Description
- Small size.
- Low weight.
- Low noise emission.
Before putting hydraulic or lubrication systems into service, the entire system should be flushed. Depending on the application, low viscosity flushing oil or the actual operating oil may be used. The purpose of flushing the system is to protect system components externally via mobile filtration units to ensure residue from assembly is removed. However, these mobile filtration units are also used to for the initial system fill or when changing the oil. The filtration units are quiet and compact, with an easy to transport design.
- High vol. efficiency.
- Good suction performance.
- Gerotor principle.
- Not susceptible to contamination.
- Low pressure filter with a wide separation range and high filtration capacity.
| Pump | : Contaminant-resistant gerotor pump |
| Colour | : Motor RAL 7024/frame RAL 5002 |
| Operating fluids | : Mineral oils per DIN 51524 |
| Operating oil temperature | : Max. 50 °C, briefly 65 °C |
| Seal | : Perbunan (NBR), or Viton (FPM) on request |
Datasheet |
|
No images found.
