangeability. The new meter was tested extensively on metal tubes with diameters as small as 0.75 in (20 mm) and pipes as large as 24 in (600 mm). Suitable applications for this meter include flow measurements of air, hydrogen, natural gas, and many other gases. Using patented Correlation Transit-Time™ detection techniques, demonstrated accuracy is superb at better than ±2 percent of reading with ±0.5 percent repeatability. A DigitalFlow GC868 system comprises the DigitalFlow GC868 electronics, a pair of advanced clamp-on gas ultrasonic transducers, a preamplifier, and a clamp
The TransPort PT878GC flowmeter is a highly versatile, self- contained, portable transit-time system with options and accessories to meet a variety of gas flow measurement needs. Its compact size, lightweight, rechargeable battery pack, and universal power supply charger make it the ideal go anywhere flowmeter. Historically, clamp-on flow metering was limited to liquids because existing methods could not work on metal pipes containing gases. Panametrics developed new technology that extends all the benefits of clamp-on flow metering to gas measurement. This remarkable ultrasonic technology works with gases at high or low pressure in pipes made of metal and most other materials. The TransPort PT878GC flowmeter can be used to measure the flow of any gas. It is especially useful for metering erosive, corrosive, toxic, high-purity or sterile gases, or in any application where penetrating the pipe wall is undesirable. Since no tapping or cutting of the pipe is required, permanent installation costs are significantly reduced. The meter has no wetted or moving parts, causes no pressure drop and has very wide rangeability. The new meter was tested extensively on metal pipes with diameters as small as 0.75 inches (20 mm) and as large as 24 inches (600 mm). This meter is suitable for measuring th
The HygroPro XP moisture transmitter is a compact, 4–20 mA transmitter designed to meet the needs of the most demanding hazardous area applications. It features an integrated backlit display with a six-button programmable keypad, housed in an IP66/Type 4X rated explosion proof enclosure. The integrated display and keypad allow easy navigation of the software for configuration of the probe measurement, analog and digital (HART) output, and other user functions and diagnostics. The HygroPro XP has built-in multi-drop networking capability via the digital HART interface that allows multiple units to be connected on a single network.
Panametrics aluminum oxide moisture probes have set the standard of performance and value in industrial moisture measurement for more than 60 years. The IQ.probe is coupled to the Panametrics dew.IQ hygrometers by an interconnecting cable. Ease of use, wide measurement range and rigorous calibration standards make these systems the preferred choice for industrial moisture measurement worldwide.
Panametrics aluminum oxide moisture probes have set the standard of performance and value in industrial moisture measurement for more than 40 years. In use, M Series moisture probes are coupled to Panametrics hygrometer consoles by an interconnecting cable. Ease of use, wide measurement range and rigorous calibration standards make these systems the preferred choice for industrial moisture measurement worldwide.
Panametrics aluminum oxide moisture probes have set the standard of performance and value in industrial moisture measurement for more than 40 years. In use, the Moisture Image Series probe is coupled to Panametrics hygrometer consoles by an interconnecting cable. Ease of use, wide measurement range and rigorous calibration standards make these systems the preferred choice for industrial moisture measurement worldwide.
The Moisture Target Series 6 is an economical, single channel, aluminum oxide hygrometer in the Moisture Series line of analyzers. It is intended for OEM applications requiring low-cost, accurate, real-time moisture measurement.
