Place to Work

POWER METERS S203TA-D and S203RC-D

 HomeAxis India  Products  Automation & IOT  Seneca | Automation Interface  Energy Meters  POWER METERS S203TA-D and S203RC-D
16 S203TA D 1604930768

Models S203TA-D and S203RC-D are a complete three-phase energy analyzers with display, suited for use

with up to 600Vac voltage range (without a TV transformer), and max current equal to 5A (without a TA transformer) connected to the inputs. A double serial interface (USB or RS485) it’s also available (Modbus RTU protocol).

Analog and digital outputs can be connected to the electrical measure.

Categories: , ,

Description

    • Energy values backup (FeRAM backup values without battery need).
    • Last screen page displayed backup (FeRAM backup without battery need).
    • Easy configurable by free configuration software or by display menu.
    • RS485 serial communication with MODBUS-RTU protocol, maximum 32 nodes.
    • USB serial communication with Modbus RTU protocol for registers access and configuration.
    • High precision: 0,2%class (S203TA-D).
    • Protection against ESD discharge up to 4 kV.
    • Measure input insulation: 4000 Vac towards all the other circuits.
    • Insulation between communication and power supply: 1500Vac.
    • Insulation between retransmitted output and power supply: 1500Vac.
    • Analog output signal settable in voltage or current.
    • Digital output pulse signal for Energy or Energy sign.
    • Possibility for connection and management by external CTs with 5A output.
    • Possibility for connection and management by external VTs.
    • All kind of insertion possible: single phase, Aron, 4-wires, 3-wires .
    • Possibility to compensate errors caused by frequency change in places where network frequency is not stable (frequency changes > 30 mHz).
    • USB Firmware update
    • Easy-wiring of power supply and serial bus by means of the bus housed in the DIN rail.
    • S203RC-D can be used with rogowski coil of various full scale
    Power Supply : 10-40 Vdc, 19-28 Vac (50-60 Hz) Power consumption : 2,5 W Status indicator : Power supply, Fail, RS485 communication Display : Front LCD 2 lines x 16 characters alphanumeric (backlighted) Accuracy class  : 0,2% Insertion Type : 1- phase, 3-phase Aron, 3- phase with 4 wires

    Datasheet

    No images found.

    View Blog