AC/DC Current Transducers T201DCH50-LP

T201 Series includes AC/DC current transducers designed to convert measured current value (up to 300 A) into a 4..20 mA or 0..10 V industrial normalized signal. Most of T201 Series is UL certified and it is characterized by low power consumption, measuring range freely settable via DIP-switches and high accuracy class avoiding thermal drift. T201 Series is available in 12 models with different measuring principles: average rectified, magnetic balance (patented technology), Hall Effect or TRMS with bipolar input range. Three models include an RS485 port upporting Modbus RTU protocol.

Description

  • Ac/dc current transducers with 4-20 ma output.
  • Ac/dc hall effect current transducers with 0-10 v output.
  • Ac/dc hall effect current transducers with 4-20 ma output.
  • Ac/dc hall effect current transducers with 0-10 v output / modbus interface.
The Transducers that use the measurement based on magnetic induction technology are long life devices thanks to the principle of measurement that avoids thermal drifts and which exploits the generation of an induced current on the transducer output, through the variation of a magnetic field. A direct use will be possible without any external shunts, even for pulsed currents.When a magnetic field is applied perpendicularly to a conductor, a voltage is generated transversally to the direction of the current flow. The Hall Effect Current Transducers are used as alternative to shunt when dealing with high voltages and high galvanic isolation.
Power Supply : Loop powered (9-28 Vdc)Power Consumtption : < 22 mAIsolation / Protection : 3 kVdc (on bare conductors)Protection degree : IP20Settings : DIP switchWeight : 47 g

Datasheet

No images found.