Signal Spltter S170

Module for conversion of measuring signals with galvanic separation, with two outputs galvanically insulated both from the input and from each other. Insulation voltage between input and outputs and between output and 2500 Vac output via two linear optoisolators for separation of the signals. Widely used for conversion of easuring signals when the same signal, sometimes with different standards, has to be transmitted to two different instruments, keeping the circuits galvanically separate to prevent interferences, or when the load on the current loop is higher than the maximum drivable load.

Description

  • INPUT: a series of dip switches on the front panel permits selection of the 0 – 20 mA and 4 – 20 mA current inputs (with both active and passive connection) or the 0 – 5 Vdc, 1 – 5 Vdc, 0 – 10Vdc and 2 – 10 Vdc voltage inputs.
  • OUTPUTS: a series of dip switches on the front panel permits selection, independently for the two channels, of the 0 - 20 mA and 4 - 20 mA current output (with both active and passive connection) or the 0 - 5 Vdc, 1 - 5 Vdc, 0 - 10 Vdc and 2 - 10 Vdc voltage output.
  • The self-extinguishing Noryl case is the width of 4 DIN modules and is designed to fit on a 35 mm mounting rail (DIN 46277).

Power supply

115 / 230 Vac +/- 10% 50 / 60 Hz

Power consumption

1,5 VA

Stability

+/- 0,01% / °C

Linearity

+/- 0,25%

Datasheet

No images found.