Description
- Power Supply 80-265 Vac , 10-40 Vdc / 19-28 Vac.
- 4-digit LED display, high brightenss.
- Analog Input: mA, V, Ohm, Anti-bumper filter.
- Signal generator function.
S311G is a digital indicator with analog input and voltage / current generator. There are 2 different operating modes. In automatic mode S311G measures an analog value and retransmits it to the output.
In manual mode a setpoint is turned into a generated value by the output. In manual mode and switching from automatic to manual mode (or vice versa) it is available a signal attenuation feature (antibumper) in order to avoid actuator hammer or dangerous voltage / current surges.
S311G is a digital indicator with universal input including voltage, current and potentiometer.
- Automatic / Manual operating mode.
- Settings by front keys.
- The device is expandable with optional ModBUS board and allows programmable re-transmision of measured value on isolated analog output in voltage or current mode.
Power Supply : 80-265 Vac (-H version) 10-40 Vdc / 19-28 Vac (-L version)
Power Transducers : Max 18 V, 25 mA
Max Consumption 1,5 W
Isolation : 1.500 Vac
Noise rejection : 50-60 Hz
Communication interface : RS485, ModBUS RTU, max 32 nodes (optional board)
|
Datasheet |
|
No images found.